Donald Smith Devices too good to be true

[ilandtan]

don't get caught up too much with all those faster than light stuff or waves etc.. based from experience.. it is good to know them but practical use.. I haven't found any good use to it..

the faster than light wave thingy is actually what happens inside a capacitor.. If you would want Tesla style.. connect the bottom wire of the secondary of two tesla coil... or connect them to a common ground..

ricards,

I get that, I mean with the common ground for one wire transmission, using capacitive coupling between transmitter and receiver. I have never really done it, but I have inbound coils, and I am going to do a one than two receiver test if all goes well.

What I think you might not see is that I am not just idly chattering; I have a working theory. With proof.

Prior to doing this, I had nothing besides making a working Ed Gray motor.... and I maybe considered Don Smith was somewhat a crazy coot, now I am clinging to his every word because he seemed to know specifically how this undocumented physics worked.

You have to decouple electrical and magnetic with resonance, that I'm sure.

I have made many more advances but this illustrates that the theory is sound.

[med.3012]

don't get caught up too much with all those faster than light stuff or waves etc.. based from experience.. it is good to know them but practical use.. I haven't found any good use to it..
.

Hello !


The early work of Mr Tesla with radiant energy show the possibility to charge a body or discharge the body using radiant electricity which is faster than light , the work of prof K. Meyl also show this behavior plus over unity involved ,

the correct way to harvest ambient energy is to send while you are receiving, DS used another term which is disturbing ambient ... Tesla style can take another unknown shape !










regards

[ricards]

Ricards and Dwane,

From my experiments, If you take a ferrite core and place it in a slayer, you can harvest two different types of energy. I would say it is important such that you can see electrical and magnetic and actually harvest them at the same time, or independently. If you wind multiple pairs of coils.

1. HF-HV AC - If you take one wire from a winding and put a low wattage incandescent bulb in series to Earth ground it will illuminate. If you place a diode in series the bulb does not light to ground
2. Pulsing DC - If you take and put a 60 watt LED to the two leads of a winding it will pulse. If you add earth ground anywhere, it wont influence the response (however if you create a counterpoise with the battery, and Earth ground, this configuration may affect the pulse cycles as the proximity of the ferrite core to the slayer... you can actually place it on the top and create output

I know that Magnetic resonance is not understood, nor is it written about in power context. The Tricity patent gives a little bit of explanation, you might look that up. All you will find in google are the quantum energies relating to imaging, because they use huge coils in an MRI to excite magnetic responses to cells that they can detect, then plot them in 3D.

I believe for the most part, that magnetic travels along side of electrical resonance. What that means for us is if we create an electrical resonance in coils, it should be close to magnetic resonance (I read somewhere Tesla thought they had to be slightly faster than C ). However, their parallel nature for the most part is useful for designs because our coils are small. From what I can understand you can measure the hertzian with a scope, but you are not measuring the teslian wave which are scaler. D.S said you detect the scaler waves in the RF. This is supported by experiments where using Tesla Coil transmitters can penetrate a Faraday Cage and therefore not hertzian.

don't get caught up too much with all those faster than light stuff or waves etc.. based from experience.. it is good to know them but practical use.. I haven't found any good use to it..

the faster than light wave thingy is actually what happens inside a capacitor.. If you would want Tesla style.. connect the bottom wire of the secondary of two tesla coil... or connect them to a common ground..

try to see it this way.. 2 inductors are in series and connected parallel to a single capacitor where 1 Plate is the topload of Teslacoil 1 and the other is the Topload of Teslacoil 2.. this is a.k.a in eric dollard/steinmetz/Faraday as Di-electric lines of force...

and I don't know where you read that parallel nature.. but Magnetic and Electric relationship are right angles to each other (perpendicular), If you have and Electric current running through a wire the magnetic lines of force would encircle that wire. likewise if magnetic lines of force cuts through ...Conductor-Insulator-Conductor arrangement.. the electric current would be right angle to that... but this is something we can manipulate.

the Information Don Smith provided are good but based on my own research and experimentation not all are true.

