Harvesting Energy From the Sun Using Crystals

[MonsieurM]

being as you noticed a visual person, drawing would greatly help me grasp the set up, sorry

[Dave45]

Here's whats happening in the Don Smith device
the A vector in the primary is coupled to the secondary through resonance
The secondary is wound in such a way as to allow both spin directions to flow from the A vector of the primary into the secondary
Please respond if you dont understand what Im saying and I'll try to draw a model
Dave
The wiring direction of the primary is of importance in this setup, in other words you need the A vector field to be moving in the right direction as its related to the secondary-- if you have the right hand spin side of the A vector faceing the left hand wind of the secondary this system will not work.

[MonsieurM]

this got me intrigued, it was posted over at: http://www.energeticforum.com/renewa...d-true-21.html

Could you guys have a look and and let me know what you think


Dave, petar113507 you are the electric connoisseurs in this group

After studying tesla plans, I think something is missing in Don's device(clever man) look carefully at is primary coil tube ,there is a space to put another coil in there!That would match tesla design for is transmitting tower.As for the placement of the diodes,SG and caps I havent figured it out for now.

I think Tesla plans are more appropriate to study Don's device.Tesla is saying that a variable cap should be used in the primary circuit to tune the secondary,
go figure.

[MonsieurM]

Magnetic anisotropy - Wikipedia, the free encyclopedia

Magnetic anisotropy is the direction dependence of a material's magnetic properties. In the absence of an applied magnetic field, a magnetically isotropic material has no preferential direction for its magnetic moment while a magnetically anisotropic material will align its moment with one of the easy axes. An easy axis is an energetically favorable direction of spontaneous magnetization that is determined by the sources of magnetic anisotropy listed below. The two opposite directions along an easy axis are usually equivalent, and the actual direction of magnetization can be either of them (see spontaneous symmetry breaking).

Magnetic anisotropy is a prerequisite for hysteresis in ferromagnets: without it, a ferromagnet is superparamagnetic.

--------


Superparamagnetism is a form of magnetism

[MonsieurM]

what happens when you squeeze a balloon? (principle of mentalism: all is vibe )

What i am trying to convey is imagine the field is a ballon....



you want the 3 to be on top of 6 and 9

[MonsieurM]

(just got back from hardware store with supplies for both) To the construction board!

==Romo

instead of the coils at the bottom of the picture how about adding this to the coil (think Enhydro )

Patrick Kelly's Notes

Pavel Imris was awarded a US patent in the 1970s. The patent is most interesting in that it describes a device which can have an output pwer which is more than nine times greater than the input power. He achieves this with a device that has two pointed electrodes enclosed in a quartz glass envelope which contains xenon gas under pressure (the higher the pressure, the greater the gain of the device) and a dielectric material...
....An optical electrostatic generator which is effective for producing high frequencies in the visible light range of about 10^14 to 10^23 Hz. . . .
...The device can be used in a flourescent lighting circuit, with motors, flash lamps, high speed controls, laser beams, high energy pulses, electrostatic particle precipitation, chemical synthesis (such as ozone generation), and charging means for high voltage generators of the VandeGraph type, as well as particle accelerators

just throwing it out there

ps: posted this way back: http://www.energeticforum.com/148408-post140.html

the Caduceus Coil /Smith coil (see these two posts: [ http://www.energeticforum.com/143721-post92.html )

Quartz Test Tube

and Water

[MonsieurM]

Dave, you should read this

Thomas G. Hieronymous: Eloptic Energy... US Patent # 2,482,773, &c...

The Effect of Magnetism on Eloptic Radiation

A major problem in prospecting for minerals with the Eloptic Energy Analyzer proved to be precise location. Experiment had demonstrated that the energy from buried metal, etc., spreads around it on a very large irregular pattern, varying in shape and size from day to day and even from hour to hour. It had also been observed on a small scale that this energy can be influenced by magnetism. Therefore it was decided to explore the possibility of using magnets in the field to eliminate or concentrate the diffused energy.

