Multifilar Generator Coil - Lenz delay Experiments

[alexelectric]

Turion, Friend your work is very valuable, and if you are valued by many, and have experience and knowledge,
you continue with your experiments and demonstrations, your comments and presentations, I learn a lot from you.
of the comments other users, goes of all kinds, and you must be prepared to take things slowly, do not let discourage invade, why you lose, and what I have seen and read of many of your prototypes are a sample of your talent and knowledge, some people will not value it, and others will,
in this forum there is everyone, those who want to learn, those who build and share, those who doubt the projects (it is valid if they provide their arguments well founded), the debate and constructive criticism helps to be closer to the truth .

my respects and admiration for you
. I saw how he defends his ideas and proposals, in the other sections of the forum you have contributed many projects, my admiration,
go ahead, with the generator and continue sharing it, I am interested in building a small replica, it is very interesting
Do not be discouraged, adversity makes you great
see you soon

[BroMikey]

I finally got under your skin? I deserve whatever I get. Anyway you
are the chief cook and bottle washer who has led the way and is the
final authority. The point is someone with a 3D printer and the right
magnets could eliminate the cogging completely. I am not even close
to eliminating the cogging (OR DRAG YOUR WORD SWITCH) and as
you have just now confessed have not eliminated ALL of the drag either.

Mad Mack taught that by moving a magnet rotor past forks you could
take measurements in LBS to learn with. Shielding around magnets
helps to give the operator some adjusting room as shields can be slid
back and forth changing the fields in many ways. One way is to limit
the peripheral field.


Anyway Mad mack was right, it is the little things that change the game.



You gave yourself and will always continue to do that, it is part of
your teacher gift. Remember the students who always went out of their
way to get under your skin?


The drag can be further reduced, the bench shows this, my bench work
has value, I trust what i see on the bench..

[SkyWatcher]

Hi all, been doing the mothers day thing today.

Though I did get some time put in working on a design for vertical rotor.

The only tricky part, is that I need to get parts to make a coupler for the 5/16" motor shaft, because I don't think an arbor on the motor shaft, with rotor secured at arbor, will be very stable, plus making room for coil/cores.

So I'm leaning towards flange bearings with a separate shaft, then a coupler to motor, two sidewall supports, which bearings mount to, adjustable with threaded rod.

The rotor will be three, 1/4" thick pieces, glued together, the center rotor piece will be solid, to keep things uniform and balanced and to allow each 1/4" thick magnet to attract to each other, through that center rotor section.
Using cad, 10" diameter rotor with 12 magnets seems to work well.

I'm not sure what the bickering is about, though In my eyes, this is not a competition. Cooperation is just that, cooperation.
I'm not going to preach here, nor am I judging anyone, though the honest truth is, to be offended is a choice.
This is something I have come to realize and have put effort into taming whatever it is that seems to cause us to be offended, it really is like those old cartoons with some kind of entity on one shoulder and one on the other, we can choose which one we feed or neither and just stay neutral.

peace love light

[SkyWatcher]

Hi all, this is the design I have so far, the parts to connect the motor shaft will have to be devised still, though it's a start.
The counter balancing magnets can still be applied and more coils can be added, they're just not shown at the moment.
peace love light

[Pot head]

[SkyWatcher]

Hi pot head, thanks for sharing.
Not sure what you mean by almighty creator, though do explain if you like.

That's one heck of a build there, nice.

Could you explain how you have or had that one powering your house if you wouold like to share and also, what caused your nephew to destroy it, that interests me also.

Is it like the John Bedini scenario, guy comes in, watches johns device run, gets possessed by something and uses a hammer to destroy it.

peace love light

[BroMikey]

https://www.youtube.com/watch?v=hsnEuxDza6k

Ever thought of this?

[Pot head]

Hi pot head, thanks for sharing.
Not sure what you mean by almighty creator, though do explain if you like.

That's one heck of a build there, nice.

Could you explain how you have or had that one powering your house if you wouold like to share and also, what caused your nephew to destroy it, that interests me also.

Is it like the John Bedini scenario, guy comes in, watches johns device run, gets possessed by something and uses a hammer to destroy it.

peace love light

Hello, since I created the way I built my device, I am the almighty creator of it.
The battery bank is 24vdc @ a little over 1000 amps.
It took 12 hours from complete discharge to full charge in 12 hours.
That was before I had half of it completed.
It was always on and charging so less time was involved on a daily basis.

[alexelectric]

https://www.youtube.com/watch?v=hsnEuxDza6k

Ever thought of this?

very good, provide the magnet so that it does not stop before, and decrease the previous braking

[Netica]

Thanks very much for the help here Turion, a great detailed bit of information and it all helps for those who are working on these machines.

[j dove]

Big device

Hello, since I created the way I built my device, I am the almighty creator of it.
The battery bank is 24vdc @ a little over 1000 amps.
It took 12 hours from complete discharge to full charge in 12 hours.
That was before I had half of it completed.
It was always on and charging so less time was involved on a daily basis.

Hey Pothead,

Looks intresting, he couldn't have destroyed it all.
You could rebuild it.

Jeff

[SkyWatcher]

Hi all, Hi pot head, sounds good, thanks for sharing.
Yes, I would like to see that beauty running.
Sounds like with that large batt. bank, you were getting some nice excess energy effects.

I have a change of plans for my device, since I would like to use as much as I have on hand for this first, more practical model.
I'm going with horizontal rotor, though still same design rotor, with coils underneath the rotor.
This way, no need for separate motor shafts or bearings that will just add drag.

peace love light

[BroMikey]

very good, provide the magnet so that it does not stop before, and decrease the previous braking

Right now I have partial cancellation like everybody else except
for those manufacturing facilities that have millions tied up in CAD
driven robot CNC, like that make the stepper motors.

It requires precision machining first and after that there must be
some adjustment to compensate for differences of strength for the
same magnets. Magnets all have distortions in the them and to balance
them PERFECTLY to a whisper quiet is nearly impossible.

Make sure that if you build such a device that the structure is capable
of handling the stress. This is only a message for a practical application
not for 1 or 2 day runs. To power a home.

[Pot head]

Magnets

Here are some photos of my new junk build.
Warnings about magnets coming loose and all that stuff.
The last photo is a replacement magnet.
It left a shell that I filled with glue and a magnet.

[alexelectric]

Right now I have partial cancellation like everybody else except
for those manufacturing facilities that have millions tied up in CAD
driven robot CNC, like that make the stepper motors.

It requires precision machining first and after that there must be
some adjustment to compensate for differences of strength for the
same magnets. Magnets all have distortions in the them and to balance
them PERFECTLY to a whisper quiet is nearly impossible.

Make sure that if you build such a device that the structure is capable
of handling the stress. This is only a message for a practical application
not for 1 or 2 day runs. To power a home.

ok, but you're going to continue and make a demo prototype,
the information is appreciated