Kapagen Theories, Replications, Winding Diagrams, Circuits & Schematics. KAPAGEN ONLY

[Berg]

Daly Schematic



Daly Device in Operation



Daly Device Schematic

Really, combination schematic and block diagram.

An English translation would be nice.

Daly Schematic (Full Size Image)

http://imageshack.us/a/img607/2421/dally1.gif

Original Source:

Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

http://realstrannik.ru/media/kunena/attachments/1226/dally1.GIF

Images of how the coil was wound:

Cheers

[EMCSQ]

2 different devices

Hello

IMHO there are 2 different devices existing using both ferrites.
The one introduced by berg the length of the windings are chosen according to the wavelength. This will only work , if wound very accurate.
And the other one used / introduced by sr193 , tiger , and lately by Fabrice Andre (Refuge de Sarenne) .
This type is shown in the attachments.
The 50 / 60 Hz Input / Output windings have nothing to do with wavelength .
There is unipolar force applied by a spark gap between the inner copper rod and the thin winding / layer on the outside diameter of the rings.
On top of this thin winding / layer the Input / Output windings are wound.
Thats all.
Now I think the ferrites do the job and the material composition is crucial.
Because I replicated a so called 'eternal light' yoke device shown by tiger,
nothing fancy, only a joule thief with a output winding with center tab rectified an fed back to the input. Small needle pulses , a very low power consumption (3mA) but their input amplitude decayed, when operated in loop mode. Since I replicated this with the only difference that I used a pnp transistor , not an npn , I am convinced that the material of the yoke is crucial for function.

[Berg]

Wesley's Thoughts on Kapanadze-type Devices



9/11 part#2 OU NO NEED of BATTERY .avi - YouTube

Interesting video by Wesley (stivep1) discussing some of the circuitry of device posted in a video by FreeEnergyLT and Kapanadze's device.

DALY FREE ENERGY NO BATERY !!!!! 2012.09.11. - YouTube

DALY FREE ENERGY NO BATERY !!!!! 2012.09.10. - YouTube

Cheer

[Berg]

Thanks Berg for this.
I. most probably HV transformer driver.

You're welcome and thanks, Guruji.

[Guruji]

Thanks Berg for this.
I. most probably HV transformer driver.

[Berg]

Kapagen with Handcranked Start Generator



I'm trying to figure out the parts of this device.

A.  Possibly, bifilar pancake coils.
B.  Capacitor bank.
C.  Switch or switches.
D.  Toroid coil.
E.  Plug and electrical outlet.
F.  Handcranked generator. 
G.  HV module.
H.  Flyback transformer.
I.  Most probably, HV transformer driver. [I]Courtesy, Guruji[/I]
J.  Output transformer.

Any suggestions appreciated.

Cheers

[Berg]

Russian Home-built Kapanadze Unit Started with Hand-cranked Generator



This experimenter cranks the handle of a small generator to charge a capacitor bank, using a voltmeter to check the voltage. When the capacitor bank is fully charged, he flips a switch and a few seconds later three large lamp bulbs light up.



The amount of light output by the lamps is impressive.



The experimenter is able to hold up the unit.

1 KW FREE ENERGY 2013.01.06.flv - YouTube

Download video in MP4 Format

There is a link at the video for more information on it, but it's in Russian.
ANONIMUS 2013.01.28

Of course, I included a translation link for it.
Google Translate

In reviewing that site, I found the following link on it:

ANONIMUS FREE ENERGY / FreeEnergyLT / FreeEnergyLT

Good hunting.

Cheers

[Berg]

Solidstate Kapagen

Here's an interesting web site on a solidstate Kapagen.