[med.3012]

I would like to add to Med's insight, by saying electrical and magnetic components have equivalence, in presence but not in terms of quanta, just saying they appear together in the electrical context (but not in equal portions). Obviously if there was a hard relationship that wasn't breakable, we need to pack up and close down this thread.

My theory that I'm trying to prove now, is that you break that relationship by decoupling that relationship. That is done by resonance, and resonance means radiation of the scaler (Magnetic) component.

i agree with you we need to decouple the relationship between magnetism and electricity. but they appear to couple back again very fast ... here we lost the ability to harvest high power but it appear DS had a solution !!

[ilandtan]

HI !


there's some smart observation behind DS effect :


there's no electric component without an equivalent magnetic component, this is why there's an electromagnetic waves .. you disturb the electric and it invite an equivalent magnetic ( current ) for free !!!

I would like to add to Med's insight, by saying electrical and magnetic components have equivalence, in presence but not in terms of quanta, just saying they appear together in the electrical context (but not in equal portions). Obviously if there was a hard relationship that wasn't breakable, we need to pack up and close down this thread.

My theory that I'm trying to prove now, is that you break that relationship by decoupling that relationship. That is done by resonance, and resonance means radiation of the scaler (Magnetic) component.

[ilandtan]

Or you could ground the one end of a coil, wrap around a ferrite core the other end to an antenna / topload, make a secondary from that core (less turns), get it close to the slayer exciter.. I did try an experiment like that I remember, but inefficient though my slayer exciter consumes 2 amps at 12v.. and barely lighting a bulb from it.. maybe Its my crappy transformer or the crappy exciter, or both that made it inefficient... but I haven't tried having multiple receivers.. I guess thats a thing to do for me.

Ricards and Dwane,

From my experiments, If you take a ferrite core and place it in a slayer, you can harvest two different types of energy. I would say it is important such that you can see electrical and magnetic and actually harvest them at the same time, or independently. If you wind multiple pairs of coils.

1. HF-HV AC - If you take one wire from a winding and put a low wattage incandescent bulb in series to Earth ground it will illuminate. If you place a diode in series the bulb does not light to ground
2. Pulsing DC - If you take and put a 60 watt LED to the two leads of a winding it will pulse. If you add earth ground anywhere, it wont influence the response (however if you create a counterpoise with the battery, and Earth ground, this configuration may affect the pulse cycles as the proximity of the ferrite core to the slayer... you can actually place it on the top and create output

I know that Magnetic resonance is not understood, nor is it written about in power context. The Tricity patent gives a little bit of explanation, you might look that up. All you will find in google are the quantum energies relating to imaging, because they use huge coils in an MRI to excite magnetic responses to cells that they can detect, then plot them in 3D.

I believe for the most part, that magnetic travels along side of electrical resonance. What that means for us is if we create an electrical resonance in coils, it should be close to magnetic resonance (I read somewhere Tesla thought they had to be slightly faster than C ). However, their parallel nature for the most part is useful for designs because our coils are small. From what I can understand you can measure the hertzian with a scope, but you are not measuring the teslian wave which are scaler. D.S said you detect the scaler waves in the RF. This is supported by experiments where using Tesla Coil transmitters can penetrate a Faraday Cage and therefore not hertzian.

[med.3012]

Hi Guys,
It is easy to see how one can become slightly disoriented with the Don Smith use of the electrical system to explain his methodology.

I have been going over his observations and there are two stand out observations that I feel applies to the present discussion. 1) magnetic resonance; 2)Magnetic impulses produce electric field and Electric impulses produce magnetic fields. These concepts are applied to high frequency high voltage pulses, such that a continuous stream of orderly energy can be drawn continuously from any one of his resonant systems.

Sound too easy. For one, I am not sure that I understand the working concept of "magnetic resonance". Unless it is the single application of current to an inductor. From, I would assume a non electric source, of which I can only think of two sources. One being eddy currents, requiring a non air core and two, something such as Klopsteg's thermo-magnetic effect - massive current though a large inductor using heat. Impractical for the purposes here. If it is eddy currents, then DS talking high frequency air cores is throwing us off the scent! (Or leaving an out of left field clue!)

