Announcement

Collapse
No announcement yet.

The Golden Tractate of Hermes Trismegistus applied to electromagnetism

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • MonsieurM
    replied
    I know someone who took pictures of them

    Thomas Burton Kinraide
    (1864 - 1927)


    Turn Of The Century Electrotherapy Museum - Original 8x10 and 11x14 Glass Plate Negatives of Electrical Discharges - Thomas Burton Kinraide - ca. 1897

    Original ca. 1897 Glass Plate Negatives:
    A Rare Collection Of Spark Discharge Photos,
    Recovered From Kinraide's Underground Laboratory


    Last edited by MonsieurM; 11-22-2011, 07:28 PM.

    Leave a comment:


  • MonsieurM
    replied
    There was an attribute which baffled Tesla for a time. His measurements showed that there was no current flowing in the long copper �secondary� coil. Voltage was rising with every inch of the coil, but there was no current flow in the coil itself. Tesla started to refer to his measured results as his �electrostatic induction laws�. He found that each coil had its own optimum pulse duration and that the circuit driving it needed to be �tuned� to the coil by adjusting the length of the pulses to give the best performance.
    _______________
    this sounds very much like Harmonic Math (also applicable in Rodin Math ) of Bruce Cathie

    Leave a comment:


  • MonsieurM
    replied
    Originally posted by MonsieurM View Post
    Magneto-optic effect - Wikipedia, the free encyclopedia

    A magneto-optic effect is any one of a number of phenomena in which an electromagnetic wave propagates through a medium that has been altered by the presence of a quasistatic magnetic field. In such a material, which is also called gyrotropic or gyromagnetic, left- and right-rotating elliptical polarizations can propagate at different speeds, leading to a number of important phenomena. When light is transmitted through a layer of magneto-optic material, the result is called the Faraday effect: the plane of polarization can be rotated, forming a Faraday rotator. The results of reflection from a magneto-optic material are known as the magneto-optic Kerr effect (not to be confused with the nonlinear Kerr effect).

    In general, magneto-optic effects break time reversal symmetry locally (i.e. when only the propagation of light, and not the source of the magnetic field, is considered) as well as Lorentz reciprocity, which is a necessary condition to construct devices such as optical isolators (through which light passes in one direction but not the other). (The other, less useful, way to break time reversal symmetry is to rely upon absorption loss.)

    Two gyrotropic materials with reversed rotation directions of the two principal polarizations, corresponding to complex-conjugate ε tensors for lossless media, are called optical isomers.

    Kerr Rotation and Kerr Ellipticity

    Kerr Rotation and Kerr Ellipticity are changes in the polarization of incident light which comes in contact with a gyromagnetic material. Kerr Rotation is a rotation in the angle of transmitted light, and Kerr Ellipticity is the ratio of the major to minor axis of the ellipse traced out by elliptically polarized light on the plane through which it propagates. Changes in the orientation of polarized incident light can be quantified using these two properties.

    Circular Polarized Light




    from Dave's post:


    This train of very short uni-directional pulses causes a very strange field to expand outwards. This field resembles a stuttering electrostatic field but has a far more powerful effect than would be expected from an electrostatic charge. Tesla was unable to account for the enormous voltage multiplication of his apparatus using any of the electrical formula of his day. He therefore presumed that the effect was entirely due to radiant transformation rules which would have to be determined through experimental measurements. This he proceeded to do.

    Leave a comment:


  • MonsieurM
    replied
    you should also read this post by Dave



    an excerpt

    Additional experiments showed that the effects were altered by adjusting the duration of the electrical pulse. In each instance, the power of the radiated energy appeared to be constant irrespective of the distance from his apparatus. The energy was in the form of individual longitudinal waves. Objects placed near the equipment became powerfully electrified, retaining their charge for many minutes after the equipment was switched off.


    here is the interesting part:

    Additional experiments showed that the effects were altered by adjusting the duration of the electrical pulse. In each instance, the power of the radiated energy appeared to be constant irrespective of the distance from his apparatus. The energy was in the form of individual longitudinal waves. Objects placed near the equipment became powerfully electrified, retaining their charge for many minutes after the equipment was switched off

    Leave a comment:


  • MonsieurM
    replied
    Originally posted by Dave45
    Im still stuck on glass it has some interesting quality's, Its effectively separating the magnetic field from the electric field, this is very interesting.