Free Energy: Kapagen Generator

Cheers

[Guruji]

If the analysis is correct the Kapagen emits radiation. The analysis seems to be saying the radiation is uniform in all directions. It would not be emitting a directed "beam" or "ray" as in a "ray gun". The analysis, if correct, indicates that the correctly designed and functioning device would definitely and without doubt generate and emit radiation of the beta and possibly gamma types. The part that is not explained is the actual nuclear reactions that would come into play. Also, it is not explained how nuclear magnetic resonance triggers or causes transmutation of copper, zinc or iron. It simply assumes the reader understands that this happens and is possible. I don't know enough to rule it out, but I am only saying it is not within my knowledge and I don't regard it as "accepted truth". If Rossi is correct, then why not Kapanadze? I think this does serve as a warning. I would want to be prepared to measure radiation, esp. Beta radiation and stand well back from the device while testing. Bone up on your physics if you don't want radiation poisoning.

In that sense every electrical device emits radiation the big question how much. Yes it would be wise to measure but we should be sure that this is dangerous before saying that it is.

[wayne.ct]

Radiation vs. Radioactive rays

GSM and Dave Interesting info. Is this true that this can emit radioactive rays?!!!!
Thanks

If the analysis is correct the Kapagen emits radiation. The analysis seems to be saying the radiation is uniform in all directions. It would not be emitting a directed "beam" or "ray" as in a "ray gun". The analysis, if correct, indicates that the correctly designed and functioning device would definitely and without doubt generate and emit radiation of the beta and possibly gamma types. The part that is not explained is the actual nuclear reactions that would come into play. Also, it is not explained how nuclear magnetic resonance triggers or causes transmutation of copper, zinc or iron. It simply assumes the reader understands that this happens and is possible. I don't know enough to rule it out, but I am only saying it is not within my knowledge and I don't regard it as "accepted truth". If Rossi is correct, then why not Kapanadze? I think this does serve as a warning. I would want to be prepared to measure radiation, esp. Beta radiation and stand well back from the device while testing. Bone up on your physics if you don't want radiation poisoning.

[C/pi_over_Planck=1]

A definitive test to determine if in fact 1500 watts (or any actual surplus) are realized from 180 would be to set up a large bank of batteries connected to an inverter which supplies at least 180watt 200v ac. Power a single bulb, and also a D.C. charging circuit back to the battery bank. It would be trivial to determine if the bank was discharging with a simple volt meter. Keep it simple!

[Berg]

Working Kapagen Replication

Working Kapagen Replication

Looked at:

http://www.youtube.com/watch?v=nIfl55Vd-sI

which shows a link to


Source: безтопливный генератор Романова.mp4 - YouTube

http://www.youtube.com/watch?v=ET7CrFDs6fY

Found very interesting.

Berg

[Armagdn03]

Hi GSM, I've seen that written before about spark gaps. How exactly does a
spark gap cover all frequencies ?

Do you mean a disruptive discharge will ping a coil to ring down at it's
resonant frequency ? Because if that's what you mean any abrupt discharge
will do the same eg. a capacitive discharge using a mosfet switch. In my
experience if the coil/transformer is tuned, depending on the circuit the spark
gap will automatically fire only in tune. But as far as the concept of a spark
gap covering all frequencies goes, I don't get it. Can you explain ?

I can envision a circuit where as the coil rings out the spark gap could only
fire again when the potential difference across the gap allows it to happen.

Cheers

I think what he is trying to say is that a resonant structure excited by a pulse will resonate at harmonics from its fundamental till the highest harmonic which is not shorter than the initiating pulse. Each harmonic excited will have differing intensity levels based on its relation to the fundamental.

[Farmhand]

A spark gap merely covers all frequencies in order to ensure operation.

Hi GSM, I've seen that written before about spark gaps. How exactly does a
spark gap cover all frequencies ?

Do you mean a disruptive discharge will ping a coil to ring down at it's
resonant frequency ? Because if that's what you mean any abrupt discharge
will do the same eg. a capacitive discharge using a mosfet switch. In my
experience if the coil/transformer is tuned, depending on the circuit the spark
gap will automatically fire only in tune. But as far as the concept of a spark
gap covering all frequencies goes, I don't get it. Can you explain ?

I can envision a circuit where as the coil rings out the spark gap could only
fire again when the potential difference across the gap allows it to happen.

Cheers

[maxpesh]

Has anyone tried to use HPS bulbs with these experiments ?