Renaissance November Workshop Convention

[nilrehob]

This just came up in Google when looking for some EnergenX links:

Hi pentarbe, the following is a response from Rick Friedrich:

Personal Attacks against me for promoting Free Energy Technology.

Recently I decided to finally give a response to the slander of John
Bedini against me and set the record straight considering that he has
recently passed away and never bothered to clear up a slander he published
against me. I ignored this for about four years as he was the type to want
to fight about things and I wasn't going to satisfy him in that way. After
I recently posted a series of videos of John and I working together and
details about our relationship in these matters I expected some more
attacks which have now started. Here are my videos that give a little
sliver of the real story:

Why John Bedini and Rick Friedrich Parted Ways.

https://www.youtube.com/watch?v=1DJ-QH3h-xo

Bedini Tesla Switch, What's wrong with it? It KILLS Batteries!

https://www.youtube.com/watch?v=q1FyajzU3So

John C Bedini 14' Ferris Wheel Presentation at the Nov 2010 Renaissance
Charge Convention.

https://www.youtube.com/watch?v=BlcfSi0mT3U

John C Bedini 14' Ferris Wheel Construction Typical Day in the Shop Part 1

https://www.youtube.com/watch?v=Tf79Q0NXIn8

John C Bedini 14' Ferris Wheel Construction Typical Day in the Shop Part 2

https://www.youtube.com/watch?v=3Y7PHmSkQ6c

John C Bedini 14' Ferris Wheel Construction Pre-Convention Setup Part 3

https://www.youtube.com/watch?v=HBGmCLqBAvg

John C Bedini Motors Closeup from 2005. Original 1984 Tesla Switch

https://www.youtube.com/watch?v=kiHmn6-l7h4

[The next video only indirectly pertains to what I am saying here, and
that is that I had a close relationship with John and we did many videos
together like this.]
Howard Johnson's Original Trains Demonstration with John Bedini and Rick
Friedrich

https://www.youtube.com/watch?v=13zTJz3VXnM

The following in quotation was posted on a website and reposted on a
competitors forum by a person who is unwilling to share who they are,
which should be a sign that their attacks are cowardly and mistaken. See
if you can connect the dots:

“In the early to mid 2000’s, Rick Friedrich proposed a business deal to
EnergenX, Inc., a company headed up by a world famous electrical engineer,
John Bedini.”

In the mid 2000's I volunteered to help people in finding free energy
systems. Renaissance Charge was later started to sell battery chargers
invented by several people, one of whom was me. The idea of each charger
and much of its functionality was created by me. I never signed any
contract with any company pertaining to these chargers. They were a mutual
effort. I did the testing of them and it was my label that was always on
these chargers. There is no patent on these chargers. And Energenx patents
expired two years ago, and I never violated their patents with these
chargers. I have presented video evidence of these facts.

(continued here)

[pentarbe]

Rick Friedrich - R-Charge

This just came up in Google when looking for some EnergenX links:

https://rickfriedrich.wordpress.com

https://rickfriedrich.wordpress.com/contact/

[THEminoly]

Here you go:

[VIDEO]https://www.youtube.com/watch?v=sF4guRVRkQ8[/VIDEO]

This is one way to turn that 3PM kit into an overunity energizer.

[kippered]

Thanks for the reply Jeff, using 8 filar? nice does this seem to amplify the results? At the conference I was told that you can reduce the charging time of the coil with extra filars and have been looking forward to that test, but baby steps first...

I just got my replacement parts so I should have it up and running again tomorrow, then my fun begins

I have some nice wire wound pots for the trigger circuit, some new transistors and a bunch of other stuff to experiment and tweak the kit to the best of my abilities.

Good times!

[minoly]

Indeed nice work, I am having fun with my kit also but last weekend I brought it with me to show some people and one neon bulb bent a little and touched a tranistor during transport so when I fired it up for the demo I smoked it

Regardless I have some new parts on the way and will make it a little more portable this time

I noticed you have what looks like metal bent over the back of your drive coils. Does that help the strength of the magnetic field? Are the extra transistors just added in paralell to allow for more current to the coils when firing?

Hey kippered,
sorry to hear about your Neon situation. there's always a learning curve, eh - been there done that. we left the neons off and are living life on the edge. one wrong connection and it's see you latter "all 24 transistors".
each of the 3 coils (not gen coil) is a 9 filer. we only used 8 out of the 9 -- x 3 that makes 24 transistors.
we ran out of the welding rods. that bent metal thing was from another experiment we were doing, the welding rods are welded on
we'll have to order some more....


@ Jeff
Thanks

[kippered]

Are we having fun with our kits yet... here's another one with 24 transistors:
YouTube - min2oly's Channel

Patrick

Indeed nice work, I am having fun with my kit also but last weekend I brought it with me to show some people and one neon bulb bent a little and touched a tranistor during transport so when I fired it up for the demo I smoked it

Regardless I have some new parts on the way and will make it a little more portable this time

I noticed you have what looks like metal bent over the back of your drive coils. Does that help the strength of the magnetic field? Are the extra transistors just added in paralell to allow for more current to the coils when firing?

[Bit's-n-Bytes]

Are we having fun with our kits yet... here's another one with 24 transistors:
YouTube - min2oly's Channel

Patrick

Nice work Patrick!

