TUBE DRIVEN TPU'S The construction zone

[soundiceuk]

I also believe it will glow with the right voltage and frequency. It definately draws more energy in because the spark difference is big. Might try a metal halide too.

[willy96]

I've been experimenting with Imhotep's Radiant Oscillator Lite and spark gaps. Out of curiousity I swapped the CFL with a Sunmaster Dual Spectrum 600 watt high pressure sodium bulb.

The spark went mental compared to the CFL and there was plasma lightning inside the bulb.

welcome my friend

i been useing 400w hps im a go inda glo lol i may have a few bulbs around ..

now i think you just need the right freq and she shall glow !
being you have hps .. perhaps you try my plant growth accelerator .. its some fun... make it rain im makeing it snow! aint the same when its up that close ... saclar spin vortexes!

W

GREEN 2GO - YouTube

try dropping some chips of clear quartz in your rooting medium.. enjoy! btw i attacked organic hydrophonics just the same as i attacked free energy ... but i aint giveing it away ... sorry i have a forumila that will provide exactally what plants need ... eat a tomato maybe it changes your dna ...

[willy96]

and jo you best stop ... you will watch GOLD CARSH!

and silver REPLACE IT ..

wanna know why?

YOU GOT VOPED!

W

I warned you prior to me voping you !

[soundiceuk]

As for the Tesla free energy device, I'm actually beginning to believe that the vacuum tubes were used for the vacuum and they were spark firing gap devices harnessing the radiant energy from the vacuum. I'd imagine it to be completely plausible... But then Steven Mark apparently did it with transistors, so maybe it is all about frequency?

I've been experimenting with Imhotep's Radiant Oscillator Lite and spark gaps. Out of curiousity I swapped the CFL with a Sunmaster Dual Spectrum 600 watt high pressure sodium bulb.

The spark went mental compared to the CFL and there was plasma lightning inside the bulb.

[willy96]

i dont know who cant get what to work but this one apears to work quite well EVEN on a aa battery ... yikes..

G6 CLOSED LOOP RF RECHARGE LOW VOLT - YouTube

W

ps joey ! you realize that if i let that deaccelerator unwinde 2 more khz .. i strike resosonance for that core .. joey ..

no crying on stage jo!

yawn old news ... but what does it all mean ? well it means im the person that made this your reality !

you really want to know how this is teslas .. you can look at that last video and imagine the operation of that showen device the G6 as a freq genny sweeping a low khz freq band and self tuneing the coil when core resosance is met and wires are tuned for that wave length .. imagine the fire it will piss

this is so much like PLH that it is easly understood! just like useing the POWER lines to ring teslas conductors till the wave goes into a 3.333_ loop then maybe 2 more plh's 1 at 6.666_ and maybe 1 a 9.999_ think it will make a high speed rotating magnetic vortex that is harvested via regular generator properties ?

ya think?

[willy96]

farmhand

i did not answer your questions because you dumped about 15 questions on me instantally so i let it go besides its not my job to adress the questions you have i answered my questions by pratical expairmentation ..

KO KO JO i just cant be be bothered to even respond to the cridder ..

ko jo just wants a floating power station so he can try and control the world .. good luck jo

clearly jo has VESTED INTREST IN THE TPU! or it would be no biggie as i speek of it the closer we get to the truth about the device the more jo bounces in his chair! and the larger joes pictures get .. jo i can see your getting excited ! by the way your conducting yourself .. you do realize jo my work wont change what i have exposed public will remain mine ... from the day i exposed it till the day the world ends .. so the sooner you understand that the better off you will be !



jo i think there gonna take you for a tour ... maybe rewrite your brain btw jo we are ALIENS! each and everyone of us its the GAME we all play it the same .. its the game ....

im standing on my toes ... iv been doing my thing iv been running my game and you know i wont look back ...
Alyssa Reid - The Game - OFFICIAL - YouTube


W

[Kokomoj0]

My questions were valid
Regards

They were absolutely valid and anyone with a functioning brain would ask the same questions before committing themselves to build anything.

I have not considered building a tpu for even 1 second, and all these joule thieves are really choppers operating near or at resonance, very similar to my electronic ignition design in the late 70's. Choppers can work well for lighting with pulsed input because of the decay time, but you wont turn a motor. [not with a tpu design] (scams excepted)

These tpus, are nothing more than a glorified transformer and there is no over unity, which is not say that its "impossible" to get "some", but not in any of their designs.

