TUBE DRIVEN TPU'S The construction zone

[willy96]

Yes yes i want to see it without the ferrite.
Why?
Because it is too noisy all of those barkhausen slapping crackling magnetic domains nope it's not the way if you want crystal clear reception
Try without the ferrite and it will amaze you to see how clear things actually can be !

i have a few plastic rings like rodin uses but i dont have much more silver wire around .. but i will figure something out

W

just hold a blub .. then and it will lite .. no wires

[Marcoz]

Yes

Yes yes i want to see it without the ferrite.
Why?
Because it is too noisy all of those barkhausen slapping crackling magnetic domains nope it's not the way if you want crystal clear reception
Try without the ferrite and it will amaze you to see how clear things actually can be !

[willy96]

now that i have wound the coil and explained it im gonna work on it today might mount it and make some spark gaps .. and get ready to test it and shoot some

hd wide screen

lol

W

[willy96]

is this real or is this pretend ........?


you decide ...

ALI 616

W
ALI 616 TPU CONSTRUCTION PART 1 - YouTube
ALI 616 TPU CONSTRUCTION PART 2 - YouTube

like it ? it could with a few mods be an arc reactor

what is it ? i dont know .. looks like the foot hills .. the hills ? to the head lands ...
lol

Lucy in the Sky with Diamonds (The Beatles) - YouTube

i have stood in 3d at the foot hills to the head lands .. i could post pictures that blow your mind .. but i wont ! just you know i know where that is ...

carry on lad carry on ... certianlly was carring on .... lmfao

[willy96]

i have ran my arc reactor .. and burnt carbon rods ..

IST! NEO ZAP RED HOT CARBON ELECTRODE - YouTube
i have other reactors too but i care not to speek of them ..

saftey issues ! and you dont need it ! anyways!

i dont even want to talk about the yoke / toroide coils i have made i have over 400 coils on feroite! all diffrent!

that yoke will work just fine .. i have many coils like this one a side the tri metals ..

W

and marco would probally like to see it without the feroite core i put it on feroite .. not because it wont work ... but because i dont want to make a mess where i live .. considering im verry close to a top secret military base .... d.o.d. comm at that .. so why piss em off ?

im a 1 stop shop with a real big ---- i make those panties drop
Christina Aguilera - Candyman HD WIDESCREEN - YouTube

[Marcoz]

nope

Nope jay i'm sorry i can't show them working.
I mean i can if i really want to but i stopped working on those projects and i am working on others now.
And i never did Steampunk Gadgets (besides one guitar) but i am going to !!

Willy you did not jump on the crappy Yoke wagon did you?
Those guy's are the real players they take a yoke and attach some wires and pretend they got something.
Try not to get distracted by them and go your own way remember.

[arKzeRo]

hey could you guys show your arc reactors working? What are they? the only info i can find is that they are the thing in Ironmans chest lol

or are you guys joking?

Oh and Marcoz exellent workmanship! have you ever done any steampunk gadgets?

Best regards - jay

[willy96]

in this picture if you have a good look you see...

2 secondaries all wound the same dirrection 3 groups of 25 turn 180 deg apart .. this was done for ease of winding .. thats 75 turns each ... now i have showen i can get over 20vdc per turn in a previous video .. so there lots of turns ... for high voltage ..

also this will be much higher amprage .. as im gonna supply a bit to it .. but i have inceased the freq of the device ie the multi lap so 1 pluse it goes round twice the same wire .. and repets 4 more laps for a total of 6 laps per single pulse and is intrupted 2 times after the initial pulse

W

[willy96]

i just got 12 diamonds in a white gold ring wow !

i wore it not long 3 hours ... and boom! boooyah here ya go !

this is how i became what i am !

W'S TRI METAL FERROITE SPINNER
ok so i have already half built this ...



i shall explain this device now!

ok metals are copper insulated iron wire insulated silver un insultated.. the 3 metal wires are placed iron silver copper thease 3 wires are trifillar wound around a feroite core .. in a multi revelution configuration after copper secondaries are wound 180 deg secondaries .. to one another

i would split 3 turns per revelution .
so what happins is power first goes round and round iron wire... out iron wire to a spark gap from gap to silver wire then round and round .. out of silver to spark gap to copper wire ... round and round ... out to neg supply connection or lite blub on supply side then to neg..

so on the iron wire input side goes a laptop adapter 19vdc 4 amp to my neo zap ..

this is scary now !

not even a transistor aside supply witch is dumping a cap ... rapid fire ..




W

there is some true magic people !

any idea how wild this is .... it is TOTALLY WICKET WILD ... ill tell ya why .. first freoite can handle extream high speed ... second i can place as many outputs as i desire to viturally verry hv ...

iron when powered electricty .. via a neo magnet and spark gap .. producess extream magnetic feilds and magnetic currents .. as well it cosumes lees than copper as the resistance is higher.. therefore limiting source energy.. placeing iron as the first metal to be used .. in this aspect.. next is silver for the simple reason we want to harvest VIA V.O.P. as i have previsouly spoke of .. this takes place at spark gap via eather boost . BUT!!!! NOW WE ALSO WANT TO HARVEST THE ALREADY POWERFULL MAGNETIC CURRENTS .. AND CONVERT IT TO THE ALREADY SPINNING MAGNETICS IN THE CORE .. this should best be suited silver wire this places silver as #2 wire .. now we are trying to slow down the silver energy as its faster than copper to do this we want a bottle neck .. meaning at the last gap we have a copper contact or brass .. and feed all this wild energy through the copper wire .. makeing a additonal powerfull electromagnetic feild.. adding to the wicketly wild rotating magnetic mess we already have ...



sounds just nuts!

the girls call me CANDYMAN!
HERE YA GO A REFRESHER OF MY NEO ZAP .. 60WATT LITE BLUB!
IST NEO ZAP AT WORK - YouTube

external magnetic feild .. with neo
NEO JT RING FRYS ADAPTOR - YouTube
World's Loudest Alarm Clock! - YouTube

[willy96]

Looking good W here are mine's

i know where you stand bro no worries

they are verry nice to be expected from my BRO!

W

[Marcoz]

Looking good W !

Looking good W here are mine's

[willy96]

Ist 814 Arc Reactor!

Here Is My Arc Reactor ...

Just Incase You Thought I Never Built One B4 ... Lmfao


W

[Marcoz]

sounds good

Hello Willy, I have mad respect for you and what you are doing; I have been watching your vid's for a couple of years now, but after the "TPU exposed" I some how lost track of you. I am just a newbie to all this, but I have been building a few coils from Marco Rodin,Jamie B.,Mike Powers and been trying to understand it all, when I realized that "I didn't know alot about circuits"lol,but I am learning,your vid's helped alot. I have also done some research into gold,platinum,rhodium and have come across,monatomics and various aspects of chemistry, a quick question,if possible........."could the QUALITY of the materials of the TPU have a direct connection with it's operation..?" I hope I haven't crossed any lines here, again "NEWBIE" The TPU will be a staple in history...! I believe that there are many people all trying to get to the same place; it is just that they all have different ways of getting there...! Stay True Stay You...!

You need to start with something measurable and work it up from there.
Don't just build coils that look like it and hope it will work coz it won't.
Start with the smallest measurable thingy and work it up making new measurements then change some small factor and make measurements again.
THen compare the results and look for changes.
If you find them they will lead the way trust me.

[willy96]

I see you got credit for it too
wiley who
I never heard of him, you naaaaaaaaa

i got to where i am with junk and a lot of work ..

and you .. well the facts are the facts ...

your stranded on 1 of my little islands ..


look innovation island ...
IBM Innovation Island - YouTube
i need not worrie about makeing money i do what i love and the money will come if it was suspoto and aperently it is if IBM is makeing jokes and comericials dirrected at me ... and clearly they are ...
i guess they understand what it is you dont davy !
just what i see .... anyway!

[Dave45]

I see you got credit for it too
wiley who
I never heard of him, you naaaaaaaaa