    Glass caps are hard to get but easy to make

    What if we made a circular cap with aluminum and glass plates, aluminum connected with strips every other one.
    Then inserted this into a coil's core, a sink? would we have to pulse the coil?
    Or would the glass strip the electric field from the magnetic field lines effectively, could we increase the field with a well insulated iron rod through the center?
    Dave I think, you'll like this one:

    When it comes to churning out electrons, metal glass beats plastics

    By adding carbon nanotubes to a glass-like metal compound, researchers have devised a new breed of field emission electrodes. This technology, which produces a stream of electrons, may have promising applications in the consumer electronics industry.
    -------------side note:

    the following website relates to quartz and the various colors: (crystal battery )

    colored varieties of quartz
    Last edited by MonsieurM; 11-21-2011, 05:27 PM.

    Leave a comment:


  • MonsieurM
    replied
    Dr. Hildy: Far-Infrared, SuperLight and Beyond - YouTube

    I recommend you listened to it if you have time...some very interesting research info is being talked about

    talks about semi metal @ 15 min 26 magneto optical study

    and @ 27 min listen to the definition of Superlight , if you read this post http://www.energeticforum.com/167694-post1341.html you'll see that it is the same definition


    -------------------also

    Magneto-optic effect - Wikipedia, the free encyclopedia

    A magneto-optic effect is any one of a number of phenomena in which an electromagnetic wave propagates through a medium that has been altered by the presence of a quasistatic magnetic field. In such a material, which is also called gyrotropic or gyromagnetic, left- and right-rotating elliptical polarizations can propagate at different speeds, leading to a number of important phenomena. When light is transmitted through a layer of magneto-optic material, the result is called the Faraday effect: the plane of polarization can be rotated, forming a Faraday rotator. The results of reflection from a magneto-optic material are known as the magneto-optic Kerr effect (not to be confused with the nonlinear Kerr effect).

    In general, magneto-optic effects break time reversal symmetry locally (i.e. when only the propagation of light, and not the source of the magnetic field, is considered) as well as Lorentz reciprocity, which is a necessary condition to construct devices such as optical isolators (through which light passes in one direction but not the other). (The other, less useful, way to break time reversal symmetry is to rely upon absorption loss.)

    Two gyrotropic materials with reversed rotation directions of the two principal polarizations, corresponding to complex-conjugate ε tensors for lossless media, are called optical isomers.




    Kerr Rotation and Kerr Ellipticity

    Kerr Rotation and Kerr Ellipticity are changes in the polarization of incident light which comes in contact with a gyromagnetic material. Kerr Rotation is a rotation in the angle of transmitted light, and Kerr Ellipticity is the ratio of the major to minor axis of the ellipse traced out by elliptically polarized light on the plane through which it propagates. Changes in the orientation of polarized incident light can be quantified using these two properties.

    Circular Polarized Light

    Last edited by MonsieurM; 11-21-2011, 04:20 PM.

    Leave a comment:


  • MonsieurM
    replied
    I found this post relatively interesting:

    Victor Schaubergers implosion engine solved !

    .

    Initially this post was indicating a direct connection between the Schauberger effect and sonoluminiscence.

    I have to back one step on this one, since sonoluminiscence generates heat, and Victor Schaubergers
    implosion engine kept a steady 4 degree Celsius in a vacuum system.


    The cavitation phenomenon is a still a highly interesting phenomenon since a NTFFA differential seems to
    be created by intereference parameters in the micrometer range.

