An Inquiry in to the Alien Reproduction Vehicle

[Gambeir]

This sighting, seen by another person besides myself, caused me to ask why the these circular illuminated spots. Thanks to the on~going attempt to replicate the Alexey device I now think I have a possible explanation.

Dielectric Barrier Discharge & Cold Atmospheric Plasma.
It has been known that Cold Atmospheric Plasma's can be made from Helium, Argon, Nitrogen, Heliox, and air. Siemens was the first to conduct experiments on Dielectric Barrier Discharge in 1857. More recently Darpa has verified the ability to sustain an open air plasmoid. There are two types of plasma's. Cold Atmospheric Plasma (CAP) is said to be non-thermal because it's electrons are at a hotter temperature than heavy particles which are at room temperature. Cold Atmospheric Plasma's are created through a dielectric barrier discharge (DBD), and which consists of two flat metal electrodes covered with a dielectric material. A carrier gas, such as air, moves between the two electrodes and is ionized by High Voltage to create plasma.

One electrode is a high voltage electrode and the other is a grounded electrode. Alternating Current (AC) of high voltage powers the dielectric barrier with high frequencies. Electrodes can be cylindrical or flat and the dielectric material may cover one electrode or both.

Atmospheric Pressure Plasma Jet (APPJ).
An Atmospheric Pressure Plasma Jet is a radio frequency plasma. The APPJ consists of two coaxial electrodes between which a feed gas ( can be mixtures of helium, oxygen, and other gases) flows at a high rate. The outer electrode is grounded while a Radio Frequency (RF) power is applied to the central electrode that creates a discharge.

[Gambeir]

[VIDEO]https://m.youtube.com/watch?feature=youtu.be&v=aDOAFFkHaH4#[/VIDEO]

Just about 24 min ago....

At almost end of video (18:00) he shows many different outdoor tests, different altitudes...at different day time...note sunlight.

Positive Plates above/neg below rises...looses weight...opposite increases it...watch scale diagram on right at almost end.

We all need A Russian Translator!!...the more I watch this...the more I believe in his work!!

Regards


Ufopolitics

OK, so maybe he does know a lot more than we do~
A very interesting video.

I just finished watching this video with the horrible google translations.
I just do not see any deception here at all. This is a real machine I'm quite sure.


You guys should use google translate and leave a message on his videos directing him to the new Alexey Thread which you need to create. Maybe if you leave an email for him he might then contact you and then the rest could be arranged.

I got to say this is so typical. Shows everything that's wrong with our world really. For example while he's got a working antigravity machine up and running, and while we here could use a Russian translator and some assistance from someone; meanwhile idiots with billions build rockets and airplanes. You tell me, are the rich this stupid or do you think that possibly it is intentional that these rich people are impeding humanity with bogus nonsense like giant fat airplane paid for by dumb dense clot or the man who stole Tesla's name with battery powered cars, an insult if there ever was one, and so don't ya think that these people need to have their resources dispersed?

Howard Hughes eat your heart out; biggest airplane in the world to fly Satellites in to space.

https://www.wired.com/2017/06/paul-allen-built-worlds-largest-plane-fling-satellites-space/

The gunpowder plot of 2019

https://www.space.com/40581-spacex-reusable-rocket-goal-elon-musk.html

[Gambeir]

Good morn Gambeir et al,

Alexey may not have a full understanding about the whole thing...but neither do we, I mean none.
We may be guessing for years even building a successful model...

But what am sure off, is that Alexey knows very well ALL SPECIFICATIONS related to the build in order to make it successful...and there are MANY LOOSE ENDS for all of Us here.

Like, speed of motors?...frequency driven by the Tesla Coil?...what is the Max V out of both DC HV spinning discs? are both HV DC positive-negative same exact values?...what are the scale ratios between static-rotary discs diameter?

For example...Sputins is building it based on the model 3...with magnets on top disc...we do not know how are those upper magnets set related to pole orientation?...are they repelling N-N?...Or are they in ATTRACTION N-S?

Assumption and a bit of common sense leads to conclude that ALL Magnets have N Vector (B-Field) aiming away from Earth...but that's only an "assumption"...not a fact.

Finally...that was just a suggestion to direct Alexey to its own Thread...with his name on it.

I believe a Building Thread would be a clean place to start, where many others could also follow/replicate based on all specs graphics shown...without theories nor assumptions until it gets off ground on a few replications.


