Announcement
Collapse
No announcement yet.
Harvesting Energy From the Sun Using Crystals
Collapse
X
-
It is the triangle shape that causes the etheric light field to allign. This filed flows trough all things randomly until it can be funeled or coehersed into a pattern. The crystal allows a perfect harmony of light in its physical essence and what is considered to be electricity, which is really more like static electricity to be harnassed. The only thing is that is not fundamentally known is that static electrictity is neither static nor electricity. Electricity flows from high potential to low and takes a metallic conductor to flow through. Static electricity does not and can accumulate even on isulators as well as conductors. Static electricity is really an unknown collision of the light etheric field and physical field and should really be called ethericity not static electricity. However it is the pyramid shaped crystal that allows this field to be harvested, condensed and funneled and even stored(depending on the inteior crystalline structure) to be used. To confirm this all you would have to do is take a crystal, such as the ones on you tube where there seems to be energy/electricity being drawn from it. turn off the lights and you will see the electricity stops flowing. A battery will even give energy in the dark. This confirms that it is light that is being converted to electricity. But place a battery in water and it will short out. A crystal will not short out in water. This shows that this 'electricty' as we think it is is not exactly what we think it is. This is light ethericity being converted into a stable and usable form so similar to electricty that the device requiring energy can not differintiate. However their properties, while similar enough to run objects, does not behave under the same perameters as conventional electricity. This is why telsa said to look at the shape of the pyramid or (3,6,9) for understanding.
-
side note
have you thought about the Ley lines in relations to Atlantis and the fact that Edward Leedskalnin also set up his Coral Castle along one of these Ley lines, also the Bimini Wall found in the Caribbean :thumbs:Originally posted by Freezer View PostYou might be interested in this video.
YouTube - ‪4-22 In Search Of... The Bimini Wall (Part 3 of 3)‬‏
ufotv doc
YouTube - ‪Search for Edgar Cayce's Atlantis - Full Feature‬‏

btw: Edgar Cayce lived in:
1 Biography
1.1 1877 to 1920: Kentucky period
1.2 1920 to 1923: Texas period
1.3 1925 to 1945: Virginia Beach period
i wonder if there are any ley lines where he lived
Edgar Cayce - Wikipedia, the free encyclopediaLast edited by MonsieurM; 07-13-2011, 03:11 PM.
Leave a comment:
-
Originally posted by Golden Mean View PostI plan to do some crystal experiments eventually. Just got some crystals this Spring off some land my family owns in northern MN ... and am Sun-cleansing them in my greenhouse and garden areas until I have time to work with them more in a more "concentrated" way.
Have a great day!
Excellent news
the Golden Mean is a self similar figure ie: fractal
, check out my latest post in http://www.energeticforum.com/renewa...er-coil-4.html, talks about fractal resonance and specially that at the high-frequency regime (concentrated light is high frequency beam ), a number of universal (geometry-independent) properties that are described by random matrix theory emerge.
Leave a comment:
-
I plan to do some crystal experiments eventually. Just got some crystals this Spring off some land my family owns in northern MN ... and am Sun-cleansing them in my greenhouse and garden areas until I have time to work with them more in a more "concentrated" way.Originally posted by MonsieurM View Post
When you have succeeded in focusing the light could you try it on a quartz crystal:
Solar power without solar cells: A hidden magnetic effect of light could make it possible

Have a great day!Last edited by Golden Mean; 05-05-2012, 08:04 PM.
Leave a comment:
-
Patrick Kelly's Notes
Pavel Imris was awarded a US patent in the 1970s. The patent is most interesting in that it describes a device which can have an output pwer which is more than nine times greater than the input power. He achieves this with a device that has two pointed electrodes enclosed in a quartz glass envelope which contains xenon gas under pressure (the higher the pressure, the greater the gain of the device) and a dielectric material...
...An optical electrostatic generator which is effective for producing high frequencies in the visible light range of about 10^14 to 10^23 Hz. . . .now it doesThe present optical electrostatic generator does not perform in accordance with the accepted norms and standards of ordinary electromagnetic frequencies.
the extra energy comes from:
Solar power without solar cells: A hidden magnetic effect of light could make it possible
Light has electric and magnetic components. Until now, scientists thought the effects of the magnetic field were so weak that they could be ignored. What Rand and his colleagues found is that at the right intensity, when light is traveling through a material that does not conduct electricity, the light field can generate magnetic effects that are 100 million times stronger than previously expected. Under these circumstances, the magnetic effects develop strength equivalent to a strong electric effect. from the article
Pavel Imris: Optical Electrostatic Generator -- 900% Efficiency
Last edited by MonsieurM; 07-10-2011, 01:09 AM.
