Announcement

Collapse
No announcement yet.

TUBE DRIVEN TPU'S The construction zone

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RAMSET
    replied
    Welcome to the team Ralphy

    First I thought it was a Bug then I changed it to a turtle
    No matter its quite cool .............
    Speakin Of Cool
    Willy's Freakin Cool!!!!!!!!!!!
    He's like a Mad Humaalien Scientist

    Thanks
    Chet

    Leave a comment:


  • willy96
    replied
    Willy's Audio TPU's tube and transistor

    willy is laying out the tpu in full with unargueable proof then we shall advance it !


    so this is next the tpu driven by a freq genny and a power amp ...
    we term this power assisted tpu ...

    thease devices are ether spinners ... agin a simple device aircore coil rotation is caused depending... the simplest way to understand this is to make a coil and drive it all 1 wire is best to start basically in a motor generator set this is your rotating magnets ...

    your coil must!! be impeadinced matched or you run the risk of blowing the amp

    i have a few amps i can designate to this cause .. some tube and a tube freq genny as well as transistor amp and genny ..

    make sure imput does not get to high it will fry the amp .. exp talking ......

    W

    you know its me ...

    white stripes!

    Jolene - The White Stripes - YouTube such a show the 2 of them
    The White Stripes - YouTube
    Seven nation army - Audioslave - YouTube
    welcome to my sound garden !
    black hole sun
    Soundgarden - Black Hole Sun - YouTube

    so where are we hideing the hot tesla writers ? cupple books under her belt ... gonna kick my feet up soon ya know
    i have noticed hot damm chicks write books about tesla ... damm hook me up


    'It Might Get Loud': Jack White's favorite song - YouTube

    Last edited by willy96; 11-11-2011, 03:41 AM.

    Leave a comment:


  • Dave45
    replied
    Originally posted by MonsieurM View Post
    Copper and silver Iron...interesting....Dave....Romo....
    Willy's got something in mind I just watching.

    Riot - Magic Maker - YouTube

    Leave a comment:


  • MonsieurM
    replied
    Originally posted by ralphwinkle View Post
    *Sigh

    Its not a turtle...its a Scarab Beetle....ancient Egyptian
    If Ramset see a Turtle, it is a turtle...works the same...don't get hung up on little details...makes it hard to work as a team

    Leave a comment:


  • MonsieurM
    replied
    Originally posted by willy96 View Post
    you know i can keep talking of many ways SILVER IRON AND COPPER can be used with VOP

    like for instance ...

    iron from source to limit flow ... spark gap as its a broadcast point and a point of eather interaction connect to copper .. we gain speed via gap from eather as i just explained so

    say it left source at 20%vop to gap hits 100% enters copper at 60% we at gap have over spew rf noise ... tap it there ..... signal leaves copper to antenna goes from 60% to 100% it is now in free space .. reciever is say 90 % we harvest!


    and the bulbs glow ...

    W

    Copper and silver Iron...interesting....Dave....Romo....

    Leave a comment:


  • willy96
    replied
    just remember for any of this we need our suitable source to charge a cap ..


    then we need a job for that energy to do ... but without our cheep source of energy we can dream all we want .... but thats it is a dream ..

    this is why the aa and nst ..

    its ma G

    W

    my G makes dreams come true !
    Resident Deejays---Master of Dreams - YouTube
    Last edited by willy96; 11-11-2011, 01:24 AM.

    Leave a comment:


  • willy96
    replied
    you know i can keep talking of many ways SILVER IRON AND COPPER can be used with VOP

    like for instance ...

    iron from source to limit flow ... spark gap as its a broadcast point and a point of eather interaction connect to copper .. we gain speed via gap from eather as i just explained so

    say it left source at 20%vop to gap hits 100% enters copper at 60% we at gap have over spew rf noise ... tap it there ..... signal leaves copper to antenna goes from 60% to 100% it is now in free space .. reciever is say 90 % we harvest!


    and the bulbs glow ...

    W

    Leave a comment:


  • willy96
    replied
    Originally posted by willy96 View Post
    silver is desired for best conductivity . lowest losses cheepest of all pm's

    all i have said is easly proven true .. via VOP

    so if on the reciever all wires were silver and tuned to a certain freq .. i would eapect so see extream results tranmisitter could be copper and iron.... max speed is say 60 % vop then iron is slower whatever the speed ... the excess between the 2 is over flow used to self sustain the transmitter ..

    current could easly be made more by adding additonal rings .. to the stack

    sounds so TPU

    dont it ...

    W
    so to visualize i will atempt a crude text art ....


    000000000000000000000 current ring #3
    000000000000000000000 current ring #2
    000000000000000000000 current ring #1
    0000000000000000 feedback self sustain ring

    transmitter
    ali coil

    harddriveplatter harddriveplatter

    speeker magnet


    now squish it ...

    W

    Leave a comment:


  • ralphwinkle
    replied
    Originally posted by RAMSET View Post
    Gordon thats uncanny
    The Coil in the water and the Turtle!??

    Thanks
    Chet
    *Sigh

    Its not a turtle...its a Scarab Beetle....ancient Egyptian

    Leave a comment:


  • RAMSET
    replied
    Goose bumps

    Gordon thats uncanny
    The Coil in the water and the Turtle!??

    Thanks
    Chet

    Leave a comment:


  • willy96
    replied
    silver and the magic

    silver is desired for best conductivity . lowest losses cheepest of all pm's

    all i have said is easly proven true .. via VOP

    so if on the reciever all wires were silver and tuned to a certain freq .. i would eapect so see extream results tranmisitter could be copper and iron.... max speed is say 60 % vop then iron is slower whatever the speed ... the excess between the 2 is over flow used to self sustain the transmitter ..

    current could easly be made more by adding additonal rings .. to the stack

    sounds so TPU

    dont it ...

    W

    Leave a comment:


  • willy96
    replied
    Vop Here We Go

    VOP

    i will now atemp to explain overunity and a supper simple way of acheiving it !

    this is deep and child simple all at once ...

    so what hapins when you run out of wire ...? you send a signal a pulse down a wire the end is open its a bradcasting point when the signal reaches the end of the wire exactally what takes place ... ?


    ok vop is the speed the signal is sent .. so if the wire was copper it takes "X" amount of time to travel

    when we look at radio waves and eather broadcasting .. all is based upon the speed of the eather or the speed of electricty in free space the mesurement system vop is based on the speed of light in free space ..

    so what im saying it simply put is this ... if at max speed for copper a signal is sent say its 60% vop the speed of light ... when that signal exits the anttenna it will gain in speed..
    hear that ? maybe this IT WILL GAIN IN SPEED !!!!!!! TO MATCH TRAVEL SPEED OF THE NEW MEDIUM IT NOW TRAVELS ...

    now we sent at 60% half way through tranmission its 100% radio wave in free space .... so we have gained 40% of sum for free so now on the other end where you like to recieve the package you sent if you could harvest the sent item at 90% vop via a conductor you have a much larger gain on recieving end ..

    this is simply put and constructed by diffrent metals ...

    to allow yourself access to a higher energy this device is not designed to run 1/4 res... this takes another aproch to tapping energy that is free

    simply by understanding VOP


    W

    Leave a comment:


  • willy96
    replied


    looks great ...


    hope your ready tanks full agin ....

    W

    Leave a comment:


  • MonsieurM
    replied
    I wanted to post this along Dave's Picture :


    caduceus air core






    Nothing is at random Fellow Telestai

    Last edited by MonsieurM; 11-10-2011, 10:56 PM.

    Leave a comment:


  • willy96
    replied
    Originally posted by RAMSET View Post
    Willy
    We are playing with AC and Alum/stainless Tubes in the water on The Davey thread
    When Gordon Posted that I felt it had relevance but I don't understand yet How??

    Have you played with AC Coils and water??

    I also want to Try Gordons Caudasious coil and Quartz in the water?

    Thanks
    Chet
    ac and water nope .. i have not played hho in years .. but i will agin messed with electrolisis with the PM's other than that left it alone ..

    well we can figure it out in no time .. yes Gordan has made many good points !

    freezing a ringing crystal should prove intresting ..

    W

    Leave a comment:

Working...
X