Jeff

[minoly]

3PM kit on steroids

Are we having fun with our kits yet... here's another one with 24 transistors:
YouTube - min2oly's Channel

Patrick

[FrozenWaterLab]

Pault
I like your *thinking*

About a self runner. I think that bedini/cole bipolar circuit that triggers with a read switch could work.There they use the trigger coil as gen coil and feed the power back to battery during off time. Much like the watson machine. Then we could use the smallest rechargeable battery to get test results sooner. We don't need to pop back once a revolution but could wait till the capacitor reach 31V and pop it back much like John Bedini does on his ferris wheel, using a 32v zener and maybe a solid state relay or two transistors or scr.I am not to sure if this back popping method is the best when using the same battery.
I only arrived home today and pack my kit out an hour ago. I think I will try this circuit on it.
I would like to thank John Bedini and his team for what they brought to the table.
Also I need to thank Mathew, Bits and Dave for helping me out after my credit cards, money and drivers license got stolen at Seattle airport. Without you guys I would have been lost!!
I think we have to go sit down and re think the way we were experimenting and start all over doing it the "Non Linear" way. I am not to sure how we will do that but I am sure we will get there.
Example of non linearity was. The Watson machine having 8 coils and only seven magnets. (I wrongly thought it was to reduce cogging or drag)
And the second example was the 2 steel plates bent at different angles on the sides of the big coil like magnetic shields or something.
Oh and also the smaller neo magnet mounted scew on the inside of the huge ferrite magnets!

Also The smaller coils at the bottom were different distance from the big coil in the center one about a 1/4" further away and one about a 1/4" closer
Well No Tape-measure handy just best guess.
FrznWtr

[FrozenWaterLab]

The Saga of the Motor Kits

Hi All
I'm the culprit
A fellow had a copy of the previous 3 poll schematic and I said wow I'd like a copy Please. He allowed me to take it to the hotel staff and make a copy. I thought I would help out and made a bunch and took them to Rick and he had them passed out. Sorry it wasn't realized that their was a different transistor used. Did my best. I opted to have my kit shipped to me as I only had a carry on bag. Worried about having to explain all the electronics parts to airport security. sheash
I did available myself of buying the extra coils and made it home with them OK. I'm ordering the timing cog from truth in heart to complete the learning experience.
I really enjoyed myself. Met lots of people and learned a bunch. I spoke with many of the presenters and asked lots of questions.
I intend to get the info on Johns big wheel when it becomes available and will be going to the July convention.
I want to build an 8' version of johns wheel with 6 sets of the 3 coils like a huge 10 coiler haha. Ambushes huh well wish me luck anyway please.
I'm not sure if I understand it correctly or not but I did talk to John and asked a few questions. The wheel had two separate systems on it that showed two different things and I believe they worked separately like ether/or.
The small 2' inner, was to idle the wheel showing the torque of the 10 coil, right?
The 3 large coil set was the gen so to speak and I believe 14 joule from 3 pulses a second, would be 1209600 Joules a day was figured as posable output. Am I correct in that figure?
I think that would be about 5k watts an hour, is that right?
I heard John fretting that we needed to hurry our inspection of the running system as he was concerned the bats might overcharge and blow sense their were only 3 to take the output, even with the limited rpm they had set.
I'd love to see it at full working RPM wouldn't you all?

The electric Porsche also held my intrust and I spent some time speaking to
and brain picking the teck that had built it. I was asking if he were collecting the back emf off the motor or what and he said well were going to pull all this out and put that big window motor in it next. Thats when the magic will happen.
He spoke of from 150 miles a charge to maybe 450 miles. Now were talking.
I assume he was speaking of the window motor B kit. But I'm not sure on that.
If you ask me the magics already here with off the shelf parts to convert a vehicle and get 150 WOW. I got 3 small size junkers to work with, think I'll have to give it a try. I also want one of those window motor kits - Yah.

Well I'll close and give my opinion - Worth every cent - Great Professional people sharing and having fun. See ya in July I hope.

PS Rick cleared up my concern about all 5 bats charging on my SSG.
Nice to know others have experienced it also.
Best to all
FrznWtr

[FrozenWaterLab]

This is relevant to my interests!

I've been a lurker here for years, done some tinkering with various circuits like Imhotep's Radiant Oscillator, Stiffler's Exciter, Erfinder's curious rotary switch demonstrator for 568177, and recently a solid-state Bedini circuit using a trifilar coil wound on a K'Nex jig(cheap, consistent results!)
YouTube - trifilar winder test

Too Cool - Love it
FrznWtr

[aussieaussieaussie]

Hi All,

Was wondering if anybody who went to the conference would like to fill us in on the goss about the r-charge range.

Any reviews from people who have bought the solar version?
I thought someone by now would of done a comparison to similar models on the market.

Also, I heard someone hooked up a solar r-charge to a ten coiler.
What happened there?

Any more news from other people who have built the ten coiler?

Would love to hear more information about these products.

Thanks,

Ozy

[Aaron]

posts moved to 10 coiler thread

@All,

Quite a bit of that discussion on the 10 coiler has been moved to the 10
coiler thread. If there is any post that I moved there that needs to be
brought back here, let me know.

And if any more here needs to be moved there, let me know.

[minoly]

YouTube - min2oly's Channel

Here is another version w/ rubber band and brush commutator running.

YouTube - min2oly's Channel

[aussieaussieaussie]

Ok, I have posted my question on the ten coil thread.
I look forward to your reply!

Thanks,
Ozy