Stanley Meyer Explained

[Oneminde]

I don't know where he is getting all of his stuff but the VIC transformer cost no where near those amounts, the whole set(conversion from gasoline to water as a fuel source) up should cost no more than $1500-$2500 USD. Remember Stanley Meyer was going to charge $1500 USD for the conversion from gasoline to water. Now in my cost I also include the cost of the car for the project and my total is somewhere around $2300 USD with the test car though I do have to add everything up but that is close to how much I have spent thus far.

But really the question you ask is not the right type for this is a question of your freedom, how much is your freedom worth? For that is what is at stake here, your freedom in the form of energy independence. How much are you willing to pay for your freedom? For once you pay it you are free, free to drive anywhere you so desire, and leave all of your lights on in your home while your away for it's now free to do so. You will be incontrol of your power production not the grid system connected to the power plants powered by the energy sellers. You will be free of any and all forms of energy being sold on the market today. Your coal usage will only be in the form of a BBQ, and your oil use will be only to lubricate your engine, transmissions,..., ect, and note they wont have anymore carbon build up, the primary source of engine failure. This is what it is all about, freedom, true freedom.

Best wishes to all,

h2opower.

freedom & independens. Now, during my time infront of my computer and text books i discovered John Bedini, Nicola Tesla, Tom Bearden, Peter Lindemann, now what these indiviuals did was to show me that i was deceived, demorolaised and reduced to a fool simply becose no one was ever goping to tell me the truth or show it to me - this was and still are ones own taskt do discover - i think we all know this by now and the reason why. The corporate world and oh yes GREED. YES i am planing a Bedini SG similar system as one power source in my car, but that is another discustion.

So the answer to your question; what is the price for my freedom? - that is everything i can afford - meaning my time and money and in the end (to be dramatic) my life - but i choose to live my life, so for that reason i am going to pay what i can.

Now, a reasonable and plausible amount/cost for this system should be whitin an area of $1500 - 3000,- so i dont understand why sebosfato have spent nearly $8000,- dollars on it. After all, moste of the construction has been covered, there alsow exist "of the self" parts like the VIC circuit wich are based upon the original and should work. Now that last part, as a matter of fact i whould like to get that examined further by you people - to get it verified or close to that. So i am going to put up some information about that soon in an attempt to actually get even closer to a fhinised system... and i hop that is allright? (new post)
...

Now, there is another question that i whis to raise and that is The E.V Grey Conversion Tube and circuitRadient Event and of curse a simple expleantion done by Aaron Murakami and i hearby quote:

We need Longitudinal waves allsow but i think we allready know that right?

(Hope this was okey Aaron?)

To be honest, These words by Aaron was only a confermation that i was on the right track, aspecially after reading the documents (4) that i added earlier. The question is if a Grey system should be added OR The Bedini SG and allow that to be the energy.. i do not know why i am asking this, maybe to get some attention on it, not necessarily a long discustion.

(Will get right on finding the parts that i was talking about earlier)

[sebosfato]

Guys don't fool your selves thinking you can do it without an oscilloscope a LCR meter, good multimeters, probes... I said 14 samarium cobalt permanent magnets i need cost more than 2000 euros...

Anyway I gave you the way to real get resonance if you are really interested you are going to understand what i wrote.

All I'm saying is that I already had to buy all the equipment and that i have knowledge to do that, is absurd that people burn them money on this research buying stainless steel wires... building transformers without know anything about how it works i started this way too but i saw is impossible to do it without knowing what are you doing. All I'm offering is to put our forces together and than share the results, this way useless tests don't need to be repeated. I already have more than 3 years of everyday research, a transformers manufacture that give me cores and wire... the all the needed parts from pll circuit meyer designed with the resonant scanning circuit, lock indicator and logic, gate, driver, feed back circuit, VIC...
I need to find a job and work for 4 months to buy the things i need, thats why i'm saying lets join our forces and i'm going to share the results of this test with who is interested. And it will be ready as soon as possible.

[h20power]

Hi Oneminde and everyone else that reads the threat,

In reading that quote I can see it is wrong. This is why so many have failed in their attempts at Stanley Meyer's WFC by not understanding what is going on. The WFC upsets the natrual equilibrium of water by elongating the water molecules then consuming the electron before it can snap back, that is why I said without the electron extraction circuit the WFC will not work. I have seen so many trying different things in the past that where all the way wrong, like pulsing the field of the rotor of an alternator, even in Stanley Meyer's own video he says he applied 5 volts and 2 amps of electrical energy to the field of the alternator. Once anyone takes the time to break down how an alternator makes it's voltage they will see that the VIC transformer is, for the most part, the same thing. The way the VIC transformer works is the same as the way and alternator works in that there are individual bobbin coils in both designs. In an alternator the magnetic field is moving cutting the individual coils as it does, in the VIC transformer the magnetic field is expanding and collapsing cutting through the bobbin cavities coils as it does. The net result of the way the two work is the same. I have never to this date seen anyone ever put the electron extraction circuit to the WFC thus why I have never seen anyone replicate that part of Stanley Meyer's technology.

The injectors work differently, they break the water down by treating the water as a dielectric, and work in the same manor as a Kelvin Genarator for the most part, but in this Kelvin Genarator you will not get much water in the bucket for the voltages are far too high and the water seemingly evaporates before it can hit the bucket, but hopefully if you have read and understand the information in my thread you know differently. This is why in some of Meyer's videos he stresses that water is a dielectric liquid for that very reason.