Regards


Ufopolitics

Ufopolitics, the ARV thread has exceeded my most sanguine hopes.

A thread devoted to the replication of the Alexey device is necessary. A secondary thread specific to the theory of why the Alexey device works or how it could work is also called for; provided it does work and I feel pretty confident that it does work. It would be logical to have it's own place and I can get in to that idea myself. Start one, pin it so it's up on the top of this forum and go forward.

The whole idea behind this thread has never been to kill the idea that Aliens exist, for we can be sure that in the Cosmos other intelligent being exist, rather it has been my sole intention to explode the idea that UFO's we see are aliens. No advanced civilization coming here is going to expose themselves in this manner. They would have cloaking and or teleportation or something which made them invisible to our perception. In the future we might have fewer reports of UFO's precisely because we now have cloaking technology. A vanishing act will validate what I've just said: That the UFO's we see are not aliens as a rule.

Only machines made by mankind would be reduced to having to fly around in plain view, and then have to resort to developing some covert program to convince people these were alien vehicles, and in order to keep the knowledge hidden that they were machines paid for by you and me. No advanced civilization from another Star System would have to resort to that. They all would have developed cloaking because they go hand in hand. I don't think you could actually get very far along with this whole anti~gravity thing and not have stumbled in on it.

We are not seeing a war in space with Aliens as alluded to by Hillary's emails and the night vision films, we are seeing the true gangsters warring over who shall own and rule over the slave population of earth and who then shall be the new Gods to rule over these slaves.

I cannot believe, nor accept, that any civilization capable of transiting the Galaxy would have any trouble at all in defeating any weapon system we have. So that conflict, which seems evident, is not one between worlds. It is the same one that has gone on since organized crime pretended to be legitimate government.

If we do not succeed, if we do not pull ourselves up out of this Social media bull**** that's replaced TV for another generation, then those kids and their kids will be at the mercy of those people and they have no mercy to offer.

This device/machine of Alexey's is our first and best hope right now for a way to chip away at that un~governed criminal power which has stolen money and lives to create this breakaway civilization, because make no mistake, we are going to have to confront that power and we are going to have to understand it's machines a hell of a lot better than we do right now. You all may not realize this yourselves, not right now, but what you are involved in doing is far more important than anything else going on in the world today.

[Ufopolitics]

Alexey's new uploaded video...

[VIDEO]https://m.youtube.com/watch?feature=youtu.be&v=aDOAFFkHaH4#[/VIDEO]

Just about 24 min ago....

At almost end of video (18:00) he shows many different outdoor tests, different altitudes...at different day time...note sunlight.

Positive Plates above/neg below rises...looses weight...opposite increases it...watch scale diagram on right at almost end.

We all need A Russian Translator!!...the more I watch this...the more I believe in his work!!


Regards


Ufopolitics

[Sputins]

adding people to this forum has been troublesome for others.
I am all for it if it is possible

I might have figured out at least one reason why the center plate is needed.
when working out how to make the correct polarity field, you really want the 2 disks to have separate fields, without a boundary, one disk might mess up the other disk's field.

So the frame is coming along but await to mount motors, magnetic / electric discs, HV brushes, ultrasonic device and other bits. Pictures show a mock-up. I might have to increase the size of the threaded rods to a larger diameter.


I agree the central plate, neutral plate or centre tap plate plays an important roll. Its also the position to apply the RF from the Tesla coil evenly to both halves of the device.

The primary coil for the Tesla Coil is almost complete, just the circuit remains. - I'll use the circuit Spigel used, (BSpg on the forum) using a 2SC5200 transistor. The important thing is that the Tesla coil circuit self adjusts for factors that change the resonant circuit, so it remains resonant at all times, (important if the device moves up).
Sputins.

[Ufopolitics]

Look, Alexey has less understanding than we do. A thread devoted to replication is a good idea. Neither you, nor Spacecase0, nor Sputins, nor many others here need assistance. I need assistance, you do not, that's what I came here for to begin with.

I can assemble a convincing answer to a complex puzzle but I'm no electronics guy and neither are many others, but you people are, and so long as you understand what has to take place you can make it happen. This is an open air capacitor right? It's doing something right? What is it doing? Well I think it's fluxing HV energy: A flux capacitor.

