Don Smith A review...

[med.3012]

An approximation to Smith's device

Yes this is very important if we take a look at this device from another angle, combining 3 wire to become just two has a lots of indications, in my point of view volts and ampere must be in equal state physically, L1 coil have to work as a kind of electrons divergence mechanism, in this stage a source of huge electromagnetic flux is produced ...


L2 coil must do the opposite things as previously stated, Volts and ampere must meet each other so the resistance R is introduced, this mean useful work !

the electrons divergence ( serial ) in L1 coil have to come after the electrons convergence (parallel)

this is a photo of Don device where it's clear the presence of two parallel diode just to make L2 in equilibrium state.

[AetherScientist]

An approximation to Smith's device

[AetherScientist]

Referring to some the recent posts by AetherScientist, I believe we have a variation of a dipole tesla coil.

See Dipole

Following the discourse on this thread with great interest, thanks med.3012 and AetherScientist for your constructive ideas.

The first thing I thought when I saw your website is about the picture about the dipole antenna. I have seen some websites about very interesting experiments with the same antenna and I will post the links.

[MorningStar]

Referring to some the recent posts by AetherScientist, I believe we have a variation of a dipole tesla coil.

See Dipole

Following the discourse on this thread with great interest, thanks med.3012 and AetherScientist for your constructive ideas.

[med.3012]

In the experiments I told you about the av plug and the ignition coil + the negative from the input of the ignition coil, I was able to light a bulb using non-polarized capacitor.

i remember this but we are working on different system, i just share my observation, ok it's too late here , see you tomorrow, good night to all :-)

[AetherScientist]

@ AetherScientist


just a quick reply to your previous asked question about the power in one second, the problem is my understanding was totally wrong, yes i need to do some calculation to know the better value about voltage and capacitance, as you said it have to be a step up transformer, more voltage will produce more power but some skill will be needed.

by the way i wasn't able to light the bulb using no politicized capacitor! i have no idea why this happen, a small neon light bulb work nice in the output, i have to think about the wires from the L2 into the capacitor, maybe there's something there!

maybe ant man will help us !

In the experiments I told you about the av plug and the ignition coil + the negative from the input of the ignition coil, I was able to light a bulb using non-polarized capacitor.

[med.3012]

Thanks Bob, every word is important, thanks AetherScientist for the nice explanation, this look like the old water pump :

we need both direction to have the water ! very simple but in electricity it can't be seen, adding more diode seem to make the water go to another direction but not in the capacitor, the next step is to measure the wire length in both side and make them equal the best possible, the length of diode connection is important too, sliding L1 coil inside L2 will help also in tuning process, it seem everything is very important !!

[AetherScientist]

This one has took more time. It's bigger than the previous ones.



The circuit that I have just explained.

[AetherScientist]

Part 2. I'm writting part 3

[Bob Smith]

Parallel vs Series Capacitors

I don't know if this will help further things. If not, please disregard.
Bob[

QUOTE]Series and Parallel Capacitors
It may seem that there’s no point to adding capacitors in series. But it should be pointed out that one thing we did get is twice as much voltage (or voltage ratings). Just like batteries, when we put capacitors together in series the voltages add up.

Adding capacitors in parallel is like adding resistors in series: the values just add up, no tricks. Why is this? Putting them in parallel effectively increases the size of the plates without increasing the distance between them. More area equals more capacitance. Simple.


[/QUOTE]
Source: https://learn.sparkfun.com/tutorials...lel-capacitors

[AetherScientist]

Part 1... I am writting part 2 and there will be more parts.

[med.3012]

@ AetherScientist


just a quick reply to your previous asked question about the power in one second, the problem is my understanding was totally wrong, yes i need to do some calculation to know the better value about voltage and capacitance, as you said it have to be a step up transformer, more voltage will produce more power but some skill will be needed.

by the way i wasn't able to light the bulb using no politicized capacitor! i have no idea why this happen, a small neon light bulb work nice in the output, i have to think about the wires from the L2 into the capacitor, maybe there's something there!

maybe ant man will help us !

[AetherScientist]

i agree with you but i think it's a good idea to analyze this phenomena regarding further experiment, i guess there is something valuable is hidden here, Donald Smith explain this in one of his old video: you have to separate the electrons and after that you need to assemble them together so you have useful electric power, energy production and then energy extraction .

adding more diodes to just one side affect greatly the output, equilibrium is important here... understanding this may help in increasing the performance of this system .. who know !

I was doing some tasks, so I stop posting new posts. I'm writting a new one and you've wrote a very interesting thing:

" Donald Smith explain this in one of his old video: you have to separate the electrons and after that you need to assemble them together so you have useful electric power, energy production and then energy extraction. "

It's the same idea that I got before reading your post. So the next post I will explain what I think and you will see how is exactly the same that you have written in your post about "after you need to assemble them". I will take some time to write the post, but I have started now.

[med.3012]

i agree with you but i think it's a good idea to analyze this phenomena regarding further experiment, i guess there is something valuable is hidden here, Donald Smith explain this in one of his old video: you have to separate the electrons and after that you need to assemble them together so you have useful electric power, energy production and then energy extraction .





adding more diodes to just one side affect greatly the output, equilibrium is important here... understanding this may help in increasing the performance of this system .. who know !

[AetherScientist]

Looking in other publications, we can find that other authors explains something similar:


So we can think that Smith is not the only one that has observed a similar behaviour in magnetics.

Even science speaks about this phenomenon