Welcome to all new members.

[Farmhand]

I would like to extend a big welcome to all new members. I was going to try to answer all the new members individually but there are too many of you. Which can only be a good thing, I am staggerd by the numbers. It is heart warming for sure.

So all on behalf of the other members as well. Most are very focused, dedicated and very busy in this field, it is a very interesting thing is Energy.

If anyone has an interesting idea to share please do, or a question to ask go ahead.

Thank you all for joining and enjoy.

Andrew

[MonsieurM]

wanted to bump it up to welcome all new Members...hope you'll find and contribute in this lively forum..

[towjoe42]

New Member

Looking forward to many years of interesting posts both reading and posting. I am winding down on my towing profession and looking forward to semi-Retirement from the towing industry.
I work on computers as a Hobby now. I like gardening and grow Tomatoes, peppers, Orange trees, Papaya, Black walnut, and Pecans, mango, peach, and bananas, grapes, nectarines, roses, cactus, succulents, and Orchids.
I like to work on old flat head fords and have about twelve ford trucks. One 41 and one 47-ford pickup.
I like to build and refurbish tow trucks and occasionally sell one here and there.
My recent work is a one-ton ford tow truck. It has an eagle claw box and lift. I had it modified by "Wrecker Man Sales and Service" in Irwindale, CA. He removed the eagle claw towhead and built and installed a Dynamic Auto Loader Head. This improves on the Eagle claw design with a safer capture of the vehicle's wheels for towing.
I also had a firestone Air bag suspension added to the rear, and increased the springs to nine with two overloads. I built and installed a 400 lb counter weight pusher bumper on the front.
My most recent truck is a 1972 Chevy 3/4-ton fleet side pickup. It has a "sneaker Lift" manufactured by Hi Tech recovery in Texas.
I put firestone air bag system on the rear. I will increase the springs in the rear to nine and install a 400 lb counter weight from Minuteman manufacturing.
It has a 350 V8 and an automatic. I may install a Cummings Diesel Motor and Automatic with a Gear vendor Under/Overdrive unit attached to the rear of the transmission.
There will be a 5th wheel assembly in the bed to tow trailers.
It has a backup camera and monitor in the dash. There is a DVD player and a GPS unit there also. Real nice setup for light duty tows.
I also have a one-ton Chevy with a sneaker lift and a flat bed.
My newest truck is a 03 Ford super duty pick up with a Minuteman HDH autoloader tow lift in the bed. It was originally designed for repo work, but found widespread acceptance as a general tow lift as well as Impounds.
I attend a fundamental Bible Teaching Baptist church, and like Bible studies.
I attended two years in a Southern California Baptist Bible College, and qualify for my AA in Biblical Studies, also two years in Junior college, and two years in Vocational Rehab funded by the VA and attended Computer repair school and got a hand full of computer certificates as well as my A+ Certified Computer Technician Certification.
I spent 18 years married to a wonderful woman even though we split up. I have been married to the current and last Mrs. Wonderful for twenty-five years.
I also played around in the US Navy for twenty-three years and am a USN Retired Vietnam Veteran.
I spent the last twenty five years behind the wheel and desk of a tow company in Southern California and after one of our Liberal Assembly persons screwed up the vehicle code, I found it harder and harder to function as a Impound Tow Operator, so it is time to toss in the towel for most of what I have developed, and selling most of my business to another larger tow operation. I am keeping my one foot in the arena and hope to make a difference in California to smooth out some of the Vehicle Code laws so they are fair to not only the motorist but the owners of private business property and the tow operators. I am a member of the California Tow Truck Association.
I am disabled and after numerous injuries during my Naval Career to various joints I had become addicted to prescription pain Meds, and Alcohol.
I have not had Alcohol since October of 1978, and now thanks to Medical Marijuana I am free of Chemical and Narcotic Pain Medications. That may be difficult to understand, but many readers out there on the forum will understand.
Four years ago I was diagnosed with Chronic Lymphocyte Leukemia, or CLL.
I began to research on the Internet for alternative natural medicine for my Leukemia and painful disabilities.
I found Granny Storm Crows List on Youtube and she sent me via email her PDF list of hundreds of Scientists and Doctors and thousands of their research papers on the treatment of various diseases using THC.
I then found articles and video presentations of Dr. Robert Melamede starting on Youtube. He also is the founder of the phoenixtears foundation, which provides information on how many diseases are helped with Cannabis and THC. Dr. Melamede is a professor at the University of Colorado in Colorado Springs. He is not connected to Rick Simpson's site.
I also found links to a Mr. Rick Simpson's site at Phoenix Tears
I read many articles on treating and Curing Cancer, Diabetes and many other life threatening diseases.
I obtained my official California MMJ ID card issued by my Local County Medical office. This allows me to obtain Medical Marijuana, which I use to treat my CLL, my pain, and now my skin Cancer.
I have been using the Hemp Oil described on Phoenix Tears
Another interesting site is The SETH Group they show Brain Cancer cells being killed by THC and the normal brain cells left alone and healthy after 24 hours.
For four years and so far my CLL White Blood Cell Count is still at Stage 0.
When I get my severe migraine headaches, and pain in my Hip and knee and lower back, (Spinal Stenosis) I take a tiny drop of Phoenixtears hemp oil and my pain is gone for up to 48 hours. They do not sell the Hemp Oil on Phoenixtears. The site is dedicated to freely giving those diagnosed with Cancer, Diabetes and other diseases the information needed to produce their own Hemp Oil to self-treat their own medical conditions. If this site really got out to the general public and people with Cancer and Diabetes and other diseases began to Heal Them selves with the HEMP OIL with THC millions of people all over the world would be healed.
I had been recently diagnosed with "Bowen’s squamish Cell carcinoma" cancer on my forearm.
They did a biopsy on it, which came back positive as cancer, and I immediately began putting Phoenixtears Hemp Oil on the wound and it healed in record time and no other sign of the cancer returning.
If it does, I will just put the hemp oil on it and cover it with a bandage.
My dermatologist was very pleased with the healing of my wound from the cancer. I told her I was using Hemp Oil to help it heal and she only could remark that it looked good.
For those out there who are US Veterans, the VA about 18 months ago came out with a directive that stated any veteran who revealed that he/she was using Marijuana would not be penalized or have any benefits taken away if they are using marijuana. They only would modify the other pain meds they prescribe so that there is no over prescribing of other medications due to the use of Marijuana.
Now lets see, the DEA is an only an "Agency" level group in the US government and they say it is bad to use Marijuana, and that it does not have any valid treatment for any diseases, pain or any thing else, and will not let it be reclassified to a more lenient level classification from Class 1.
The "Department of Veterans affairs" is a larger "Cabinet level Department" of the US Government, and they tell us veterans that the personal use of Marijuana is all right for us to use to control our pain.
So all that is a paradox isn't it?
So, I hope I have not offended or put anyone to sleep. That's my life and I will stick to my story. I will see if there are other parts of this forum to explore some of these things that are happening in my life.