What is the woodward effect about? It's all about fluxing. It's about stretching and shrinking at a very high rate of speed; what's going on with this machine and with energy? You can't just dump power in to a quartz capacitor and expect that to do what you want. You have to flux it, vibrate it, get it to mesh with the counter space. I see woodward effect as a meshing or some kind of attachment to the frequency which Universe vibrates at in counterspace and which then causes gravitational effects in matter.

This machine seems to be doing what is necessary for mass cancellation according to Woodward's effect; which is related to Mach's Principle in a round about way. Neither need to be made intensely complex to understand unless you insist on doing so, in which case they can be insanely complex, but that's not necessary to make a simple device operate. Anyways, no offense taken. A building and testing thread devoted to this topic is vastly more important and will outlive this one. This leave this thread open for whatever else comes along.

Good morn Gambeir et al,

Alexey may not have a full understanding about the whole thing...but neither do we, I mean none.
We may be guessing for years even building a successful model...

But what am sure off, is that Alexey knows very well ALL SPECIFICATIONS related to the build in order to make it successful...and there are MANY LOOSE ENDS for all of Us here.

Like, speed of motors?...frequency driven by the Tesla Coil?...what is the Max V out of both DC HV spinning discs? are both HV DC positive-negative same exact values?...what are the scale ratios between static-rotary discs diameter?

For example...Sputins is building it based on the model 3...with magnets on top disc...we do not know how are those upper magnets set related to pole orientation?...are they repelling N-N?...Or are they in ATTRACTION N-S?

Assumption and a bit of common sense leads to conclude that ALL Magnets have N Vector (B-Field) aiming away from Earth...but that's only an "assumption"...not a fact.

Finally...that was just a suggestion to direct Alexey to its own Thread...with his name on it.

I believe a Building Thread would be a clean place to start, where many others could also follow/replicate based on all specs graphics shown...without theories nor assumptions until it gets off ground on a few replications.


Regards



Ufopolitics

[Gambeir]

I totally agree.

However, I believe it would be better if we create a dedicated Thread about building/replicating his work...as also having his name on it...

Something like..."Alexey Chekurkov Anti-Gravity Replication".

As I also believe that the Member who should open that Thread be Sputkins, just because he is very much ahead/advanced compared to the rest of us in the replication...

I would help with as many graphics as you all need.

Sorry Gambeir, not trying to steer anybody away...is just to separate Theories about Arv's...from a real replication of an Antigravity device being built.

I believe is a great idea to help us ALL...plus am sure many members here who are fluent in both languages (Russian-English) could assist in translation accuracy.

Regards to all


Ufopolitics

Look, Alexey has less understanding than we do. A thread devoted to replication is a good idea. Neither you, nor Spacecase0, nor Sputins, nor many others here need assistance. I need assistance, you do not, that's what I came here for to begin with.

I can assemble a convincing answer to a complex puzzle but I'm no electronics guy and neither are many others, but you people are, and so long as you understand what has to take place you can make it happen. This is an open air capacitor right? It's doing something right? What is it doing? Well I think it's fluxing HV energy: A flux capacitor.

What is the woodward effect about? It's all about fluxing. It's about stretching and shrinking at a very high rate of speed; what's going on with this machine and with energy? You can't just dump power in to a quartz capacitor and expect that to do what you want. You have to flux it, vibrate it, get it to mesh with the counter space. I see woodward effect as a meshing or some kind of attachment to the frequency which Universe vibrates at in counterspace and which then causes gravitational effects in matter.

This machine seems to be doing what is necessary for mass cancellation according to Woodward's effect; which is related to Mach's Principle in a round about way. Neither need to be made intensely complex to understand unless you insist on doing so, in which case they can be insanely complex, but that's not necessary to make a simple device operate. Anyways, no offense taken. A building and testing thread devoted to this topic is vastly more important and will outlive this one. This leave this thread open for whatever else comes along.

[Ufopolitics]

I think Would be a good ideea to bring Alexey here on the forum to help peoplle to replicate his device with his advices.... what is your opinion ?

I totally agree.

However, I believe it would be better if we create a dedicated Thread about building/replicating his work...as also having his name on it...

Something like..."Alexey Chekurkov Anti-Gravity Replication".

As I also believe that the Member who should open that Thread be Sputkins, just because he is very much ahead/advanced compared to the rest of us in the replication...

I would help with as many graphics as you all need.

Sorry Gambeir, not trying to steer anybody away...is just to separate Theories about Arv's...from a real replication of an Antigravity device being built.

