3D electromagnetic field

[Michael John Nunnerley]

Great video

I think you will find this video posted earlier to be absolutely relevant, very entertaining, and quite important.

The Primer Fields Part 1 - YouTube

While its not new, (it has been explored in the work of Walter Russell, The Alchemanual, and other "in the know" sources) it is a very interesting validation and visualization. WOW.

Great video

Isn't it a shame that the only scientists that are listened to are the main stream ones and it takes billions of dollars to be spent before it can even be considered, it is like your entrance fee to the club

Thanks Andrew for sending me this and posting it here, I had not seen it.

regards

Mike

[Armagdn03]

I think you will find this video posted earlier to be absolutely relevant, very entertaining, and quite important.

The Primer Fields Part 1 - YouTube

While its not new, (it has been explored in the work of Walter Russell, The Alchemanual, and other "in the know" sources) it is a very interesting validation and visualization. WOW.

[superman9976]

Hey Mike

Hey Mike sorry to hear about you son. I will purchase one of the vids from Aaron to help you with some fund raising.
I am wondering if you ever messed with these toroids of meyer design. Have you seen them? I never knew what these looked like until recently.
Why are we not talking about these? How they work, how to build, this is what we are all after.

pics available here:

Index of /rwg42985/russ

Under stanley meyers epg high quality pics

Chris

[vrand]

You can say that again

Marcus HOLLINGSHEAD

Anti-Gravity System

Where can I buy one?! "Build it and they will come"

2011 Interview Youtube:

Marcus Hollingshead interviewed by American Antigravity on the Searl Effect
Marcus Hollingshead interviewed by American Antigravity on the Searl Effect - YouTube



Cheers Mike

From that interview back in Jan. 2011
- The AG device has moved to "solid state" in the last year. No more 6 rings mechanically spinning around the center mass.
- Lifting tons of weight now.
- In 6-12 months going public.
- After 9 years before public can "buy one," due to politics. This is due to the many "existing industries" that would be replaced by this new technology.
- New atomic theory. Future college students will be taught in this new atomic physics and new industries.

God willing, I might still be alive when we have the "Jetsons" flying cars!



Cheers Mike

[MonsieurM]

Could be you just have to figure out how to pull energy from the system unless it lifts off

simple once the ball inside the egg reached the right rpm, the system will start producing an excess of energy (no external input needed ) the internal interaction will take over that could be fed back to the Tesla coil...remember if an antenna can emit , it can also receive (prinicple of polarity )


and guess what, Rodin Coil was considered an amazing Antenna by the military

[vrand]

Could be you just have to figure out how to pull energy from the system unless it lifts off

You can say that again

Marcus HOLLINGSHEAD

Anti-Gravity System

Where can I buy one?! "Build it and they will come"

2011 Interview Youtube:

Marcus Hollingshead interviewed by American Antigravity on the Searl Effect
Marcus Hollingshead interviewed by American Antigravity on the Searl Effect - YouTube



Cheers Mike

[vrand]

Excess energy is there all the time.
Just look at the heavyside component even in a straight wire.
You can "extract" excess energy with a simple coil with the right set-up already.
The "EH antenna" concept used in a generator looks promising at first sight because it looks like it is not reflecting back to the source, which is a condition for getting excess energy out.
What i find problematic is that a rotating magnet does not cause magnetic waves by itself , but rather a torsional field. So the "antenna" concept might not apply for the generator.

As far as I know Tom Bearden's MEG, and his Heaviside and Poynting's theories, have never worked out to extract free energy from the ambient environment. Unless I am mistaken, where can one buy a unit to power their house electrical 5-10kw loads?

Don Smith's work looks promising and on another thread here a poster "zilano" claims to power their house with their 10kw generator. I am pursuing that avenue of research as it is just a "reverse Tesla Coil" design. I posted the design plans here:

http://www.energeticforum.com/attach...esign-doc-.pdf


As far as this EH antenna design to a Bedini magnetic rotor/coil stator design I do not know how it would interact with a magnet rotor to coils configuration. Mike seems to think that there is something there. Maybe. One would need to do the experiment.

What was also interesting in the EH design, besides not needing a spark gap, was that it looked really close to the secondary bifilar coils with center tap, but instead was a solid piece of copper tube, vs wound coils of wire.

The EH people are calling this new magnetic component HZ while others have called it "cold electricity", Tesla longitudinal electric wave, "ambient energy" etc...

More experiments need to be done.

Cheers Mike

[Dave45]

so you have solid rings that create a a spherical field

what if i told you this is what happens inside the Tesla copper egg with the crystal inside (see http://www.energeticforum.com/renewa...gnetism-9.html )

a spinning solid sphere that creates the emf rings

a 2d version

Could be you just have to figure out how to pull energy from the system unless it lifts off

[MonsieurM]

so you have solid rings that create a a spherical field

what if i told you this is what happens inside the Tesla copper egg with the crystal inside (see http://www.energeticforum.com/renewa...gnetism-9.html )

a spinning solid sphere that creates the emf rings

a 2d version

[Dave45]

Great read I especially liked this quote,

There are some things that you have to keep an eye out for, such as icing up of the rp - but I hope to correct that by heating the outer shell as per a suggestion by Colin.