    But there is a huge difference between Victor Schaubergers "implosion engine" and the works of the other guys
    mentioned in the link. Richard Clem and his followers were apparently working with high resistance effects causing
    both heat and high pressures in their constructs, resulting in a rather conventional use of resistance to make their
    engines rotate.

    Victor Schauberger was doing it the other way around. No heat of any kind, and no pumps creating any pressure
    of any kind was aloud in his concept.


    He just rotated a cone shaped spiral tube in a vacuum system with his so called virginized water,Victor Schaubergers implosion engine was employing a gold plated tube shaped into a cone-formed spiral
    with the wide part of the cone shape upwards and the narrow part of the cone shape pointing downwards.
    The spiraling tube was also decreasing in tube diameter on its way down to the bottom part.

    This cone shaped spiral was mounted onto a verical shaft inside a gold plated vacuum container together
    with specifically prepared water at 4 degrees Celsius.

    The spiral cone was then put into rotation inside the vacuum chamber partly filled with the water.
    Without employing any outside pressure, the water began moving into the upper part of the tube spiral by
    sheer rotation, down through the spiraling tube and out through the narrow bottom part.

    Since water molecules are bipolar and proved to form crystal patterns even in its fluid state, one can
    easily understand their ability to interact as cogwheels, creating an organized movement when transported
    through a converging spiral tube.


    At the narrow bottom end of the cone shaped spiral tube system, the water molecules were spiraling
    into ever more narrow trajectories until reaching the critical interference point which I believe is closely
    related to what happens in the Casimir effect.

    The blue-violet light surrounding Schaubergers implosion engine when fully engaged was an ionization
    effect caused by the differential of NTFFA between the inside of the container and the surrounding
    outside, and on one occasion his prototype was creating such high values of NTFFA that the whole
    construct tore lose from his working table and went all the way straight up through the roof of his house.


    Thereafter Victor Schauberger did all his experimentation with the protoype securely bolted to a
    concrete fundament outside his house.

    He never was very interested in the levitation effect, his main objective was to create a reliable
    power generator for domestic use
    .

    Leave a comment:


  • MonsieurM
    replied
    It also useful to repost, interesting info:

    also from the same article: Review of ExtraOrdinary Technology 2011

    Jamie then stated, "Marko's work is in coherence with Pythagorean tuning." He recommends that all device builders look at their work in terms of music, which is embedded in the universal vortex.
    Marko said math is really a visual language, his work is the missing energy in the universe, and then showed a number of calculations on painted glass doors. A so-called "VW" figure with the digits 1 through 9 arranged around it shows a symmetry of numbers that can then be used to calculate various kinds of coil windings. If one tries to include zero as a number in this figure, it collapses. On the other hand, nines permeate the universe. All number sequences run down to 9 ultimately.


    COHERENCE AT ANY LEVEL IS COHERENCE AT ALL LEVELS.
    An orderly arrangement between wave lengths establishes a connection between frequencies and fields. But for this connection to last, it must resonate to all frequencies and fields. This can only be accomplished through the resonate structure of golden mean pathways. This harmonic cascade of inter-connected-ness is the structure of our hologramic universe
    -----------------

    John Milewski

    Much of the work covered in this presentation involves Ormus, which is key to growing gold on glass or air. Some researchers have had indications that Ormes can be in black sand magnetitie. It is some intermediate form of matter that a few people working with alchemy have found over the past 25 years. Ormes is a gas. Metal precipitates out as a metal. At higher temperatures you can get iridium & rhodium to precipitate. Silver dissolves in nitric acid. Anything that crystallizes has Ormus in it. We need to have someone with an understanding of conventional chemistry to look at this Ormus.
    -------------------

    Dale Pond

    Our purpose and goal is to develop usable power by transforming non-observable, non-motion scalar or mind potential into observable, practical kinetic motion. Scalar can best be represented by metaphors, like a kitten under a blanket ready to jump out and do things. Mind Force can be found to affect matter under many circumstances, but it can't be measured or directly observed. There are several different ways to find this, most of which were classified as "spiritual" in previous times.

