Stanley Meyer Explained

[h20power]

It is really very easy, it is a fancy name for something crossed wraped. Wrap the first level at a 22.5 degree angle and on the return wrap second layer just the opposite. Do this with bifilar wire and at put the green or red wire to the start of the oppsite color, that makes a dual primary coil. I did post some pics of a bifilar wraped coil of Tesla's design.

Right now my PC is down so I can't draw a picture of it the best I can do is walk you through it as I just did. Hope this helped some,

h2opower.

[pmazz850]

Bi directional

Is this what you mean H2o?

[pmazz850]

Sorry. See pic.

[pmazz850]

Correction

It should have looked like this. This is what I think you mean.

[pmazz850]

I drew it like that so one could understand. If I draw one on top the other, I think it will look like a pile of junk. I'll try and see how it looks. As far as the angle, I didn't measure it just drew a quick sketch.

[pmazz850]

I believe it will be a 45 degree angle. Hows this?

[gpssonar]

Thanks alot, that clears up alot about the bidirectional wind. I've been wondering about that for a while now. Again thanks H20POWER and Pmazz850for clearing that up for me im ready to move forward now.

[paulsonaivy]

stanley meyer explained

Thanks alot, that clears up alot about the bidirectional wind. I've been wondering about that for a while now. Again thanks H20POWER and Pmazz850for clearing that up for me im ready to move forward now.

gr8 work
could someone make small video of the winding pls
its still confusing
rgds paul

[h20power]

I believe it will be a 45 degree angle. Hows this?

Yes that is correct except there is no space between the wires. This is done to get the maximum magnetic field strength to get the maximum magnetic you must have one wires space between the coils wires. This is automatically done with the use of bifilar wire, this is already known and can be found in any transformer design books.

Meyer didn't lie to us in this case he just used words not in use other than in patent talk. I found an example of what it was in a unrelated patent while doing patent searches and I shared this very important information with everyone.
Thanks for making a drawing that is very easily understood. I just wasn't content in making that transformer with some of the words not being understood. In this case those missunderstood words made a very big differance in the magnetic field type some say it produces something called scalor waves, I just know it doesn't work the same as one wraped like a solinoide.

h2opower.

[sebosfato]

I can say to you that you don't really need to care much about using bifilar wire, you can use any wire. You must only be able to make the transformer self resonance be much higher than the resonant cavity frequency. By minimizing the inter winding capacitances if you can is best to make only one layer ore in the case you make more layers one very well insulated from the other. However as secondary inductance get bigger the self resonance frequency of the transformer lowers but also this is not that important because when the transformer will be connected to the tank its self resonance will be far way lower than the tank. And is better to use toroidal ferrite core as to need less wire on the transformer. The diode has two effects it helps blocking any oscillation on the transformer and allow the current to go only in one direction this is good for not having the high power developed on the resonant cavity back in the transformer destroying it.

Don't turn on your transformer without connecting secondary leads it will blow your transformer at the self resonant frequency.

Only two things are critical

Maximum current output of the transformer and high voltage insulation.
Maximum current is = to maximum voltage divided by secondary impedance and secondary impedance is = to the primary impedance multiplied by the transformation factor of the transformer squared. However when you design a resonant cavity witch have a certain complex impedance you can design the transformer to go up to a higher voltage than maximum found on calculation pushing the circuit thats what meyer was saying when he said something like " theoretically the output current of the vic transformer should be few micro amps but will however consume about 1 or 2 mili amps "during operation because its not and ideal LC circuit its an LRC.
I suggest you to visit my thread i posted and exel sheet for the calculation of the resonant cavity or resonant tank or voltage intensifier circuit.
and the transformer windings. You just choose your resonant inductor and capacitor and voltage and resistance and it gives you the transformer winding values, resonant frequency, impedance, complex impedance, maximum voltage and current. Read my thread:

http://www.energeticforum.com/renewable-energy/4617-stanley-meyer-true.html

[h20power]

I ask everyone to just follow Meyer on this one for now you know what the words mean you can get to building the, I belive it's figure 6.1, transformer the right way for the first time. Once you build one the right way run some test and observations then you can make changes but not before. Use the scientific method for this is when it is most important when testing out something that is new to you.

Also make sure it is an isolated circuit the secoundary side for Meyer did it that way for a reason. If you don't then don't expect to get the same results Meyer did for that would be insane. I use bifilar wire for I wound these transformers by hand and it makes it very easy esspeshally with the fine size wires. For I don't know about you but trying to wrap some 40 gage wire and keep parallel by hand is for me, as well as many of you out there, imposible so keep it simple stupid just as Meyer tells us to do. Buying wire already parallel bonded is just a smart thing to do for bifilar wire should be used for the whole transformer primary, secondary, and chokes, it even doesn't hurt to use it for the pick up coil.

h2opower.

[TRON]

A PLACE to SHARE VIDEOS

I have started a web page to post Experimental results on VIDEO

I have started a web site:>>>>>>>> The Gorilla Has Spoken <<<<<<<<<< for the Inventors and hobbyists attempting new energy projects to post their successful VIDEO replications or at least their attempts! The videos must be less than 100MB and in AVI format or MP4

[Tecstatic]

Thanks a lot

Is it possible to save the videos on my own computer, thats very important IMO ?

Eric

[TRON]

RE: Saving Videos

If they are yours you already have a copy... thats how digital rights is supposed to work.
I have a video, i want to share it, but i want to retain all property rights to it...of course im not going to let people download it...its my work, and my money....i will let you watch it, but if i let you download it, whats to keep you from using it in an unauthorized way? what keeps you from selling my stock footage to a documentary film?

Its not legal to download other peoples work!!
Its not ethical or moral either...

[gpssonar]

Is there any latest electronic designs on the Gas Processor? Any new developments?