This is what we have to find when we do find it, it will power itself.

[MonsieurM]

Marcus HOLLINGSHEAD

Anti-Gravity System

Marcus Hollingshead

The configuration of the devices #161 and #162 (generically known to Hollingshead as "bob") was six rings arranged in three pairs, each interlinked pair slightly offset from each other and centered around one of three axes: X, Y or Z. The rings in each pair were counter-rotated at 4200 rpm. Rings were wound with wire in a bifilar/caduceus manner. Twelve stubs, coil-wound short lengths of rods with flat points, were attached to the inner circumference of each ring and pointed inward.

Hollingshead posted that if all the rings are powered and spun in balance there is no net movement of the device. However, a spherical field would form around it, noticeably darkening and blurring the contained zone to a point where the RP is no longer distinguishable and producing a shell coronal effect (purple/violet) in the dark (nazi bell) . This field was one of the first non-propulsive "HAFF" fields produced by the device. It has been suggested but not verified that the acronym HAFF may stand for Hollingshead Anomalous Force Fields, of which Hollingshead reports there are seven.

[Michael John Nunnerley]

Excess energy is there all the time.
Just look at the heavyside component even in a straight wire.
You can "extract" excess energy with a simple coil with the right set-up already.
The "EH antenna" concept used in a generator looks promising at first sight because it looks like it is not reflecting back to the source, which is a condition for getting excess energy out.
What i find problematic is that a rotating magnet does not cause magnetic waves by itself , but rather a torsional field. So the "antenna" concept might not apply for the generator.

What is this?

Centraflow - oaugdp3 - PhotoShack.com - Photos Live Here.

Forget the antenna use, this is a coil wound as I have been trying to explain, what you see is a dialectric barrier discharge. It could have been two plates with a dialectric in between those plates "yes a capacitor". This field you do not normally see, this photo was taken with a long exposure in a dark room.

Now what if we do not QUITE reach the discharge point when it is charged, but when a magnetic field passes by it generates just sufficient extra charge to take it over the top, and it discharges.

Now think about it, we charge it up and it pushes the magnet away "rotor", the secound magnet passes and charges it over the top to a discharge "generator". what you have to work out is how you time this with powering and extracting all from the same coils.

By the way the photo is borrowed from J L Naudin

Think about

Shorting coils
Loads
DC to DC converters
Half wave rectification
Capacitor break down "small capacitance"

Mike

[Xenomorph]

Excess energy is there all the time.
Just look at the heavyside component even in a straight wire.
You can "extract" excess energy with a simple coil with the right set-up already.
The "EH antenna" concept used in a generator looks promising at first sight because it looks like it is not reflecting back to the source, which is a condition for getting excess energy out.
What i find problematic is that a rotating magnet does not cause magnetic waves by itself , but rather a torsional field. So the "antenna" concept might not apply for the generator.

[vrand]

Hi Xeno

What I found interesting with the EH Antenna design was the resonant circuits using conventional AC waveforms to generate their HZ magnetic longitudinal wave.

What Eric Dollard found that in order to create Tesla's longitudinal electricity that impulse waveforms were needed in Tesla's spiral formed resonant coils circuits. Impulse waveforms were generated by spark gaps or other negative resistors like hydrogen thyratron's (Dollard used the Western Electric 1B22).

This EH design does away with the spark gap altogether!

So what can one do with this new HZ vector that "represents a magnetic component due to ROTARY movement of an electric charge" besides using it as an AM antenna?



Can we somehow extract free energy from the "ambient environment" with this HZ design, as Don Smith says can be done with his devices? No one has yet replicated the Tariel Kapanadze's generator design which was based on Tesla's inventions.

Tesla's longitudinal electricity has been around for over 100 years yet we still have not found a way (except Don Smith and Tariel Kapanadze) to tap the clean renewable unlimited energy all around us in space.

Cheers Mike

[Xenomorph]

@Vrand: Michael Nunnerley described the bucking coil configuration.
It certainly DOES create antiphase signals, but there is still 2 opposing magnetic fields.
The second illustration of the (rectified) caduceus coil will in my understanding not allow magnetic fields to be created due to the close windings. It also creates antiphase signals. It is supposed to create a rather capacitive effect.

Michael Nunnerly is probably the best person to point out to you the best arrangement that creates the 3 dimensional field effect he presents with this thread.
In my personal opinion, any coil is capable of creating free energy.
It is about the design of the secondary circuit, that allows you to make use of it.