I leave it there. I am still reviewing The Don. I am also wondering if the Heaviside component is incorporated here somehow as well as coil shorting! I am also aware that there is much more technical expertise here than myself who has to read and reread information several times before it gets even close to scratching the surface.

Regards

Dwane

HI !


there's some smart observation behind DS effect :


there's no electric component without an equivalent magnetic component, this is why there's an electromagnetic waves .. you disturb the electric and it invite an equivalent magnetic ( current ) for free !!!


the magnetic resonance waves is faster , faster than light , this mean he worked with radiant energy , radiant energy is the cause for earth to grow , these particles make the inner heart of earth to keep warm .. to harness this power we need radiant energy, it's easy to feel your hand getting warm when you touch a plasma globe , the plasma shake the molecules of your hand so you feel the warm ..
now to take the power from the earth or the air we need to shake it with radiant electricity..at this point as the electrons exist in doublet it's easy to separate them so you have volts X amps = power !



the symmetry is needed to divide each group according the charge they have , positive this way , negative the other way ... right angle component produce such phenomena since we have Lorentz force.


at this point the most amazing electrical instrument is the capacitor as Tesla stated !


regards

[Dwane]

D S Observation

Hi Guys,
It is easy to see how one can become slightly disoriented with the Don Smith use of the electrical system to explain his methodology.

I have been going over his observations and there are two stand out observations that I feel applies to the present discussion. 1) magnetic resonance; 2)Magnetic impulses produce electric field and Electric impulses produce magnetic fields. These concepts are applied to high frequency high voltage pulses, such that a continuous stream of orderly energy can be drawn continuously from any one of his resonant systems.

Sound too easy. For one, I am not sure that I understand the working concept of "magnetic resonance". Unless it is the single application of current to an inductor. From, I would assume a non electric source, of which I can only think of two sources. One being eddy currents, requiring a non air core and two, something such as Klopsteg's thermo-magnetic effect - massive current though a large inductor using heat. Impractical for the purposes here. If it is eddy currents, then DS talking high frequency air cores is throwing us off the scent! (Or leaving an out of left field clue!)

I leave it there. I am still reviewing The Don. I am also wondering if the Heaviside component is incorporated here somehow as well as coil shorting! I am also aware that there is much more technical expertise here than myself who has to read and reread information several times before it gets even close to scratching the surface.

Regards

Dwane

[ricards]

Ricards, I am trying to understand your statement "the cap is maintaining it's charge because of the Inductive discharge". Can you please explain that in detail. I can't pretend to understand. And I really want to understand. A resonant exciter will definitely do a better job at at producing output with minimal loses from energy used in the input.

I think what you're saying is that you simply are using less of the bucket of stored charge in the capacitor; as long as you can replenish the cap again you have a viable power source that is the cap.

How I harnessed this magnetic portion is simple. I took a slayer coil, which is self resonant(so no worries about coil length and ratios..i.e., math) And stuck a ferrite core, which acts like a concentrator of... MAGNETIC, not electrical. Wrap a harvesting coil, and boom you can harness that power. It maybe close to over-unity, but I wont make claims for it.

Or you could ground the one end of a coil, wrap around a ferrite core the other end to an antenna / topload, make a secondary from that core (less turns), get it close to the slayer exciter.. I did try an experiment like that I remember, but inefficient though my slayer exciter consumes 2 amps at 12v.. and barely lighting a bulb from it.. maybe Its my crappy transformer or the crappy exciter, or both that made it inefficient... but I haven't tried having multiple receivers.. I guess thats a thing to do for me.

"The cap is maintaining it's charge..." think of the sequence of a resonant circuit that dies slowly...

