Tiger's Device 0.150-1Kwt replicant

[Duncan]

The Ray of Discovery - Nikola Tesla on Vimeo

[cikljamas]

No i've wounded it like this...

Well, if that is the detail in which the devil is..., after all, i did not say it doesn't work at all (how could i assert that after just one or two days of experimenting?), i just said that I did not achieve OU, and I still believe it is possible, but as it is well known to all of us who are dealing with electronics a lot: the devil is really in details!!!

So, maybe i proceed with this experiment after someone push me forward, inspiring me with some really inspiring knowledge like it is a new manner of winding joky...

But first i just have to take a little brake...

Cheers!

[Michael John Nunnerley]

Explination

Now for an explination of what that coil does

You will see that it is NOT A CONTINUOUS COIL, it only has a capacitive coupling via the dielectric "insulation on the wire". HV @ HF is fed into this and you get a dielectric breakdown which vibrates in this case the ferrite, it also does other things to the ferrite which I will not go into here.

With the other frequency coils we create a mix which creates a very wide band of frequencies at a low voltage and low current, our real input eg 12v. The HV only does what I stated before.

Now what do we have, a wide band low voltage and current energising the ferrite, but the ferrite is already stressed, the molecules are vibrating.

Now we have vibrating electro magnetic current in the ferrite, the configuration of the ferrite is like a flyback, the two halves are broken with a cardboard spacer.

The pickup coil "output", is a coil of near zero impedance due to how it is wound. It will pick up all the stored energy which has been created in the ferrite and discharge like a charged up cap "lot more current", how you use that afterwards is another circuit to bring the HF down to a usable level for real power and hopfully more than you put in

Mike

[Michael John Nunnerley]

Hi guys!
As i promised i have tried Mike's schematic with one 250-450 khz driver, and one flyback driver (13 khz), on the 15 coil i was using mains 50 hz and bulb, but all i have accomplished so far is this. Ah...what the heck, i didn't achieve OU.

Well, since it doesn't seem we are going to achieve OU till Christmas and i am getting sick from that OU wishing, allow me to wish you something else:Marry Christmas, just in case that i forget to do that in a month or so...

Cheers!

Bonus clip

Have you wound your HV coil like this? I don't think so

ImageShack® - Online Photo and Video Hosting

Mike

[cikljamas]

Mikes schematic

Hi guys!
As i promised i have tried Mike's schematic with one 250-450 khz driver, and one flyback driver (13 khz), on the 15 coil i was using mains 50 hz and bulb, but all i have accomplished so far is this. Ah...what the heck, i didn't achieve OU.

Well, since it doesn't seem we are going to achieve OU till Christmas and i am getting sick from that OU wishing, allow me to wish you something else:Marry Christmas, just in case that i forget to do that in a month or so...

Cheers!

Bonus clip

[MonsieurM]

Originally Posted by MonsieurM
By the way one of the crystals i found through my research and has a good potential is:

Tourmaline - Wikipedia,

Hi MonsieurM,

Page here you might find interesting.

http://www.cheniere.org/correspondence/042011.htm

Specifically : "The Klimov free energy systems are easily made self-powering, since there are various materials (such as tourmaline) which continually and freely emit the necessary "incident photons" that are input to the tiny solar cells. Just mix a tiny bit of one of those materials in the nanocrystalline buildup, and the photons inputted are thereafter and forever furnished freely, as thus is the tremendous output electrical energy from the very small Klimov devices."

Regards

Thank you Ren, I appreciate much the help

[Ganzha]

Successful Replican of Tiger Device Practical

here practical deviced that had been replicader from Tiger device with Yoki

[ren]

By the way one of the crystals i found through my research and has a good potential is:

Tourmaline - Wikipedia, the free encyclopedia

Hi MonsieurM,

Page here you might find interesting.

http://www.cheniere.org/correspondence/042011.htm

Specifically : "The Klimov free energy systems are easily made self-powering, since there are various materials (such as tourmaline) which continually and freely emit the necessary "incident photons" that are input to the tiny solar cells. Just mix a tiny bit of one of those materials in the nanocrystalline buildup, and the photons inputted are thereafter and forever furnished freely, as thus is the tremendous output electrical energy from the very small Klimov devices."

Regards

[Duncan]

concentrate.....

Mike I'm Delighted to hear mark is showing some progress --- Blessings, Girls and boys I want you to look at each of these, I want you to take particular notice of the Laser straight blue line of light ground to ceiling,
The first I would like you to consider is the picture I showed you before from Floyd Sweets machine taken over 30 years ago
1/ https://lh6.googleusercontent.com/-t...2520floyyd.png

2/ The second is Tariels machine which triggered this investigation over on OU.com
TARIEL KAPANADZE EVERYTHING .. WE KNOW FOR NOW..swf - YouTube

3/ Is some of the determined work of Thane Heins
ThaneCHeins's Channel - YouTube

4/ here is a small Hateum clone running
New Free Energy by George Mitchell - YouTube

5/Here is F.M Chalkalis and his gift to us all
F.M.CHALKALIS ENERGY MULTIPLIER - YouTubeThaneCHeins's Channel - YouTubeI want an answer!

