DIY PMG Generators cheap and easy to make whit in a day!

[Energy Creator]

@Brian

I placed my order today, let me know if it did not process, I did not see the atypical confirmation... it does show up in my Paylpal, though, so it should be fine. Thanks

Cheers
Kyle

Thanks
If you send me a e-mail to [email protected] i can look it up for you

Brian

[Energy Creator]

Hello,
When you say "high efficient Generators" what is actually the efficiency?
Your measurement or ZPF. Is there a paper with numbers/test conditions?
Thanks.

[barbosi]

So the efficiency is your subjective observation.

What you're saying is that the generator is a novel idea (never patented) and instead of paying the patent office's fees and hoping for royalties, you'd rather openly sell your idea using a DIY DVD. Is that it?

About the efficiency, I make the coil in a way that the magnets are continuously for 100% in action whit the copper winding. So you use all the magnetic energy of the magnets continuously.

I am not a guru in electric machines but all I know is that all machines use 100% action of winding with copper. Either between max flux and no flux, or max flux and max opposite flux, all take that advantage of being 100% continuously around magnets. Maybe you wanted to say the geometry of windings is different...?

I think its important because the magnets are 2/3 of the cost of the generator.

Then with $40 worth magnets all you need is $20 worth other materials - copper, housing, bearings, etc. with a grand total of $60 anyone can build a generator? Even that generator is 20W, never mind, anyone can expect not a huge power at that price...

And BTW regardless of efficiency, what is the output power of your generators? At least I'm sure this you have measured... The welding arc effect, one can have and even better with a microwave transformer. Or do you produce high voltage?

So I hope you understand the grounds of my inquiry.

Regards.

[Energy Creator]

Energy-Creator High efficiency DIY-generators

[Energy Creator]

P.S. there is a professor here in the Netherlands who is designing PMG generators most of his live, is very curious as well, he will review my DVD as well and will publish the outcome on the internet
I already send him a DVD.

He is a professor from the TU Delft!

I hope he likes it!

Brian

[barbosi]

Hi Brian,

Thanks for your honesty, a rare quality often viewed incompatible with marketing.

I bet your machines work nicely as motors too.

Regards.

[RAMSET]

Some very smart fellows

Brian
Perhaps its something in the drinking water over there?

A lot a very Smart people from your part of the world,And you are obviously one of them!
Thank you for sharing you inventions ...You are a wonderful example..I believe you will be paid back many times over!!
It is a Pleasure to read your posts and hear your great attitude!

We are also working on something open source that will help change the World this Coming year!
I'll keep you posted!

Thank you
Chet

[soundiceuk]

Thats a brilliant quality you have there Brian! I love this forum and the people like you on here!

Have you considered open sourcing it and asking for a 10% royality instead of you current business strategy?

The reason I say this is: The details and specs of the build can openly be discussed on this and 10000 of other forums. I guarantee you will make a exponential profit and the product design will also go through exponential change.

I would really look forward to your secret box disclosure at 10% royality too.


Brian, there are lots of intelligent people on this forum who know people with money who would commercialize your invention quickly.

If you open source it, your inventions will spread quicker by word of mouth onto many, many forums.

Please think about this very carefully and maybe you will believe what I am saying to be quality truth from one successful business man to another.

[john_g]

The Energy Creator DVD

Hi All

I have watched most of the DVD and it is really well made and shows the generator construction techniques step by step. Brian uses some novel and easy ways to overcome not having a lathe. The generator winding arrangement appears novel. Many of his techniques can be used for other like projects. So if people are thinking about buying it, I say it is worth the money and it is a true genuine product.

Regards

John

[Energy Creator]

[tecknomancer]

Great Design

Hi All

I have watched most of the DVD and it is really well made and shows the generator construction techniques step by step. Brian uses some novel and easy ways to overcome not having a lathe. The generator winding arrangement appears novel. Many of his techniques can be used for other like projects. So if people are thinking about buying it, I say it is worth the money and it is a true genuine product.

Regards

John

Yes I agree that is why I gave him a review for free on Zeropointfuel.com The way you wind the generator is unique and has great potential I think Brian should be applauded for his choice to release this information this way we need more people willing to take that leap of faith, or things will never change. I hope he makes decent money on his DVD sales it takes allot of effort to do a DVD.

I was thinking of water jet cutting some iron oxide,strontium carbonate block magnets, the flux field is extremely strong 45 lbs pulling force and less eddy currents with Ceramic magnets this style was used the in megawatt wind turbines awhile back Block Magnets 4'X6' cutting wedge shapes that make a long 16 segment cylinders I will run some small block test first.

[totoalas]

Yes I agree that is why I gave him a review for free on Zeropointfuel.com The way you wind the generator is unique and has great potential I think Brian should be applauded for his choice to release this information this way we need more people willing to take that leap of faith, or things will never change. I hope he makes decent money on his DVD sales it takes allot of effort to do a DVD.

I was thinking of water jet cutting some iron oxide,strontium carbonate block magnets, the flux field is extremely strong 45 lbs pulling force and less eddy currents with Ceramic magnets this style was used the in megawatt wind turbines awhile back Block Magnets 4'X6' cutting wedge shapes that make a long 16 segment cylinders I will run some small block test first.

Hi
thanks for the response
just like to ask if berriylium oxide magnets from magnetron of maicrowave oven having two ring magnets in them be useful in the generator build up coz i have 500 pcs in my collection and they are stronger than speaker magnets
thanks
totoalas

[totoalas]

Thanks
If you send me a e-mail to [email protected] i can look it up for you

Brian

Hi Brian

is there a chance that I can order from HSBC Visa card since only paypal is allowed?? tried 3 times without luck hope you can help me with the order

thanks totoalas

[Cherryman]

Brian
Perhaps its something in the drinking water over there?

A lot a very Smart people from your part of the world,And you are obviously one of them!
....
Chet

I live there as well, (Not claiming i'm smart ;-) But one of the reasons the people around here are as much involved in the attempts of OU is that in our country every single step is taxed, regulated and/or controlled.


So far my little rant, excuse my off topic reply.

Edit: Too much offtopic stuff, got a bit carried away.

[RAMSET]

Adversity is the father of change

One thing is for certain ,There will always be Taxes [give onto Ceasar ]
And once power becomes more accessible to the masses ,I am certain they will put a tax on it ,However opportunities will open up that will change our world and its dynamics Forever.....

One thing I do Know.. I wouldn't trade with a family in Somalia.
That Has To Change..............

None of us are free .Until everyone of us are free!!
Its good to Have Goals!

Chet