As for the use of samarium cobalt permanent magnets, I will not be using them and I expect no one else reading my thread should be using them. But since I am interested in what you might be trying could you make a new thread and tell what it is you are trying to do sebosfato and why do you need them?

In this thread for the most part I don't think I have left anything out in Stanley Meyer's water for fuel technology, and the one thing I stress is the all important "Mixture" needed for water combustion. You have to have this "Mixture," though it matters not how you go about getting the "Mixture," in your combustion chamber proir to spark or heat ignition. Energy independence is now yours for the taking.


h2opower.

[sebosfato]

On the ends of the two thick coils sits two high amp diode and one is connected in parallel with this first cell and the other is connected this same way but back to back to another cell as to allow resonance to happen and current to recirculate. As you have two cells each one having current in only one direction when you reach a determined amount of recirculating current you will have enough voltage to auto ionize the water recirculating the liberated electrons creating a chain reaction effect. One electron liberate 4 and than 16 ... always recirculating.

The magnets is needed because i have my resonating coils around my electrodes and with the magnets i can 1 already have a force on the water alining the molecules and 2 together with the coil it create a very high magnetic pulse. 3 it lower the inductance to a minimum allowing high frequency to be applied. Higher number of cycles higher the effect of the chain reaction.


In the future i want to create a new thread when i have it working.
now i'm just trying to find some money for the magnets as the rest is almost ready. I thought if any of you want the meyer pll design with the resonant scanning circuit, and feedback, driver and mosfet. you can ask me to build one for you this way you can help a lot my project. Or if you want a vic or anything, transformers i can do also.

News soon hope you understood the current recirculation thing. if you go to this link you can find easy to understand diagrams and information

http://www.panacea-bocaf.org/files/Trans-verter%20R%20and%20D.pdf

Peace

[Oneminde]

[h20power]

Where did you get that quote? Stanley Meyer never said 42.8k Hz he always gave a range like from 5k-50k Hz or higher if needed. I myself am tuning everything to 50k Hz for both the Gas Processor and the modified injectors.

Did you all understand the importance of the "Mixture?" The "Mixture" is comprized of primed air gases and atomized water mist that has been given a very high image charge to the point of shorting out the micro capacitors created by passing the water though the voltage zone, as the surface area decreases due to evaporation and over voltage the micro capacitors short out as the air breakdown voltage is reached. The recirculated exhaust gases are to slow the burn rate of the resulting reaction of the "Mixture," and to make sure you don't have a melt down in the combustion chamber.

Most of what I just wrote can be found in the Canadian patent for the fuel injectors. For if you don't get the mixture your not doing it like Stanley Meyers did. Sure it may work but don't expect me to have any imput to how things may play out for you. For the one thing I do know is there is more than just Stanley Meyer's way to run an engine off of water. But like the title says, "Stanley Meyer Explained," not anyone elses. Though I understand how some of the others work I will not go into it, for I think this is the best way by far and why should I for they are still living.

Happy building everyone,

h2opower.

[tutanka]

Every same words.. nobody that it has made to see nothing! You will not find no investor that she will give money without to see that your ideas have a foundation. A small prototype is necessary or you have the money in order to make your plan independently. However this is my new cell, on it I have apply in part Meyer concept only in destabilization module named "E" in my posted diagram. The cell use new design called serie cell and water is mineral water without addition of KOH or other electrolyte.

[Oneminde]

Every same words.. nobody that it has made to see nothing! You will not find no investor that she will give money without to see that your ideas have a foundation. A small prototype is necessary or you have the money in order to make your plan independently. However this is my new cell, on it I have apply in part Meyer concept only in destabilization module named "E" in my posted diagram. The cell use new design called serie cell and water is mineral water without addition of KOH or other electrolyte.

Is this a bi-polar dry plate construction? For what i see there is 1 anod & 1 katod whit 6 neutral plates, is that correct?

Nice work

[Oneminde]

[tutanka]

Is this a bi-polar dry plate construction? For what i see there is 1 anod & 1 katod whit 6 neutral plates, is that correct?

Nice work

This cell is composed from 15 plates, powered to 28Vdc and use new internal design concept.. not dry cell OR anything that you have seen on market.. cell is sealed and water is injected to pressure with a electric pump. Internal plates are in serie,the water can go only to one direction and each plate is separate from others. This cell is for produce hho for power with success an scooter 50cc. I have build this new cell for resolve problem of old white cell that you can see from photos. For obtain 28Vdc I use an dc/dc converter and PWM. As you can see I have modify others parts presents on scooter and I have design new ignition support and new miscelator/injector for hho

[Oneminde]

This cell is composed from 15 plates, powered to 28Vdc and use new internal design concept.. not dry cell OR anything that you have seen on market.. cell is sealed and water is injected to pressure with a electric pump. Internal plates are in serie,the water can go only to one direction and each plate is separate from others. This cell is for produce hho for power with success an scooter 50cc. I have build this new cell for resolve problem of old white cell that you can see from photos. For obtain 28Vdc I use an dc/dc converter and PWM. As you can see I have modify others parts presents on scooter and I have design new ignition support and new miscelator/injector for hho

My reason for this is my limited knowledge on the vic circuit so far.

Peter Lindemann about Stanley Meyers patent

[tutanka]

[QUOTE=Oneminde;57728]Is this a booster variantion or are you running the engine on this device only?
[QUOTE]

Scooter is bifuel.. gasoline OR hho 100%.. you can switch simply with an click..

[Oneminde]

Scooter is bifuel.. gasoline OR hho 100%.. you can switch simply with an click..

So what you are telling me is that you can

[pmazz850]

So what you are telling me is that you can

[Oneminde]

pmazz850