Announcement

Collapse
No announcement yet.

Free Energy Finally obviously proved! by sebosfato the neim man

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Grazie Alex! will try that!

    For the every one reading,

    I tried to contact the nobel prize team..

    In a short period of time I will be able to show you huge kWh power overunity devices bigger than the electroscope one hehehe. If i get some funding will just be quicker, thats why i contacted the nobel... lets see if they really care about what is needed.

    I would just need to bit of support.

    I also have just invited a physicist friend to help the calculations to decide the size of the bobbins and caps, gaps, diodes... hope he will help otherwise i will need to pay one to do this to me. People is always busy to do the things. Every one need to work...


    I would recommend you to watch Donald L. smith, and Stanley meyer... videos

    Both say that is all about understanding the movement and deflection of the electrons and how it can be done using a static field. Electronics people should understand this. Well all my close friends understood the principle and they are not even scientists and don't even knew what voltage is before i tell them...

    Comment


    • #32
      Originally posted by sebosfato View Post
      Grazie Alex! will try that!

      For the every one reading,

      I tried to contact the nobel prize team..

      In a short period of time I will be able to show you huge kWh power overunity devices bigger than the electroscope one hehehe. If i get some funding will just be quicker, thats why i contacted the nobel... lets see if they really care about what is needed.

      I would just need to bit of support.

      I also have just invited a physicist friend to help the calculations to decide the size of the bobbins and caps, gaps, diodes... hope he will help otherwise i will need to pay one to do this to me. People is always busy to do the things. Every one need to work...


      I would recommend you to watch Donald L. smith, and Stanley meyer... videos

      Both say that is all about understanding the movement and deflection of the electrons and how it can be done using a static field. Electronics people should understand this. Well all my close friends understood the principle and they are not even scientists and don't even knew what voltage is before i tell them...
      Last edited by tutanka; 11-03-2010, 06:41 AM.

      Comment


      • #33
        meyer, smith..

        Scusa Fabio,
        Ma cosa c'entra meyer, smith, etc.. con quello che stai facendo? Utilizzi ancora acqua? Risonanza nell'acqua o....
        Last edited by tutanka; 11-03-2010, 11:29 AM.

        Comment


        • #34

          Comment


          • #35
            Last edited by tutanka; 11-10-2010, 09:59 PM.

            Comment


            • #36

              Comment


              • #37
                Scott McKie -- PODMOD Over-unity power generator

                Another friend who like me also think that asymmetry is the key.

                Comment


                • #38
                  Would be nice if people spoke english for a change. Google translator can't translate anything.
                  You can view my vids here

                  http://www.youtube.com/SJohnM81

                  Comment


                  • #39
                    I was speaking in italian with tutanka, because he is italian and as i lived there for a while (4 years) i can understand better what he say and he can understand better what i say.

                    I was willing to share this new fantastic old Tesla technology but i felt that people are thinking that i'm a scammer only because i'm asking money help to be able to complete my prototype...

                    I have spent my last 2000 euros with tests... in the last months and now i got any. Well i will get over it.

                    If you are willing to understand we can discuss in english.

                    Tutanka is trying to show me some related reseach with free electrons but i'm not understanding very well, i need to study a little bit more.

                    However... what did you understood of my idea?

                    What do you think about?

                    Today i went to the physics university and talked to a professor specialized in electromagnetism and i explained this idea to him, he understood and agree that this way the energy out will not be related to the energy in, however told me that is a very very very complicated model to calculate, hope he will help me. I invited him to talk further with more calm. I talked about to him about tesla thoughts about maxwell equations and he confirmed that there are inconsistencies. He was very happy about my interest in this field.

                    He indicated to me this physicist YouTube - Jô entrevista o físico Andre Koch Torres Assis - Parte 2 - Exibido em 07/09/1998
                    he told me that he is specialized in tesla technologies and that he could be happy to help me.

                    I'm thinking on a way to determine the energy yield empirically, however i would like to at least make a calculation model as to not shoot in the dark and avoid money waste.

                    However i thought about using a diode in the "middle" of the electroscope model so it can charge and remain charged to be able to discharge it later... This is not a practical solution yet, is only for understanding, ok

                    Tell us your impressions.

                    I have more advanced theoretic models but is way far more complicated, when we can determine this we go to the more complicated.

                    BEst Regards
                    Last edited by sebosfato; 11-05-2010, 01:55 AM.

                    Comment


                    • #40
                      Last edited by sebosfato; 11-05-2010, 05:16 AM.

                      Comment


                      • #41
                        Originally posted by sebosfato View Post
                        Alex,

                        Hai per caso contato con questi? METHERNITHA quelli che hanno idealizzato testatika?


