Joseph Papp, Air Inert Gas Design, by Heinz Klostermann

[wings]

During reading these patents I see that Klostermann engine can't reach high speed and torch, maybe this engine can work but at very low rpm because as standard endothermic engines need additional free electrons into the process. However this open an new scenario .. mixing my technology with this plasma method surely I can run an engine at 100% but with an right engine.

reading around on plasma and chemical reaction .... wow

Simple compouds and origin of life:

http://www.jh-inst.cas.cz/~ftirlab/Civis%20Juha%20Florencie%202008

and Diesel Exhaust NOx/Particulate Removal:
SwRI Technology Today - "Harmful Compounds Yield to Nonthermal Plasma Reactor--Sidebar"
SwRI Technology Today - "Harmful Compounds Yield to Nonthermal Plasma Reactor"

[tutanka]

reading around on plasma and chemical reaction .... wow

Simple compouds and origin of life:

http://www.jh-inst.cas.cz/~ftirlab/Civis%20Juha%20Florencie%202008

and Diesel Exhaust NOx/Particulate Removal:
SwRI Technology Today - "Harmful Compounds Yield to Nonthermal Plasma Reactor--Sidebar"
SwRI Technology Today - "Harmful Compounds Yield to Nonthermal Plasma Reactor"

Can be possible semplify a lot Klostermann reaction using just one plug not four as now using different circuit. I have ready circuit need to build just mechanical parts but in the next days I build and test and sent you results.

[tutanka]

patent and application

I have forget ... Thanks for post these patents

[wings]

I have forget ... Thanks for post these patents

[tutanka]

[wolf234]

Patrick Flanagan used generator, electron 10kV 44kHz,

[tutanka]

Patrick Flanagan used generator, electron 10kV 44kHz,

And? What is the application of Flanagan generator?

[wolf234]

ELECTRON FIELD GENERATOR

Patrick Flanagan's US Patent # 4,743,275 of May 10 1988.

Referring to fig.2, the field emitter 18 may be seen to comprise a slab or sheet 22 of a solid dielectric material such as glass, paraffin, acrylic, epoxy or other suitable dielectric in which a plurality of small particles or granules 23 of conductive or semiconductive material are dispersed. A pair of planar electrodes 24 and 26 are mounted to the opposite faces 22A and 22B of the member 22 to form a capacitor which may be encapsulated in an insulator 28. The member 22 is square when viewed from the top as are the electrodes 24 and 26, but these members may, if desired, be circular or of some other suitable shape. The corresponding dimensions of the dielectric member are greater than those of the electrodes 24 and 26. The insulator 28 is also a solid dielectric material such as glass, paraffin, acrylic, epoxy or other suitable dielectric and may be DOPED so as to include conductive or semiconductive particles or granules 29 dispersed therein.

As shown, the electrode 24 is connected to one terminal of a high voltage, high frequency source of electric energy 30, and the electrode 26 is connected via ground to the other terminal of the energy source 30. The voltage applied across the emitter has a frequency of at least 20 kiloHertz and a voltage of at least 5000 volts rms.

The reason why the field strength is increased by the presence of conductive particles in the dielectric material is not fully understood. However, comparative tests have proven that the electric field is strengthened and significantly improved air purification is achieved when such materials are dispersed in the dielectric, and it is believed that the work function of the dielectric is altered by the added material and this results in the increased emission from the device.

[tutanka]

ELECTRON FIELD GENERATOR

Patrick Flanagan's US Patent # 4,743,275 of May 10 1988.

Referring to fig.2, the field emitter 18 may be seen to comprise a slab or sheet 22 of a solid dielectric material such as glass, paraffin, acrylic, epoxy or other suitable dielectric in which a plurality of small particles or granules 23 of conductive or semiconductive material are dispersed. A pair of planar electrodes 24 and 26 are mounted to the opposite faces 22A and 22B of the member 22 to form a capacitor which may be encapsulated in an insulator 28. The member 22 is square when viewed from the top as are the electrodes 24 and 26, but these members may, if desired, be circular or of some other suitable shape. The corresponding dimensions of the dielectric member are greater than those of the electrodes 24 and 26. The insulator 28 is also a solid dielectric material such as glass, paraffin, acrylic, epoxy or other suitable dielectric and may be DOPED so as to include conductive or semiconductive particles or granules 29 dispersed therein.

As shown, the electrode 24 is connected to one terminal of a high voltage, high frequency source of electric energy 30, and the electrode 26 is connected via ground to the other terminal of the energy source 30. The voltage applied across the emitter has a frequency of at least 20 kiloHertz and a voltage of at least 5000 volts rms.

The reason why the field strength is increased by the presence of conductive particles in the dielectric material is not fully understood. However, comparative tests have proven that the electric field is strengthened and significantly improved air purification is achieved when such materials are dispersed in the dielectric, and it is believed that the work function of the dielectric is altered by the added material and this results in the increased emission from the device.

I know perfectly Flanagan generator but.. what is the usage? Klostermann use Flanagan generator? surely not!!

[wings]

Alternative Energy - Ammonia As A Fuel (Katie 2 Minute Talk) - YouTube

[wings]

Alternative Energy - Ammonia As A Fuel (Katie 2 Minute Talk) - YouTube

Hydrofuel NH3 (ammonia) Car - YouTube

Hydrofuel Inc. - The World's leading developer of ammonia fuel and energy technologies - ammonia car technology - Home

Introduction |

[tutanka]

Hydrofuel NH3 (ammonia) Car - YouTube

Hydrofuel Inc. - The World's leading developer of ammonia fuel and energy technologies - ammonia car technology - Home

Introduction |

Ammonia was old project .. ok we are talking every of nitrogen molecule but this new way is completely different.. the new tech burn just air directly without the creation of new burnable molecules like ammonia.

[tutanka]

Heinz Klostermann tech ... nothing of new!!

After test I can announce that Heinz Klostermann technology don't have nothing to do with the electrino reaction is just high current shock on metal piston..

The method used from Klostermann is similar to that....

Plasma-powered cannon - Wikipedia, the free encyclopedia

Anyone can replicated simply you need just a capacitors bank and SCR switch.

The grey box in first video just contain the capacitors bank .. and without the variable AC transformer model No-48-1205 they can't charge capacitor bank.

You can found here the variable AC transformer used from Mr. Heinz Klostermann FRYS.com*|*PHILMORE ..

They use this unit for control the step-up transformer and obtain 500Vdc in output for charge the caps bank

[Terbo]

The technology presented on video http://www.air4gas.com is patent pending.

If you are interested to use this technology please contact belgium company for license agreement.

How much input power was required to create the plasma shown in the video? Have you measured the output power available in the plasma? Is the process overunity? What is the COP?

[tutanka]

How much input power was required to create the plasma shown in the video? Have you measured the output power available in the plasma? Is the process overunity? What is the COP?

I have start little test in little time using capacitor 1650uF and POWER SCR for discharge capacitor. But the kinetic energy born from high current discharge inside little chamber similarry to this video klostermann kanon lange 720p - YouTube