Donald Smith Devices too good to be true

[xee2]

@ joefr

What is the 360 turn coil diameter?

[Peculian]

nice proceeding here

Hi all.
Nice to see that the topic has geared around its scope.

@Boguslaw
Yep it is what I was looking for, the info you wanted to share with us all.
Thanks about that.

Thanks goes to Gedfire and Stoker_x1 too.
Now it becomes cleaner and cleaner, I mean the idea:
Don speaks about resonance and how much important it is, and suggests to us to arm ourselves
with a good RLC meter.

Tariel Kapanadze, also speaks about resonance and the importance of it.

Ghazanfar_Ali also speaks about getting and maintain resonance.

Nice work from all contributors.Many Thanks from me.
Best Regards.

[OrionLightShip]

Now it becomes cleaner and cleaner, I mean the idea:
Don speaks about resonance and how much important it is, and suggests to us to arm ourselves
with a good RLC meter.

Tariel Kapanadze, also speaks about resonance and the importance of it.

Ghazanfar_Ali also speaks about getting and maintain resonance.

Nice work from all contributors.Many Thanks from me.
Best Regards.

I don't know if it is true but towards the end of the Moray book 5th edition there is a mathematical derivation and statements to the effect that for OU effects to be found in resonance that R(squared)C must be less than 4L. Otherwise you end up with power robbing damped oscillations.

R(squared) - that would explain why an excellent low resistance ground is essential.

Also, a good old fashioned grid dip meter is an inexpensive, simple, and fairly precise real time method of detecting resonance when tuning in coils.

yes, no, maybe so?

Orion

[Dave45]

Stoker your right my post was uncalled for, I usually dont poke my nose out like that, dont know what got into me.
I apologize and
I hope your device improves more everyday
share it with those around you
best wishes
dave

[dragon]

I don't know if it is true but towards the end of the Moray book 5th edition there is a mathematical derivation and statements to the effect that for OU effects to be found in resonance that R(squared)C must be less than 4L. Otherwise you end up with power robbing damped oscillations.

R(squared) - that would explain why an excellent low resistance ground is essential.

Also, a good old fashioned grid dip meter is an inexpensive, simple, and fairly precise real time method of detecting resonance when tuning in coils.

yes, no, maybe so?

Orion

The Daniel Cook patent also depicts a low resistance very high inductance coil and would confirm the R< sqrt(4L/C) theory - this was 15 years before tesla. Also shows the use of a 3 plate capacitor and later moray used a similar technique in his tubes.

[OrionLightShip]

Also, a good old fashioned grid dip meter is an inexpensive, simple, and fairly precise real time method of detecting resonance when tuning in coils.
Orion

Correction - A grid dip meter is not the right tool for the frequencies in use. A good RLC meter is definately needed. I remember now that in my long gone ham days I was tuning for a plate current dip. My apologies.

Orion

[David Fine]

Yep

Yes, I do agree with that also!!

I have a weird feeling Stoker is speaking the truth.

[joefr]

Diameter

@ joefr

What is the 360 turn coil diameter?

110mm

Primary L1 and L3 Feedback coil is 160mm in diameter

This is in my setup you just have to watch that feedback coil winding is not to close to secondary coil winding because a spark can jump.
This setup should work with any diameter of secondary coil you will just need to adjust position of L1 Primary coil and the turns of L3 feedback coil for best output.

JoeFR

[ewizard]

Well there you (we) have it. stoker_x1 says he has a working Don Smith device. And he says it's all about resonance. The same thing I posted again here recently - saying Don was always pushing R-E-S-O-N-A-N-C-E. And he confirms that the 'Secret' Ghazanfar Ali gave us is correct. stoker_x1's statement regarding that might have been a little confusing unless you realize he was quoting Farmhand who was quoting bbem who was quoting Ghanzafar Ali. Yep it got a bit convoluted but this is precisely what he was saying - that Ghanzara Ali is correct. And again I'm going to choose to believe stoker_x1 is being honest here. So to me his info is a big boost. The only problem is it sounds like I'm going to have to actually engage my BRAIN. Actually think Well I knew there had to be a catch.

[harishsingh]

Frequency Matching High Voltage Radiant Charger

Well there you (we) have it. stoker_x1 says he has a working Don Smith device. And he says it's all about resonance. The same thing I posted again here recently - saying Don was always pushing R-E-S-O-N-A-N-C-E. And he confirms that the 'Secret' Ghazanfar Ali gave us is correct. stoker_x1's statement regarding that might have been a little confusing unless you realize he was quoting Farmhand who was quoting bbem who was quoting Ghanzafar Ali. Yep it got a bit convoluted but this is precisely what he was saying - that Ghanzara Ali is correct. And again I'm going to choose to believe stoker_x1 is being honest here. So to me his info is a big boost. The only problem is it sounds like I'm going to have to actually engage my BRAIN. Actually think Well I knew there had to be a catch.

Could it be, we could use the Frequency Matching High Voltage Radiant Charger: edit (v2.0)HHO Pulse Charger V2.0 - Heavy Duty Radiant Charger - Youtube

(v1.0) High Voltage Electrolysis - YouTube

to power the first transformer - trlf1 ?
From there it's a matter of converting radiant energy to conventional current.

It includes instructions on how to build an impedence matching circuit that will automatically tune to resonance if used for making hydrogen or charging a battery. The circuit finds the absolute perfect frequency, and adjusts continuously depending upon the condition of the water or battery that you are charging. It is one of the only HHO pulse circuits that automatically finds the resonant frequency of a given WFC (water fuel cell).

RITALIE.COM - A place for enlightened souls



It's being discussed in the BSSO thread.

- HS

[David Fine]

good guy

Hi Dave45,

You are a good fellow!! You are frustrated like the rest of us; read and studied a lot; to much information to keep up with and a lot of it is purposely tainted; and someone tells you they found the golden grail. It's normal to be a little testy when you are passionate like we are about getting your hands on a working DS device and someone says they have it but won't share the details. They just tell you to read some more. Most of us are read out but we will read and study till we do have this device ourselves.

Thanks Stoker for sharing that you do have a device and that the details are available in Don's written information!! It helps to keep us motivated and working.

Best Regards,
David Fine

Stoker your right my post was uncalled for, I usually dont poke my nose out like that, dont know what got into me.
I apologize and
I hope your device improves more everyday
share it with those around you
best wishes
dave

[stoker_x1]

[David Fine]

Thanks For Sharing Your Success!!

Hi Stoker,

Thanks for sharing about your success!! It gave us a shot in the arm at a time we really needed one.

Best Regards,
David Fine

[joefr]

great info

Hi Stoker_x1

Thanks for great info. Can you please post a schematic of your working device.
I like to know the position of the spark gap and what you use for spark gap ( ordinary spark gap or GDT gass discharge tube - surge arrestors )

JoeFR

[MonsieurM]

sounds like you are describing a musical instrument

thank you again for all the info you provided .......much appreciated