    Keely put together classifications of levels within the universe, some of which could be observed and some which couldn't. If we can go to the source and engineer from there, we won't have to deal with effects and symptoms. "Motion is an effect of disturbance of equilibrium."
    read the kybalion

    It's important to know the difference between syntropy and entropy. Many scientists today are only aware of entropy. Syntropy involves life processes such as germination, growth, and stellar energy production. It is highly recommended that people study Walter Russell in order to gain a deeper understanding of polarities and how they relate to forces. There is a universal natural heartbeat and we can attach our machinery to this heartbeat.
    ............see also http://www.energeticforum.com/157933-post645.html

    centripetal energy is the basis of life whereas centrifugal energy is the basis of decay and destruction. V. Schauberger
    Dr. Hildy: Far-Infrared, SuperLight and Beyond - YouTube

    Last edited by MonsieurM; 11-21-2011, 01:52 PM.

    Leave a comment:


  • MonsieurM
    replied
    I have a question for you guys:

    I found the following picture here : Practical Guide to Free-Energy Devices - Chapter 5



    I know i mentioned this before, but really what do you think would happen if you replaced the ring with this:



    Richard DAVIS

    Non-Inductive Resistor


    The Problem:

    To develop an electrical resistor that has no residual mutual- or self-inductance at high frequencies.

    The Solution:

    A Moebius strip made of insulated resistive materials with electrical leads attached directly opposite one another provides a noninductive, nonreactive resistor which is simple, inexpensive, and flexible in usage, and can be made to almost any desired size and shape....
    ....Two ribbon conductors of equal length are affixed on opposite ends of a strip of dielectric. The assembly is then given a single twist and the ends are joined to form a Moebius surface. The ends of the conductors are soldered together and the resistor terminals are attached to the directly opposed solder joints. Current applied to the terminals will travel in opposite directions, so that the electromagnetic fields cancel each other, resulting in an essentially noninductive, nonreactive resistor with a low time constant. Bifilar wire may be used instead of resistive ribbon, eliminating the need for a center dielectric strip. Thin film conductors on flat surfaces can also be used to make Moebius resistors.

    Two or more sets of resistive wire may be mounted laterally on the same nonconductive strip, with about 1/16-inch spacing, and connected to form multi-Moebius resistors in one unit. There is no change in the time constant of the individual resistors, nor does one in any way affect the operation of the others, even when they are assembled in parallel or series.

    The performance of the Moebius resistor is unaffected by its form, size, or length. Once it is connected into a Moebius shape, it can be folded or around around a cylindrical core or a card, or even into a ball, resulting in compact packaging of the resistor for use in miniaturized circuits. The Moebius resistor does not couple to metallic objects, external fields, or itself. When the bridge is nulled the resistor can be handled or changed in form without disturbing the balance. The conductors must not be touched and the spacing between them must not be altered.
    I ask because i seem to stumble on it quite often....

    btw: I found a vid posted by sucahyo

    that is interesting to our discussion: sucahyovideo's Channel - YouTube Ice of copper pyramid

    i would really like to know your opinion, you guys are the expert (consider the second example )

    Shinichi Seike: G-Strain Amplifier, Moebius-wound monopolar magnet coils, free energy, over-unity, anti-gravity

    Abstract --- PURPOSE: To provide a quasi-singlepolar magnet the whole of which is almost N-pole or S-pole. CONSTITUTION: A conductive wire is wound by the Mobius winding around a magnetic pole member 1 consisting of rare earth element such as neodium or praseodium. The coil of the Modius winding is energized with a pulse current in order to magnetize the magnetic member 1. Then, the end parts having one magnetic pole (S-pole) of the resultant magnetic member 1 is cut apart from the center part having another pole (N-pole). Only the end parts of the same pole (S-pole) are bonded with an adhesive agent or the like, thereby forming a quasi-singlepolar magnet.
    Last edited by MonsieurM; 11-21-2011, 11:28 AM.