[GreenVibe]

GreenVibe

Hello everyone,

Fantastic forum, I would like to introduce GreenVibes services to the forum, we provide recruitment solutions to the Environmental, Sustainability and Renewable Energy sectors without costing the Earth!

Our business model will allow us to donate a percentage of our profits back into Eco friendly charities and projects to ensure we are putting something back into the Eco friendly world and help provide a sustainable future for the next generation.

Providing Eco friendly sustainable recruiting solutions to the Renewable Energy, Clean Technology, Carbon Management and Sustainability markets.

Specialties include Solar thermal, Solar PV, Heat pumps, Geothermal, Wind Energy, Hydrology, Marine, Fuel Cell and Hydrogen.

Experts in the field of Recruitment, Executive Selection and Advertised Selection.

If you are interested in discussing your next career move or are in the postion to employ additional employees feel free to get in touch.
Home - Green Vibe

Best regards,
Phil

[aion12]

I just started to play the game,The future Exchange

[gtmbiz]

need help from Tesla coil electric bulb

A big hello to all members i am new here and would be glad if any one that have an ultimate knowledge on the innovative idea on how to build tesla coil to power a bulb light.Please if you can help i need help for Tesla coil electric bulb my contact is [email protected] Hoping to hear from you soonest

[gtmbiz]

need help from Tesla coil electric bulb

A big hello to all members i am new here and would be glad if any one that have an ultimate knowledge on the innovative idea on how to build tesla coil to power a bulb light.Please if you can help i need help for Tesla coil electric bulb my contact is [email protected] Hoping to hear from you soonest

[afraidcrrazy]

Hi All,
Newbie here from Miami.

[gtmbiz]

Thanks Erick my name is Taii Loba from Montreal -Canada i would be glad if you could help me to develop this project{Tesla Coil lamp to used for a Lamp} here is my contact [email protected] hoping to here from you soonest.
[/FONT][/B]

[spidermother]

great!i feel rather happy here and read yours, R4wish you all good day

[IEatFrauds]

Thanks for the welcome fellow farmhand.

Hi all you energetic souls out there.

I am a new student at the University of Tesla and reading myself silly looking for my first project to build.

[mnsman]

Thanks for the welcome

NUG here. New Ugly Guy is what we used to call em in the army. I'm sure there are a few of you out there that used that term.

To the point. My first post entitled "Hello everyone from the new guy" in the New Members Area. Can that be retitled? Maybe "Hello from NUG with 75K rpm motor". That would be more to the point.

Looking for input for my project. What would you do with a 75,000 rpm pulsed dc motor? Besides duck and cover? How many out of the box thinkers are on board here? I think there are a lot. I offer a few of my own suggestions for experiments. I'm looking for input from all of YOU. https://www.youtube.com/user/mnsman1

This isn't spam. I am sincere and hopefully on to something. You be the judge and let me know what you think after giving the project a fair shake. Unfortunately that means devoting a bit of your time to see what I have to say. But don't expect Hollywood productions.

What I have done is very reproducible if you take the time to make the pancake coils I describe. Otherwise as builds go this is on the easy side. Bearings, ring magnet(diametric), shaft, hall, mosfet, cap etc.

Thanks for the forum.
Jim

[Harry24]

Thank you for the warm welcome, this is my first forum visit! Looking forward to learning and sharing knowledge!

thanks again

[dailyenergy]

Hello everyone. I am new here and I look forward to a great energy exchange of ideas, thoughts, news, etc.

Happy New Year!

[mire]

Hi Im new here, please send me to the free energy forums thanks..