[Dave45]

Give us a little time, which is what I do not have much of at the moment, but I do have time to think. I know what is require to make this work, the problem is how to put it together and in a cheap EASY, uncomplicated form.

As far as using mains, you have two things you can do, use mains and use 1amp @ 24v which is 24watts and run an appliance at say 200watts or use batteries and an inverter, the batteries charged by solar or maybe recharged by the same system, the later is open to experiment "maybe a battery swap system" that is the least of the problems. My suggestion of the mains was for the 50-60hz AC in front of your eyes "no need for complicated sig gens".

Well I am tired and going to eat

Mike

PS Mark is improving, maybe April next year he will come out of the hospital, so we have been told. Still can't walk as they have to get his leg working properly, especially the foot. His short term memory has come back but still a long way to go with his speaking etc.

Hope you get well soon Mark

[MonsieurM]

tthis was posted a while back:

Superconducting diamond turns up in Russia - physicsworld.com

So why does silicone become superconductive when doped with boron?

from the article:

Physicists at the Russian Academy of Sciences are claiming to have created a form of diamond that superconducts. Vladimir Sidorov and colleagues say that their material, which they made by doping carbon with boron at high temperatures and pressures, exhibits bulk superconductivity below around 4 kelvin and remains a superconductor in strong magnetic fields (E A Ekimov et al. 2004 Nature 428 542).This is the first time that boron-doped diamond -- which is normally a semiconductor -- has shown superconducting behaviour.

By the way one of the crystals i found through my research and has a good potential is:

Tourmaline - Wikipedia, the free encyclopedia

Tourmaline is a crystal boron silicate mineral compounded with elements such as aluminium, iron, magnesium, sodium, lithium, or potassium. Tourmaline is classified as a semi-precious stone and the gem comes in a wide variety of colors. The name comes from the Sinhalese word "Thuramali" (තුරමලි) or "Thoramalli" (තෝරමල්ලි), which applied to different gemstones found in Sri Lanka.

[garrypm]

Precisely that which I posted over at OU.

After watching Bearden's - Floyd Sweet's Secret, one can not help
but think that Floyd's imposing of the 60hz resonance into the BORON magnets "MEMORY",
then simply apply a small 10vac 60hz signal into a coil between the two mags,
and bingo! the other coil produces copiuos amounts of power.

Only difference is - coaxing the ferrite to behave like the boron mags during
operation instead of "CONDITIONING" before hand.

Garry

[MonsieurM]

this was posted a while back:

Superconducting diamond turns up in Russia - physicsworld.com

So why does silicone become superconductive when doped with boron?

from the article:

Physicists at the Russian Academy of Sciences are claiming to have created a form of diamond that superconducts. Vladimir Sidorov and colleagues say that their material, which they made by doping carbon with boron at high temperatures and pressures, exhibits bulk superconductivity below around 4 kelvin and remains a superconductor in strong magnetic fields (E A Ekimov et al. 2004 Nature 428 542).This is the first time that boron-doped diamond -- which is normally a semiconductor -- has shown superconducting behaviour.

[Duncan]

Floyd ...a gent

Duncan

Funny that you mentioned Floyd Sweet. I have been investigating his VTA for years and last year when I saw Tiger device then ...whoaaa! Things become quite clear.

[Michael John Nunnerley]

Duncan, you are the man, here is one beautiful song for all of us, performed by the best pop singer of all times who comes to visit my town for the first time.

It is never too late i guess, we could say for our devices too: it is never too late or All's Well That Ends Well (Shakespeare).

Love and peace!

Now, let's try Mikes schematic...

Give us a little time, which is what I do not have much of at the moment, but I do have time to think. I know what is require to make this work, the problem is how to put it together and in a cheap EASY, uncomplicated form.

As far as using mains, you have two things you can do, use mains and use 1amp @ 24v which is 24watts and run an appliance at say 200watts or use batteries and an inverter, the batteries charged by solar or maybe recharged by the same system, the later is open to experiment "maybe a battery swap system" that is the least of the problems. My suggestion of the mains was for the 50-60hz AC in front of your eyes "no need for complicated sig gens".

Well I am tired and going to eat

Mike

PS Mark is improving, maybe April next year he will come out of the hospital, so we have been told. Still can't walk as they have to get his leg working properly, especially the foot. His short term memory has come back but still a long way to go with his speaking etc.