    Leave a comment:


  • MonsieurM
    replied
    this was posted:

    very nice link thanks

    you should check it out



    I posted this image a while back: http://www.energeticforum.com/167223-post1318.html





    from the link: Practical Guide to Free-Energy Devices - Chapter 5



    the flat pancake coil where the magnetic and electric fields are arranged in exactly the way needed for amplifying energy.



    I also found the following



    and this was posted a while back: http://www.energeticforum.com/156850-post546.html

    Leave a comment:


  • MonsieurM
    replied
    From: http://www.energeticforum.com/renewa...tml#post167962

    Originally posted by ren View Post

    @ Duncan,

    I found that video. Watching it again I realized the lines were more dotted so perhaps not what you were referring to. Anyway here it is if you are interested

    MVI 3364 - YouTube

    Regards
    Thanks Ren, here are the pictures





    note: I see helical shaped sort of like the pyramid...maybe you see dotted because at the apex they nullify...

    the Unseen reflects the Seen....

    Leave a comment:


  • MonsieurM
    replied
    Originally posted by MonsieurM View Post
    As i was researching Fulcanelli, i stumbled unto something quite interesting....

    remember:

    Dr. John V. Milewski: Growing Gold from Glass in a Microwave - Part 1 - YouTube

    ORMUS IS A GAS by John V. Milewski

    --------i found the following: The Grail Quest and The Destiny of Man - The Fulcanelli Phenomenon by Laura Knight-Jadczyk

    Tausend gave instructions that they should purchase iron oxide and quartz which were melted together in a crucible. A German merchant and member of this group, named Stremmel, took the crucible to his hotel bedroom for the night so that it could not be tampered with. The next morning, Tausend heated the crucible in his electric furnace in the presence of his patrons, and then added a small quantity of white powder to the molten mass. It was allowed to cool, and then, when it was broken open, a gold nugget weighing 7 grams was inside.
    Nevertheless, while waiting for trial, he was able to perform a transmutation under strict supervision, in the Munich Mint. This was submitted to the court as evidence that no fraud had taken place, but it was contested and did not save him from prison.
    In the same year that Tausend was convicted, a Polish engineer name Dunikovski announced in Paris that he had discovered a new kind of radiation which would transmute quartz into gold. The mineral, spread on copper plates, was melted by an electric discharge at 110,000 volts, and was then irradiated with these new "z-rays." Investors poured two million francs into Dunikovski's project, but, within a few months, when no gold appeared, he was also tried and found guilty of fraud.
    What was discovered was that the quartz being used by Dunikovski (and presumably by Tausend as well) already contained minute quantities of gold. The gold could be extracted by a usual process, producing about 10 parts per million, but Dunikovski's technique produced almost 100 times as much. Nevertheless, he was only dealing with small quantities of gold because his equipment could only handle small quantities of quartz.

    Dunikovski claimed that his process accelerated the natural growth of "embryonic" gold within the quartz. He gave a demonstration before an invited group of scientists which attracted considerable attention. And Anglo-French syndicate formed to bring sand from Africa and treat it in a big new laboratory on the south coast of England, but WWII started at about this time and Dunikovski disappeared. It was rumored that he was "co-opted" by the Germans and manufactured gold for them to bolster their failing economy - but there is no proof.
    Dunikovski claimed that his process accelerated the natural growth of "embryonic" gold within the quartz[.

    from: The Dwellings of the Philosophers Fulcanelli




    "Just as steel pulls the magnet to itself", writes Philalethes (10), "so the magnet turns
    toward the steel. This is what the magnet of the sages does to their steel. This is why,
    having already mentioned that our steel is the matrix of gold, we must equally point out
    that our magnet is the true matrix of the steel of the sages".

