Peter Daysh Davey Water Heater Query

[MonsieurM]

Gordon
If you post a bit more I will Do a replication

Tonight!!!

I'm chompin at the bit over here!!



Thx
Chet

What do you need to know, i'll help if i can ....just let me know

U need two well insulated copper wires of a good length (say six feet each...trying to stay within the harmonic math range six feet = 1.8288 meters )

use the link above to make a mobius coil : Mobius Coil Tutorial

then wrap around whatever you desire the first mobius wire in Caduceus Manner



and the second mobius wire should be coiled 180 degrees (or opposite )of the first coil

[PhysicsProf]

Gordon
If you post a bit more I will Do a replication

Tonight!!!

I'm chompin at the bit over here!!
....

Thx
Chet

I agree! although the build will take a few days in my case. Also, Gordon, have you done any Power-out / Power-in measurements?
I see that you posted just as I was writing... puts us almost in synch I should say.

(Note: today is busy with family here, but will try to keep up.
@DB -- thanks for the updates -- and MORE POWER TO YOU!)

[MonsieurM]

here is a vid on how to make a mobius wire; it is in the first minutes of the vid

Mobius Coil, Crystal Orgone Orgonite - YouTube

[MonsieurM]

I agree! although the build will take a few days in my case. Also, Gordon, have you done any Power-out / Power-in measurements?
I see that you posted just as I was writing... puts us almost in synch I should say.

(Note: today is busy with family here, but will try to keep up.
@DB -- thanks for the updates -- and MORE POWER TO YOU!)

sorry Professor ...this is within your range guys not mine...this was a test i ran a while back ...you know how it goes...what if i did this what would happen....oh look bubbles

the design, i hope is simple enough to be replicated...took me about 1 hour to complete...the hard part is coiling the wire because they are a bit stiff...that is all

Synchronicity has been a good companion in this research


worth noting, while running the experiment a slight buzzing was heard...

if it was shorted it would have blown a fuse, just in case you are wondering

[RAMSET]

Gordon
That says 4/10mm wire
Is that 4 pieces of 10 mm wire [Huge]?
Or 4 strands totaling 10MM?
Or 4 Gauge stranded??

Whats this "Enameled Wire""?? Enamel like Glass?? or just a generic term for insulated wire?

Also ,am I hooking it up the same as the boiler
One wire Hot
One wire Neutral
?
Cardboard tube in Water ?? [I hate Cardboard tubes in water]

What to use for Ferrite /
Welding rod ??
Suggestions.........
THx
Chet
PS
Professor
I will be doing a baseline and then device test Calorimetry! {otherwise it wouldn't be any Fun]

[daemonbart]

Superheat!

Hi,

well my small bubbles travel about 50 cm to surface of water and dont condensate, water is about 60 deg C.

I have lid on tank and only small leak, still loosing 20l in 24h .

Under pressure of about 1 bar we can avoid this .

Today testing 48V DC 1 amp, no pulsing or anything.. My device seem to start resonating on its own. I have heat and hydrogen

Only tapwater, water look like fog, you fellas with hydro experience, what does the size of the bubbles tell?

When I ignite it seem to implode and sounds like pistol shot..?

Kind rgds D

[MonsieurM]

Gordon
That says 4/10mm wire
Is that 4 pieces of 10 mm wire [Huge]?
Or 4 strands totaling 10MM?
Or 4 Gauge stranded??

Also ,am I hooking it up the same as the boiler
One wire Hot
One wire Neutral
?
Cardboard tube in Water ?? [I hate Cardboard tubes in water]

What to use for Ferrite /
Welding rod ??
Suggestions.........
THx
Chet
PS
Professor
I will be doing a baseline and device test Calorimetry! {otherwise it wouldn't be any Fun]

Take two wires, i used wires with standard gauge as you can see in the picture ,usually used for transformers and did the operation described above

if you have access to a test tube and a large cup of glass (of course this is for testing the replication ) ...coil the 2 Mobius wires as described to the test tube ...once done you end up with 4 wires as shown in the picture....take a lamp cable connect one end to red wire and the other end to orange wire.... this part i cannot say for sure which went where but you take the last two loose ends...one goes in the test tube....the other in the glass...

replace core with test tubea single coil overlapping coils

[daemonbart]

Ferrite?

Hi,

when running some setups with ferrite parts I had sparks shooting holes in ferrite, ferrite was 15mm thickness, also shortcuts and blowing fuses

Kind rgds D

What to use for Ferrite /
Welding rod ??
Suggestions.........
THx
Chet
PS
Professor
I will be doing a baseline and then device test Calorimetry! {otherwise it wouldn't be any Fun]

[MonsieurM]

pure speculation using ferrite

If you are going to test with ferrite core I would recommend having the ferrite covered with electric insulation (you want dielectric and diamagnetic) before plunging it in water....one of the two mobius wires end has to be connected to the ferrite while the other to the water

just in case you need to know, I'm on 60hz 220 V

[RAMSET]

Just Got a bunch to do..............

Scuttled todays plans a bit,I just got loaded with work !
Gordon ,I will have to study your info a bit more?
Thanks
Chet

[MonsieurM]

It's cool Ramset...I just hope it is clear enough for you to reproduce...

Btw: there is a 404 on the vid i posted....i hope it is just technical problems....but really when you do guys replicate share your results

ps: time to back up....pdf print this thread

[daemonbart]

Hydrogen?

Hello,

seem to me that we are close to several things here! As very new in OU theorys I must have been very lucky to meet you guys and ladies ?, mrs DB also very helpful to me in my work especially with calculations

Maybe we will enjoy selfrunning OU before 2012

Todays lab setup limited to 50-100 W input only, gives me a lot of hope

All collected experience from you veterans will be needed, I think you have been very close in the past

Kind rgds D

Hi Daemonbart,

It sounds like you are getting a lot of atomic hydrogen. When ignited, it's a lot louder than the monatomic hydrogen. The atomic hydrogen is also much more powerful and useful than the monatomic. It takes less of the atomic hydrogen to run something. The atomic hydrogen is the most unstable and will return to either water or monatomic quickly, so other researchers have found ways to join it at the atomic phase with nitrogen and create ammonia which is very stable and makes a great fuel. It was used by the Germans in WWII and is still used today in black-op projects in UK & US. This is a highly protected area!!! I have copious notes on how to do this though. I will try to find them for you. It's been a while since I saw those notes, but I know I archived them well about four years ago.

This is very exciting information indeed. Thanks for sharing it.

Best Regards,
Slovenia

[RAMSET]

A nice Vid about Resonance

Resonance The Truth - YouTube

Chet

[PhysicsProf]

Resonance The Truth - YouTube

Chet

Family is wonderful-- what a great day! I want my grand-kids to have "free" energy!

I enjoyed the vid Chet -- who is the guy who did it? (he said remember who told you about this.)
It reminds me of the resonance work of Armagdn03.

This guy says that he has NO power flowing into the circuit from the frequency generator (because there is no ground wire) -- but I don't necessarily believe that. Remember I'm from Missouri. So I'd like to see some measure of the current or power flowing through that wire from the frequency generator. Only if you MEASURE the input can you say its zero power in. IMO.

[RAMSET]

Grand Kids Are wonderful

Professor
Yes ,Its good to reconnect ,Love is a very powerful Thing
So much of My time seems to get caught up in the everyday Panics of life these days?

And Then I saw Her [My Granddaughter] ZAP............
She Zaps Me .... I don't know how she does it ?? But I thank God for her
And for her Love .... {she's 3 Months old].

Good stuff...

Motivation!!!

The fellow that posted that vid has not commented any further .
It was Brought to my attention By Tinsel Koala a very aggressive and Knowledgeable Over Unity Scientist ,Who has helped many times in the past!
The vid is from Here

Resonate Energy Tesla



Anxious in NY
Chet