That and these tpu and smith proponents were to walk into any well established company talking like they do here, they would bounced out the door the second they opened their mouths.

These guys, especially these militant tpu people, dont even know how to measure their circuits because everyone knows or should know that their circuits run on magic.

Its your fault for asking the question not theirs for failing to answer. Thats how pseudo-science works. (or more accurately doesnt work)

Dont let em get to you, take notice that the person who said that crap is just another marks sock puppet.

[Kokomoj0]

welcome my brother ...


yes TUBES IT IS AND IM ON THEM ... LIKE A FAT KID ON A SMARTY!


ko ko jo got KO ed! yes he got me wandering ... but for sure my old toys are old news my new toys are tommorows news!


lol

marco you gotts tubes ?


W

Dont break your back patting yourself so hard.

You should be more careful because you dont know who you are talking with out here.

You keep drinking that stuff and you are likely to completely rot your brain.



So you are the one that started that tpu loonacy then huh?

You cant even tell us what you have or the corresponding theory because you cant even explain how it works.

They call that throwing sht at the wall and hoping something sticks.

You couldnt get it to work with fets and xisitors and now you think tubes are the answer.

You cannot tell us why, and yes I watched about 3 minutes of the 3 videos you posted any more would have put me to sleep.

Have you considered going to school? 1 week in an elementary electronic school you would be well spent and you would stop looking like such a fool out here.

[Farmhand]

The hypocrisy is overwhelming. Where does it state that the OP is required to answer your questions to your liking? Is he your servant? When he said god, he might've been mistake, or not. Surely you would be happy to know that you are a god here while on earth. As for him not attempting to answer your genuine and valid questions is not rude and ignorant. Show a little patience and you may find what you seek. Humility is the key to understanding. Give him a chance. If you like correcting others, then maybe you should learn the proper use of the contraction 'you're'. It replaces you are. When it doesn't, you simply use 'your'.

Come now children, let's all get along with eachother

As for the Tesla free energy device, I'm actually beginning to believe that the vacuum tubes were used for the vacuum and they were spark firing gap devices harnessing the radiant energy from the vacuum. I'd imagine it to be completely plausible... But then Steven Mark apparently did it with transistors, so maybe it is all about frequency?

My questions were valid and when i said I expected an answer I meant it as in
the way anyone would expect an answer to a valid question. I did not mean it
as I "expect" an answer, as in he "must" answer me. Obviously the wrong
conclusion was jumped to and acted on without the chance for me to clear up
what I said or meant.

I didn't mean it like that at all, all I meant was he ignored my questions then "advised" me to chill,
I then replied saying I don't need his advice, I never asked for "advice" by the
way, and that i don't need to chill. I then asked if he was going to answer the
questions.

Then willy96 replied by saying I must be God to "EXPECT AN ANSWER" and
declared that I better find my own answers because he don't spoon feed
anyone. When I never asked for anything but an answer to my questions, and
I certainly didn't want any detailed information or to be spoon fed anything. If
he had just said he didn't want to answer the questions fair enough. I think it
is totally normal to expect an answer to a valid question. Or at least some
response to the questions.

As for you, fancy referring me a child, I'm not the one insulting people and
calling them names. I didn't ask for advice or to be spoon fed or to be verbally
abused. Thanks for correcting my grammer, I'll remember that tip.

I have another question for willy. What happens when you're tapping power
line harmonics and the power transmission in the HV lines stops do you still
get power? Feel free to completely ignore the question and call me a silly
name or wrongly infer I want you to teach me something, or whatever.

I won't be having a big argument here about this I only replied because you
addressed me and quoted me.

Regards

[Kokomoj0]

The hypocrisy is overwhelming.

yes it is isnt it.

[jtanguay]

I doubt you are well enough adept at spoon use to spoon feeding anyone
you're self included.

I didn't ask you to bow to anyone and don't expect that from anyone.

You stating I must be god because I ask questions, is to me, is an indication of
you're complete lack of respect, God should be spelled with a capital G at
least. The width of you're wings are of no interest to me and actually should
be referred to as a "wing span". Not attempting to answer a genuine and valid
question is nothing but rude and ignorant.

Carry on with you're TPU building it will be nothing more than an idol to the
cult leader Steve Marks. OR is it going to be a totally different device, a
transformer perhaps.