    Leave a comment:


  • MonsieurM
    replied
    Thanks Haan


    ------------------

    Pair claim they have turned hydrogen to metal

    (PhysOrg.com) -- Many have tried, but none have succeeded. For at least a hundred years, scientists looking at hydrogen have scratched their chins when musing over the fact that it, as an alkali metal, by all rights should exist as a metal under the right circumstances. But thus far, no one has been able to figure out what the right circumstances might be. Until now. Maybe. Mikhail Eremets and Ivan Troyan of the Max-Planck Institute describe in their paper published in Nature Materials, how they subjected a sample of hydrogen to high pressure and low temperature and found it then demonstrated properties generally ascribed to a metal.

    Leave a comment:


  • MonsieurM
    replied
    a re post:

    Originally posted by MonsieurM View Post
    caduceus air core






    Nothing is at random Fellow Telestai


    wait for it......the white egg

    IMG]

    Leave a comment:


  • MonsieurM
    replied
    Originally posted by MonsieurM View Post
    Here is an interesting fact, in the book The Dwellings of the Philosophers Fulcanelli



    If you search the word Caduceus...there are exactly 30 Entries (harmonic math ) found in the book...

    I will try to post each of them and see what comes out....you could also start yourself and see what comes out



    #1 Caduceus first mention in the text:

    We recognize here, humanized, the hermetic dragons described by Nicolas Flamel, one
    winged --- the hare-lipped monster --- the other wingless --- the gnome with the hairy
    torso. "Contemplate these two dragons carefully", says the Adept (3), "for they are the
    true principles of philosophy which the Sages have not dared to show their own children.
    The wingless one below is the fixed or the male and the one above is the volatile or the
    female, black and obscure (4), which will dominate for several months. The first is called
    sulphur or heat and dryness. And the last is called quicksilver or coldness and humidity.
    They are the sun and the moon, of mercurial source and sulphurous origin which, by
    means of continual fire, beautify themselves with royal ornaments so as to vanquish, once
    they are united, and change any metallic thing --- solid, hard, and strong --- into
    quintessence. They are the serpents and dragons that ancient Egyptians painted as a
    circle, head biting the tail, to express that they came from one and the same thing, which
    alone was enough, and that it perfected itself in its contour and circulation. They are the
    dragons that the ancient poets charged with guarding without sleeping the golden apples
    of the gardens of the Hesperide virgins. They are the same ones on which Jason, during
    his adventure of the Golden Fleece, poured the juice prepared by the beautiful Meda and
    whose discourse so filled the books of the philosophers, that no philosopher ever existed
    who did not write about them, from the true Hermes Trismegistus, Orpheus, Pythagoras,
    Artephius, Morienus and others up to myself. They are the two serpents sent and given by
    Juno who is the metallic nature, which the strong Hercules, that is to say the Sage, must
    strangle in his crib, that is to say vanquish and kill them so as to make them rot, corrupt,
    and engender at the beginning of his Work. They are the two snakes attached around the
    Caduceus and the stick of Mercury with which he wields his great power and transfigures
    himself as he wishes. He, says Haly, who kills one of them will also kill the other
    because one cannot die but with his brother. These two (which Avicenna calls ***** of
    Khorassan and Dog of Armenia), being then united in the vessel of the sepulcher, bite
    each other cruelly and through their great venom and furious rage never leave each other
    from the moment they have grabbed each other. They are the two sperms, masculine and
    feminine, described at the beginning of my Philosophical Rosary which are engendered
    (says Rasis, Avicenna, and Abraham the Jew) in the kidneys, entrails, and from the
    operations of the four elements. They are the humidity of metals, Sulphur, and
    Quicksilver, not the common ones which are sold by merchants and apothecaries, but
    those which give us so many beautiful and dear bodies which we love so much. These
    two sperms, said Democritus, cannot be found on the earth of the living".

    Leave a comment:

Working...
X