I believe is a great idea to help us ALL...plus am sure many members here who are fluent in both languages (Russian-English) could assist in translation accuracy.

Regards to all


Ufopolitics

[Gambeir]

adding people to this forum has been troublesome for others.
I am all for it if it is possible

I might have figured out at least one reason why the center plate is needed.
when working out how to make the correct polarity field, you really want the 2 disks to have separate fields, without a boundary, one disk might mess up the other disk's field.

Totally agree with the both of you.

I was thinking along the same lines till just these last few days.
If we follow the idea of woodward, wheeler, and Ufopolitics who tells
me there is no such thing as re~vectoring, and I think he might be right
about that, but so anyways;

It's Fluxing HV between magnetic fields spacecase0. Energy=mass, or something akin to it, and in the Woodward formula what you do is create a high state of fluxing/vibration.
Things are beginning to focus I think.

Think about it; you have energy which has a magnetic field. but which is put into a vibration/fluxing state, and by a rapid cycling field of magnetic energy exterior to it's own. Make any sense?

[spacecase0]

I think Would be a good ideea to bring Alexey here on the forum to help peoplle to replicate his device with his advices.... what is your opinion ?

adding people to this forum has been troublesome for others.
I am all for it if it is possible

I might have figured out at least one reason why the center plate is needed.
when working out how to make the correct polarity field, you really want the 2 disks to have separate fields, without a boundary, one disk might mess up the other disk's field.

[sinergicus]

Construction continues, slow but steady, the build is more advanced than these photos, updates to follow later.

I've completed a simple flyback driver with x2 IRFP260's along with various flyback transformers, wired to use the driver. It works quite well. I've also made the voltage multiplier used in the circuit. Magnets and discs are ready.

Working on the Tesla coil part. I have a coil to use wound already, but working on the primary coil and transistor circuit. Alexey uses a (PNP) transistor, KT819, so I'm looking for an equivalent transistors to use.

Still await further parts to arrive, but the frame work on the disc is taking shape.
Certain pictures below.

I think Would be a good ideea to bring Alexey here on the forum to help peoplle to replicate his device with his advices.... what is your opinion ?

[Gambeir]

Richard Hall is one of my favorite investigative journalists.
Cover up of discoveries in space & secret space vehicles

https://www.richplanet.net/richp_genre.php?ref=254&part=1&gen=5

This video runs 1 hour and 14 minutes. Of interest here begins at 58:00 minutes and runs for about 5 minutes.
[VIDEO]https://www.youtube.com/watch?time_continue=3651&v=RB43e95ZtdY[/VIDEO]

[Gambeir]

Counter-space & Ground


Al

Yes, it's intuitive I think, at once you get this idea of a magnet being an energy moving in one direction.

I used to talk to an Engineer and he used to say that if only you could figure out a way to make a ground to space you would have all the energy you could every want.

[Gambeir]

After that, what I really wanted to post, our latest sighting.
Last night about 10:30 pm silently passing directly over the house at maybe about 120 knots. Nearly invisible until very close, we didn't spot it until it was over the store across the street even though it was heading directly at us, and which is maybe 300 yards away. So at most we didn't catch anything amiss until it was at most 4 football fields away from us, and maybe 500 feet up in the air. It was about 100 feet across. Maybe a little more. We have a lot of jet traffic come over when they vector the traffic our way from Seatac. Our house being on the highest point around it's a natural vector.

Total sighting time is maybe 4 seconds, we we standing on the front porch which has a slight overhang, after the first second of shock I realized what I was seeing and leap to my feet running out in the yard to see it go directly overhead.

I think this is not a single thing but about 7 or 8 box like things linked together. My other half said it looked like a bar. To me it looked like one of the lights was lagging behind a tad, like they were in formation, but one a little out of place.

PS: Not an image, it's my depiction of what we saw. Art work so you have an idea.
I guess it was also 9/22 and not 9/23 but whatever.

[aljhoa]

Energies which flows through a magnet come from counter~space: Counter space being and unrecognized energy field. In my mind this field is a dielectric field; it separates charges using a magnetic field. This is probably a fundamental misunderstanding on my part.

We do not know what counterspace is then if it is not an energy which can create a magnetic field if it is not a dielectric field. We also cannot say it is the opposite of space; we just only say it cannot be detected here except in the ways it creates force, and that force all correlates to the development of a magnetic field.

Counter-space & Ground


Al