For this purpose, several ounces of sterling silver were buried about 30 inches deep in a level, open field. The Analyzer was placed nearby and its input was connected to a long insulated copper wire. On the end of this was fastened a test probe....
...The energy field was now found to have shrunk still farther, and to possess a more simplified outline showing certain definite characteristics

[MonsieurM]

those that have seen the documentary on water will understand...

http://www.energeticforum.com/renewa...tml#post152762 (post#377)

A thought occurred to me, music/sound in your fridge does not sound so crazy after all for food and taste conservation

[MonsieurM]

note:

Alchemist used water distilled three times

so did Dr Vogel:

Water is one of the prime solvents from which life has evolved. It is also the basis of many of the chemical compounds that are on the earth. From measurements made with the Omega 5, we obtain a measurement for water, in the pure state, of 454. The water used was triple distilled.

[MonsieurM]

Yes, I have little doubt she has reached overunity but its a very complicated system that deals with high frequency high voltage, but I believe there is an easier way and am determined to find it.
We need something everyone can build in their kitchen with parts that are easily accessible.
Now we understand how it works we just need to make it work for us.
Dave

so we know that copper and iron are two of our main building element

with water....this one is special, we need to test the various type of water:

we have distilled (maybe several times ) , alkaline , acidic, magnetized (vortex trap )

you can also mash up things....for instance vortex trap used on distilled water etc...

and finally you have coil design to produce the frozen vortex



and i am of your opinion Dave, the true beauty of nature is in its simplicity while still being complicated (women...can't live without them..... )

keep it simple....a magnet is already a producer the E Field all you have to do is push it....

see also this post Dave, you'll understand http://www.energeticforum.com/157367-post603.html

what happens when you squeeze a balloon? (principle of mentalism: all is vibe )

[MonsieurM]

I did not read those posts carefully enough the first time through. I'll try to smash a few with a hammer to see a difference in effect. Got a bag of 20 quartz crystals for about 10 bucks.

waitwait

Doesn't the nanoscale (or the smaller the scale, the higher intensity of effects seen per-area-unit??)



Will go back to the mineral shop, see if they have a grinder to get fine powder to compare.

Also, they have enhydro quartz at the shop as well. They were kinda small, and had a few for 15-20 dollars... I have been pondering different uses for them....

==Romo

the advantage, powdered quartz is like zno under ultrasound....Powerme

Huifang XU, et al -- Zn Oxide photoelectrolysis

now i'm wondering what would you get if you put an ice core layered as you read in the post under ultrasound (not high enough to break it, but high enough to produce vibrations... ....interesting

[Dave45]

you mean Yin overlapping Yang, she caught my attention with the word resonance

Yes, I have little doubt she has reached overunity but its a very complicated system that deals with high frequency high voltage, but I believe there is an easier way and am determined to find it.
We need something everyone can build in their kitchen with parts that are easily accessible.
Now we understand how it works we just need to make it work for us.
Dave

[MonsieurM]

I have been keeping up with the Don Smith thread and something I find very interesting is ZZZ is using welding rods that are iron coated with copper, this is what sparked my interest in the thread to start.
Dave

you mean Yin overlapping Yang, she caught my attention with the word resonance

[Dave45]

I have been keeping up with the Don Smith thread and something I find very interesting is ZZZ is using welding rods that are iron coated with copper, this is what sparked my interest in the thread to start.
Dave

[Dave45]

You guys have come up with some good idea's and I encourage everyone to follow their instincts.

I have been thinking we need to separate the fields before they combine, what if we froze a single wound transformer, iron and all without current in the coil, this would allow the iron to circulate the magnetic field but the A vector would not be able to reach it, then the A vector could be collected externally before it couples with the magnetic field.
Could you imagine the size of the A vector if it senses the magnetic field but could not reach it.
Also I believe the magnetic field is cold, The A vector is hot or at least produces heat as it moves through a conductor. Well we know it produces heat as it moves through a conductor look at our sun.
Dave