Leave a comment:
-
also
The Shape Of SoundHowever, Buckminster Fuller and his students such as Hans Jenny(4) were able to recreate these waveforms using colloidal suspensions or dyes in liquids. Again, certain frequencies resulted in standing waves with visible and equally spaced nodes in three dimensions.The solution appears to have been resolved by combining Pythagorean wisdom with the Hindu scriptures.(6) All the Platonic solids fit exactly within a perfect sphere which is the shape of the fundamental frequency at the beginning of the octave. Its closest relation, the Icosahedron, actually appears twice, once as an inner version within the Octahedron and once as an outer version following the Dodecahedron.(1) Thus we have a complete octave of shapes to match the Diatonic scale.
in other words all comes out of ZeroPythagorean wisdom with the Hindu scriptures.(6) [B]All the Platonic solids fit exactly within a perfect sphere which is the shape of the fundamental frequency
The concept of zero as a number and not merely a symbol for separation is attributed to India where by the 9th century AD practical calculations were carried out using zero, which was treated like any other number, even in case of division.[10][11] The Indian scholar Pingala (circa 5th-2nd century BC) used binary numbers in the form of short and long syllables (the latter equal in length to two short syllables), making it similar to Morse code.[12][13] He and his contemporary Indian scholars used the Sanskrit word śūnya to refer to zero or void.Last edited by MonsieurM; 07-09-2011, 10:23 PM.
Leave a comment:
-
http://en.wikipedia.org/wiki/Hans_Jenny_(cymatics)
Hans Jenny (16 August 1904, Basel - 23 June 1972, Dornach) was a physician and natural scientist who is considered the father of cymatics, the study of wave phenomena.BTW: Hans Jenny was a student of Buckminster FullerJenny made use of crystal oscillators and an invention of his own by the name of the tonoscope to set plates and membranes vibrating. With the tonoscope, quartz sand is spread onto a black drum membrane which is 60 cm in diameter. The membrane is set into vibrations by singing rather loudly through a cardboard pipe. The sand now produces complex symmetrical forms, known as Chladni patterns named after Ernst Chladni who discovered this phenomenon in 1787. Low tones result in rather simple and clear pictures, while higher tones form more complex structures.[1]
Leave a comment:
-
Excellent project Golden MeanOriginally posted by Golden Mean View PostAwesome thread!
I have been researching this area extensively lately and have developed an inexpensive method to build a light tube transmission system.
All you need is PVC, mylar (2mil or 4 mil) and miter saw or other angled cutting system. Mylar is simple rolled up inside the PVC pipes and angles are created by cutting corner PVC pieces at 45 degree angles. Works very well!
I am currently testing a passive "light trap" geometry using my namesake (Golden Mean) to passively capture sunlight and transfer it down the light tube.
So far, I've successfully shot a laser light and maintained much of the coherence through the spiral and out the light tube if the right angle of entry is set. (See attached pics) This small test prototype is not even optimized or completed yet as I am on to a much larger 3' x 4' x 22" spiral with a 2" PVC pipe for the middle and a black painted copper pipe going through the center for a solar heating test. I'll post more pics when time allows as I have a million things going on in multiple realities all at once and it can be quite taxing at times!!
Let's create the reality we wish to experience and give everyone a fair chance to explore who they are more fully by removing poverty from this planet and reduce crime to minimal levels.
Many Blessings to All.
,.. I would love to hear updates on your project
in a way you are forcing the light to vortex...interesting concept
Victor Schauberger style....

When you have succeeded in focusing the light could you try it on a quartz crystal:
Solar power without solar cells: A hidden magnetic effect of light could make it possible
Light has electric and magnetic components. Until now, scientists thought the effects of the magnetic field were so weak that they could be ignored. What Rand and his colleagues found is that at the right intensity, when light is traveling through a material that does not conduct electricity, the light field can generate magnetic effects that are 100 million times stronger than previously expected. Under these circumstances, the magnetic effects develop strength equivalent to a strong electric effect. from the article
Last edited by MonsieurM; 07-10-2011, 10:40 AM.
Leave a comment:
-
More pics of the 3'x4' spiral light trap...Last edited by Golden Mean; 05-05-2012, 08:04 PM.
Leave a comment:
-
Awesome thread!
I have been researching this area extensively lately and have developed an inexpensive method to build a light tube transmission system.