...
Cap Discharging = Coil Has Magnetic Field
Coil Has Magnetic Field no more current, It will collapse..
Magnetic field Collapse (Inductive Discharge) = Cap Charges (other side)
Inductive Discharge Charging the Other Side of the cap..
Then..
Cap Discharges (opposite direction) = Coil Has magnetic field (opposite polarity)
Coil has magnetic field no more current, It will collapse..
Magnetic Field Collapse (Inductive Discharge) = Cap Charges..
now If you charge the cap again at the same side in this part of the cycle..
where the Initial Energy you put it has not died yet,.. your power source will spend less energy to charge the cap at the same voltage..

but you know what, sometimes I wonder why there is a inductive discharge when the current is stopped at 0 current part of the cycle... maybe the magnetic field build-up and collapse is slower than the electric discharges... baah much speculations..

anyway.. the Coil Length is Important to demonstrate Longitudinal waves along the length of the wire.. I've manage to do this with 12v as it is easy to pulse 12v at khz or mhz unlike a high voltage where power source is the problem.. and controlled frequency of kilovolt range is hard...
I could stack batteries to achieve high voltage or a ZVS rectified to charge a cap, but mosfets/transistor at kilovolt range is rare (and expensive).
I will try to do with just like 350v or so.. the highest voltage rating of mosfet I could source is 700v..

regarding coil geometry.. though I haven't had any experimentation with it..
but I think it is important..
Google.. "Strongest Electromagnet in the World"..
it is achieved by altering coil geometry..

let me just add..
"Eliminate the notion of 'Charge' in your head"
or rather
".. 'Charge' is a state of matter.. not a thing (matter)"
In my experience it is much easier to understand electricity this way.

https://www.youtube.com/watch?v=eQGd_jYYfqQ
an interesting experiment by russ.

[Dwane]

[VIDEO]https://www.youtube.com/watch?v=GZXptSTUoZE[/VIDEO]

[QUOTE]

Hi ilandtan,

I have tried to assess, with my non xray vision, what might be at the centre of the coil I posted of DS, I suspect HV diodes. This unit also acts as a receiver, as Don demonstrated when he "shocked" himself.

The issue of resonance in DS's devices, is to my mind, an efficiency process. I have calculated, looking at the antenna on this device that it must be running over 500Mhz: although I do not know the impact of the Metglass core on the frequency attenuation. However, my xray vision is unable to exactly determine the antenna length for a really accurate calculation!!

The outcome of the resonance in a DS device, to my opinion, is exactly similar to that of your Hairpin example. The fact that DS has such a high operating frequency enables a greater volume of energy capture. At his frequencies and voltage level just a couple of milliamps per cycle will produce an enormous power output.

I stand to be corrected. Thanks for showing us your video demonstration.

Regards

Dwane

[med.3012]

I believe we do have to listen, and be honest. If you saw me going down a road that appeared to you that it was a dead end, would you tell me? I would want you to tell me if I was wasting time, since neither of us I assume are immortal.

Regardless of the geometry, I can replicate your results without the ETBC, with a different exciter configuration. My whole point is that the exciter is trivial. With 400+ pages of forum on this thread alone supporting me.

I believe it's a collective work and collective success or failure .. i am doing my best to show my point of view , practical investigation will tell .. 400+ pages can be compacted in a simple drawing if we find the correct solution ..

we have at least 6 related device to the ETBC all work in different ways ..

ETBC ( closed CD ), ETBC ( opened CD ), S-ETBC, M-ETBC , ETM , D-ETBC ..

the D-ETBC show the complexity of such geometry but with the help of Tesla we could find a solution !

regards

[ilandtan]

Hi Ilandtan,

Isn't that highlighted in the link you have provided?.. I have been giving this a thought and try to look things at a different angle.. avoid the math and just focus on the logic.. I remember that I have read that website before.. but re-reading it again made a lot of sense.

the cap is maintaining it's charge because of the Inductive discharge.

since you are feeding one side of it at the same moment of the inductive discharge charging the same side, you are getting an increase in voltage.. this what we call resonance.. its not really producing energy it's just that the initial energy you put there before is not totally gone yet... so its stacking..

I agree with you that very few explored the magnetic aspect.. I haven't realized that until you pointed it out.

Ricards, I am trying to understand your statement "the cap is maintaining it's charge because of the Inductive discharge". Can you please explain that in detail. I can't pretend to understand. And I really want to understand. A resonant exciter will definitely do a better job at at producing output with minimal loses from energy used in the input.

I think what you're saying is that you simply are using less of the bucket of stored charge in the capacitor; as long as you can replenish the cap again you have a viable power source that is the cap.

How I harnessed this magnetic portion is simple. I took a slayer coil, which is self resonant(so no worries about coil length and ratios..i.e., math) And stuck a ferrite core, which acts like a concentrator of... MAGNETIC, not electrical. Wrap a harvesting coil, and boom you can harness that power. It maybe close to over-unity, but I wont make claims for it.

[ilandtan]

Hello !


no problem at all , i think we have to listen to each other ...the exciter is important but the key remain in the geometry itself , this is why i am still working around the ETBC as a special coil capacitor

I believe we do have to listen, and be honest. If you saw me going down a road that appeared to you that it was a dead end, would you tell me? I would want you to tell me if I was wasting time, since neither of us I assume are immortal.

Regardless of the geometry, I can replicate your results without the ETBC, with a different exciter configuration. My whole point is that the exciter is trivial. With 400+ pages of forum on this thread alone supporting me.

[med.3012]

Try to use different bulb Med, it will make you happier then pulsing the discharge. Single filament LED will stay lit with DC only.

Please understand I am not trying to slight you, and have the utmost respect for your work.

My point is that it is still the exciter you are focused on. I don't believe it makes sense that there is some configuration that will work so well it will power a house.

What I see in several examples is D.S went straight from his NST to his HV diode bridge, so this effort is the wrong direction from my point of view.

The cap has to be filled, and then discharged... or does it? Well that is the strange landscape that the AEG starts to tread. From the summaries, the cap is seen as the power source, but it maintains it's charge because you are only feeding one side. This is what we don't understand, how a capacitor can maintain it's charge but also produce energy.

Hello !


no problem at all , i think we have to listen to each other ...the exciter is important but the key remain in the geometry itself , this is why i am still working around the ETBC as a special coil capacitor , the latest model describe it as a compacted Tesla wireless transmitter / receiver is the most important model until now , :


the following transformation allow the ETBC to work as transmitter and receiver both at the same time :




because we are able to send / receive it's easy to take power without disturbing the oscillation mechanism , in other words you can replicate power with radio frequency speed , you disturb the ambient and you take copy of the available power while the electrons change the spin direction ...

the problem is we still see only one direction : the cap is seen as the power source, but it maintains it's charge because you are only feeding one side

the ETBC offer both directions ... this is explained in my thread ..

another important thread related to this is evostars thread :http://www.energeticforum.com/renewa...e-coil-11.html


the ETBC is an extension of the famous Tesla bifilar pancake coil , in one side it produce a deflected magnetic field ( right angle component ..) , it has a capacitive geometry , it's an open coil , the electron spin ... , much higher frequency ( Dielectric waves may involve casimir effect ) , lorentz force is there .

we want something that work in practice but we have to see all the possibility , failure after failure may lead to great success ..

[ilandtan]

Hi ilandtan, here is the classic item where it appears the NST directly drives the device.

Regards

Dwane

But in your example Dwane, he is again going through a coil structure .... then it's the old wrestling with achieving resonance. Focus will be the struggle with that.

My point of view is to understand the transformation... not get stuck in that resonance rabbit hole. If resonance was the key, it doesn't seem apparent in some of his work.

Look At these Devices:





NST > Diodes > Capacitor

These devices show no resonant coil exciter, its just NST to diodes. The fist image is again incomplete. The second image is important because it shows the second module...output coil, and how to get there.

I have proven you don't need resonance coils to run REAL wattage loads

[VIDEO]https://www.youtube.com/watch?v=GZXptSTUoZE[/VIDEO]