gravity waves found

[Jetijs]

Ok David!
Thanks.
Can't wait for your next video!

[david lambright]

jet!

i will try and upload a photo of this for you today, if i cant, i will do it ASAP on my friends computer........BEER!........cheers....david

[david lambright]

finally!

OK then...so are you ready to see the video of how Ed "transferred" this energy to his quarry?

[Jetijs]

David, a drawing would be helpful, I don't get how do you mean the coil inside the core. I have all types of resin available and I have also Iron oxide and powders and can do this test tomorrow, I just need a drawing

[david lambright]

ferrite core+copper coil

here it is....you will need iron oxide powder,and some epoxy[see bruce tpu video about ferrite cores]now use a coil of copper, and pour your oxide/epoxy into a U shaped mold, with the coil inside the ferrite!......any questions?.........david

[mrbreau]

Daves setup modified

I added an enhancement to the setup. You can see it here; EnergeticTube.com*-* Where technology goes LIVE!

There is a description of the mod at the energetictube site.

The chain hanging in the wheel is to show that there is a force coming from the center, the axle, but the wind screwed up the effect. I could feel the push when I tried to hold the chain to the center. It seems that aluminum has a better resistance to the magnetism and effects the aluminum harder. Any large metal object applied to the axle area meets resistance. But once the resistance is overcome then there is no more resistance.

With the chain in place I'll try to SEE if I can generate magnetic current.

Warren
..

[mrbreau]

Testing, testing

@Harvey

"What type of reactions do you get with the compasses stationary off to the side while the device rotates? What if the Marine Compass were placed with its axis directly over the rig axis? Those would be interesting tests as well"

I actually did those tests and failed to mention them, though the one is definitely worth mentioning. While the device was spinning I tried to place the marine compass over the center axis, the axle. On the way I encountered a very subtle resistance, much like bringing two like faces of magnets together but really light. I had to try it several times to verify that I was not actually touching the wheel. The compass was actually an inch above the axle! The end result is that the aluminum container for the marine compass is now magnetic so I can't place another compass near it expecting a true reading of the new compass though the marine compass itself is still right on.

Placing the new compasses (I bought two new ones yesterday afternoon) on the corners of the stand just below the wheel as the wheel was turning, they both were horizontal to the wheel face, tangently, and pulsing slightly. As the wheel slowed the pulses got stronger and stronger and eventually would spin the compass needle.

From these two actions I realized that the axle was actually magnetized somehow. That is what gave me the idea that a magnetic gate had been created somehow. More and more of Leedskalnin's work is making sense as I do more experiments.

I'll have more to report later on. Thanks for your interest.
Warren
..

[Aromaz]

[Harvey]

Looking for photographic distortions and contraction and this popped up

http://www.guspepper.net/electro/Segundo%20semestre/Seminarios/Funez.pdf

And this little video makes one think a bit too:
Relativistic Aberration

[Harvey]

has any one tried putting acoil inside the ferrite yet??.....in the video, ferrite + steel PMH you see me lock it with 3turns of wire...try putting a copper coil INSIDE the ferrite core.....lock it again and check wire end to end and end to ferrite...i did this using a stranded wire transformer coil inside a crude oxide U.i used the same steel top as in the video on this device. i got a steady output for hours with this setup, although small.....if you find elect. do not be blinded and look for what created it,elect.being the by- product........david

I'm not sure I understand what you are saying here

Did you put a stranded wire transformer coil inside a hollow ferrite core?

I'll have to go back and look at the core you used in that video.

But you say it gave a steady 'output' - can you be more specific? Was it electricity? DC or AC mV? mA? Did the coil have a core of its own, or just air?

Edit to Add: Ok, I just looked at the ferrite core locking video and I see that it was solid. So when you say inside do you mean like a bobbin coil just sitting in the inner area that the core and cap enclose? If so, how did you have it oriented - IOW, if the coil was air core, were the wires and the ferrite concentric or orthogonal to each other? How many turns and what dimensions (diameter, thickness of winding layers, and length) for the coil?

[david lambright]

terminology

does any one notice that WE are "coining" the terminology that will be used to describe this energy?......david

[david lambright]

blinded by electricity?

has any one tried putting acoil inside the ferrite yet??.....in the video, ferrite + steel PMH you see me lock it with 3turns of wire...try putting a copper coil INSIDE the ferrite core.....lock it again and check wire end to end and end to ferrite...i did this using a stranded wire transformer coil inside a crude oxide U.i used the same steel top as in the video on this device. i got a steady output for hours with this setup, although small.....if you find elect. do not be blinded and look for what created it,elect.being the by- product........david

[Harvey]

YouTube - potatoheadist's Channel

Hi David,

In the above video - there must be some displacement of oil as the large particles fall and settle down. I think this is what we are seeing as a type of gravitational convection - the thicker heavier fluid (and particles) drops down the middle and the thinner lighter fluid (and particles) moves up the sides to fill the void - so we get a vortex there as the particles also get pushed together in the middle creating heavier groups that cannot be suspended as well in the fluid.

I love the experiment - just wish it was longer though

Cheers,

[david lambright]

i dont like electricity!

LOL. I guess u made that coil. How bad was the shock?

....being a plumber i have been jolted a few times...110vac is not so bad....220vac....HURTS!!...i prefer Eds "magnetic current".... to me it feels like electric shock without the jolting zap that comes with it, if that makes any sense?.....tom bearden uses good terminology to describe it...even if he didnt do what..... ..i do like the fact that i have energized my rig once over a week ago and not had to do it again......E, bad....MC, good......meaning only that elect. is by-product of mag. current generation....david

[Vickers]

please be careful...Disclaimer and Limits of Liability

The demonstrations and procedures described within this thread are derived from the research and personal experiences of the author. The author is not responsible for any negative or adverse effects or consequences from the use of anything suggested, demonstrated, or discussed on this thread.....david

LOL. I guess u made that coil. How bad was the shock?