                        Last edited by tutanka; 11-05-2010, 08:25 AM.

                        Comment


                        • #42
                          ammonia test?

                          Hello Fabio,

                          This is a community of Swiss purists therefore have no technology or email to contact you. Anyway the extra energy is released by the electrons emitted in this case, from molecules of air. I think the design they used is very similar to the generator Aspden, the only thing they added is the use of this particular battery magnet / dielectric which absorbs static electricity and turns it into voltage. I am convinced that any reaction to create energy occurs in two large cylinders side that convert radiant energy into electricity at medium voltage. I do not know why seeing Testatika I remember Edwin Gray and his "splitting the positive", perhaps because within its "tube" is probably the usual reaction of Testatika, Radiant Energy that is generated using high voltage or COLD PLASMA and a frequency not exceeding 6kHz.

                          Yesterday I occurred with a real test this theory and in fact the reaction takes place in the range 5-6KHz when that happens you hear a whistle, a hiss, hiss in English, high frequency generated by the effective emission of electrons.

                          It should also have an oscillating circuit with a very precise separation circuit using a photocoupler between the oscillating circuit and the power stage supplying the high voltage transformer SENNA it does not work, there are crazy two months to understand this.

                          But the most impressive thing is that, during testing I plunged my device gray water, I pulled out and I have power, so few molecules of water covered it well then I can assure you that radiant energy has the power to turn water, probably Brown's gas, and transform it into gaseous ammonia for the simple reason that the cold plasma produces ozone and nitrogen oxides when exposed to air, of course, the processing took place in an open and then even in the presence of oxygen and then the percentage of ammonia produced could not be more than 10%, but as you know the smell is unmistakable and persistent.

                          If you want you can translate this for other forum users.
                          Sincerely,
                          Aaron Murakami

                          Books, Videos, ESTC Conference Info, Blog, etc. https://emediapress.com

                          Comment


                          • #43
                            Thanks Aaron..

                            Yes.. that reassume all work during these years.. casually I have found that yesterday.. all peoples can create directly with right diagram circuit that system because to the end is very simple to realize. Is based every on RF as Mike project.. of course.. that not use MHz but only Khz.. and your RF amplifier is just an coil. However think that.. you have only one system for obtain NH3/N2O. At the same time (tested every yesterday) you can produce also electricity! I have been ready the NH3 reactor and now that new system. All works but that latest is very simple to realize. I suppose no more of 300USD are necessary for an good direct creation.
                            Last edited by tutanka; 11-05-2010, 08:52 AM.

                            Comment


                            • #44
                              Schematic Please

                              Originally posted by Aaron View Post
                              Hello Fabio,

                              This is a community of Swiss purists therefore have no technology or email to contact you. Anyway the extra energy is released by the electrons emitted in this case, from molecules of air. I think the design they used is very similar to the generator Aspden, the only thing they added is the use of this particular battery magnet / dielectric which absorbs static electricity and turns it into voltage. I am convinced that any reaction to create energy occurs in two large cylinders side that convert radiant energy into electricity at medium voltage. I do not know why seeing Testatika I remember Edwin Gray and his "splitting the positive", perhaps because within its "tube" is probably the usual reaction of Testatika, Radiant Energy that is generated using high voltage or COLD PLASMA and a frequency not exceeding 6kHz.

                              Yesterday I occurred with a real test this theory and in fact the reaction takes place in the range 5-6KHz when that happens you hear a whistle, a hiss, hiss in English, high frequency generated by the effective emission of electrons.

                              It should also have an oscillating circuit with a very precise separation circuit using a photocoupler between the oscillating circuit and the power stage supplying the high voltage transformer SENNA it does not work, there are crazy two months to understand this.


                              But the most impressive thing is that, during testing I plunged my device gray water, I pulled out and I have power, so few molecules of water covered it well then I can assure you that radiant energy has the power to turn water, probably Brown's gas, and transform it into gaseous ammonia for the simple reason that the cold plasma produces ozone and nitrogen oxides when exposed to air, of course, the processing took place in an open and then even in the presence of oxygen and then the percentage of ammonia produced could not be more than 10%, but as you know the smell is unmistakable and persistent.

                              If you want you can translate this for other forum users.
                              Thanks Aaron for translation.

                              Dear Tutan can u please put Schematics of your experiment highlighted above?!

                              Many thanks in advance

                              Comment


                              • #45
                                Originally posted by leedskalnin View Post
                                Thanks Aaron for translation.

                                Dear Tutan can u please put Schematics of your experiment highlighted above?!

                                Many thanks in advance

                                You can find the informations here, How to build your Glow Discharge Plasma Panel. I have only used different electronic circuit and panel construction. Regards

                                Comment

                                Working...
                                X