..

The hypocrisy is overwhelming. Where does it state that the OP is required to answer your questions to your liking? Is he your servant? When he said god, he might've been mistake, or not. Surely you would be happy to know that you are a god here while on earth. As for him not attempting to answer your genuine and valid questions is not rude and ignorant. Show a little patience and you may find what you seek. Humility is the key to understanding. Give him a chance. If you like correcting others, then maybe you should learn the proper use of the contraction 'you're'. It replaces you are. When it doesn't, you simply use 'your'.

Come now children, let's all get along with eachother

As for the Tesla free energy device, I'm actually beginning to believe that the vacuum tubes were used for the vacuum and they were spark firing gap devices harnessing the radiant energy from the vacuum. I'd imagine it to be completely plausible... But then Steven Mark apparently did it with transistors, so maybe it is all about frequency?

[willy96]

i missed ya man !

Have you seen any tubes in the 0.8Kv biggy?
I'd say that **** don't fit !!
The master switched to solid state the moment he could grab it.

Didn't you guy's read the APPLICATION INFORMATION in that TEA5101B spec sheet?



I'd say ive read that before...
Something to do with humidity, orange cap's grounding out unwanted **** and 100 weavy lines in the soup where only one is desired.
That puppy go up to 10Mhz bro !!

Who needs tubes?
He only used that **** cos this puppy wasn't available at the time....
Soup anyone ?

soup's on M is cooking !

wanna build it public? LMAO!

W

PERHAPS BRO WE NEED A PICTURE OF THE BIGGIE TO PERK SOME INTREST

maybe the video too now that toy piss fire !
isint that the one he was popping those 100 amp fuses with M?

im wondering now if that chip can handle an emp burst ? because if it cant ... that aint good would hate to have to keep replaceing the chip

however we may be able to portect it by means of placement ... kinda like how a gyro makes a torri maybe the tpu makes a bubble .... lol

[Marcoz]

it ain't a tube

Have you seen any tubes in the 0.8Kv biggy?
I'd say that **** don't fit !!
The master switched to solid state the moment he could grab it.

Didn't you guy's read the APPLICATION INFORMATION in that TEA5101B spec sheet?

PC BOARD LAYOUT
The best performances of the high voltage video
amplifier will be obtained only with a carefully desi-
gned PC board. Output to input capacitances are
of particular importance.
For a single amplifier, the input-output capaci-
tance, in parallel with the relatively high feedback
resis-tance, creates a pole in the closed-loop trans-
fer function. A low parasitic capacitance (0.3pF)
feedbackresistor and HF isolated printed wires are
necessary. Further more, capacitive coupling from
the output of an amplifier toward the input of an-
other one may induce excessive crosstalk.

I'd say ive read that before...
Something to do with humidity, orange cap's grounding out unwanted **** and 100 weavy lines in the soup where only one is desired.
That puppy go up to 10Mhz bro !!

Who needs tubes?
He only used that **** cos this puppy wasn't available at the time....
Soup anyone ?

[willy96]

Havent seen him in a while "W"

Got what he wanted I guess ? He's a good guy but gets "Testy" sometimes??

So yah got any new movies??
How about a power in power out quote:?? [just to wet the appetite?]
THX
Chet

it has been some time since marco and i have played tubes i do like marco he a smart cookie ! its the plh and tubes that beings M back out to play .. and i can not blame him 1 bit

no new videos yet but soon! first one we gonna shoot is standing under the power lines holding a lit florescient bulb in our hands no wires ...

from there i guess we gonna see where it goes ..

i would love for marco and anyone else that has a passion for tubes to shoot a few videos too !

cuz its the U BEEN TUBED SERRIES up next!
catch it on your loco YOUTUBE!


W

[willy96]

i could not find the speck sheet for that tube but i found the transistor ver ... high voltage video amp r g b i really would like the new 4 colour unit that could be fun ....

but the 369 jobbie will do the trick ... we go 4 colour when we want to fly ... right now power is all we desire

marcoz if you could post a speck sheet and pin out ill buy that tube !

i have about 7 6bq7a's now the dual triodes but i do not have this tube reason being the tv's i had access to probally were only b&w

so im not afarid to play my toys ! but i have been at this a while ... and this is not reccomended for beguiners .. hence why tubes have not been played public much .. its your life handle it with care ..

tubes can kill ! be aware

W