All you need is PVC, mylar (2mil or 4 mil) and miter saw or other angled cutting system. Mylar is simple rolled up inside the PVC pipes and angles are created by cutting corner PVC pieces at 45 degree angles. Works very well!
I am currently testing a passive "light trap" geometry using my namesake (Golden Mean) to passively capture sunlight and transfer it down the light tube.
So far, I've successfully shot a laser light and maintained much of the coherence through the spiral and out the light tube if the right angle of entry is set. (See attached pics) This small test prototype is not even optimized or completed yet as I am on to a much larger 3' x 4' x 22" spiral with a 2" PVC pipe for the middle and a black painted copper pipe going through the center for a solar heating test. I'll post more pics when time allows as I have a million things going on in multiple realities all at once and it can be quite taxing at times!!
Let's create the reality we wish to experience and give everyone a fair chance to explore who they are more fully by removing poverty from this planet and reduce crime to minimal levels.
Many Blessings to All.
Leave a comment:
-
Chladni figures for a square steel plate (adapted from Waller 1961) demonstrates the fantastic variety of standing wave patterns that can arise from a simple resonating system. A square steel plate is clamped at its midpoint and sprinkled with sand. It is then set into vibration either by bowing with a violin bow, or by pressing dry ice against it. The resultant standing wave patterns are revealed by the sand, that collects at the nodes of the oscillation where the vibration is minimal.
Harmonic Resonance Theory: An Alternative to the "Neuron Doctrine" Paradigm of Neurocomputation to Address Gestalt Properties of Perception
Harmonic Resonance Theory
now compare the image above with this crystalline structure of quartz picture, which picture matches the crystal structure ? :

Huifang XU, et al -- Zn Oxide photoelectrolysis
This is probably the best way to get the resonance of an element (such as quartz), if you can match the cymatic figure that is created at a certain frequency(on water or quartz sand) to its structure.Abstract: Materials scientists at the University of Wisconsin-Madison have designed a way to harvest small amounts of waste energy and harness them to turn water into usable hydrogen fuel. The process is simple, efficient and recycles otherwise-wasted energy into a usable form...
....More specifically, certain piezoelectric materials, including but not limited to .alpha.-quartz (SiO.sub.2), ZnO, or BaTiO.sub.3, among others, have unique piezoelectric properties where the piezoelectricity is an intrinsic property of the material, such that no physical/chemical doping (cations or anions), chemical additives (including transition metals) or any forms of implantation are needed to create these properties. In addition, one of the materials having these properties, i.e., quartz, is also one of the most abundant minerals on the Earth's surface (i.e. beach sands). As a result, by using quartz as a material in the process, the hydrogen production via direct-water-splitting can be achieved at a low cost, and, because quartz is a natural material that is environmental friendly, no pollution issues are created by the process.
Cymatics.org
Last edited by MonsieurM; 07-09-2011, 09:16 PM.
Leave a comment:
-
Mitigating Joint Pain- A Second Look at Tuning the Weak Field of Quartz Sand | Helpfulwaves.comOriginally posted by totoalas View PostCheck out helpful waves.com
YouTube - ‪Tuning Quartz Sand for Self Healing with an Audio Speaker‬‏
thank you for this nice add on, do you look for a particular figure when you charge the quartz sand:
i know that piezoelectric crystal are used as vibration sensors
see also Piezoelectricity - Wikipedia, the free encyclopedia
Last edited by MonsieurM; 07-09-2011, 07:50 PM.
Leave a comment:
-
About Joel McCLAIN & Norman WOOTAN The Magnetic Resonance Amplifier, posted earlier:
the barium titanate transducer:In the MRA schematic below, there is a tunable low-power oscillator which supplies a signal to one side of a barium titanate transducer. The opposite side of the transducer is connected to a primary coil which is wrapped around a barium ferrite magnet core. The opposite end of the primary goes back to the oscillator.
Piezoelectricity - Wikipedia, the free encyclopedia
in google, search also "barium titanate quartz coupling", a lot of info is available check out pdf docs , you'll see some fractal applications in the telecom industry
Last edited by MonsieurM; 07-09-2011, 11:10 AM.
Leave a comment:
-
This lecture was a great inspiration to me:
In the Nature of Things - A talk by - Gordon Plummer
In the Nature of Things - A talk by - Gordon Plummer
the first half of this vid is just as good:
YouTube - ‪The Universe is a super hologram‬‏
Leave a comment:
Leave a comment: