gravity waves found

[david lambright]

model..

what would we get if we over lay pinestone and/or magnetic warp, and/or schlieren etc,...what would the model look like?...david

[Harvey]

I don't know - they both use light, but in different ways.

Overlaying them or creating some sort of dependency between them may cause one or the other effect to be lost. The light sources on the Pinestone apparatus come in at 90° to the visual path and are changed directionally depending on the interaction there with the oil and magnetic field.

I'm not sure how we would integrate that with the Schlieren imagery.

[david lambright]

sorry, i meant like digitally overlay a pix ..schlieren, with the same shot but using pinestone, of my device....to see more of whats going on.....a girl asked me last saturday, "what were you pouring out of that thing"....it does look odd for sure..[quartz+rotor+energy wave] any insight or ideas you want to share....no matter how "out there"or small it may seem, and the ones you know are good, are welcome in my ears!...we have never met but you are my friend....when we take what we know, use that to make new discoveries, ..then the only limit is our imagination...........joking with misty i said "i imagined all of this into existance" ....but it is true!...david

[Harvey]

sorry, i meant like digitally overlay a pix ..schlieren, with the same shot but using pinestone, of my device....to see more of whats going on.....a girl asked me last saturday, "what were you pouring out of that thing"....it does look odd for sure..[quartz+rotor+energy wave] any insight or ideas you want to share....no matter how "out there"or small it may seem, and the ones you know are good, are welcome in my ears!...we have never met but you are my friend....when we take what we know, use that to make new discoveries, ..then the only limit is our imagination...........joking with misty i said "i imagined all of this into existance" ....but it is true!...david

Oh, I see what you mean - yeah you can do that from what I hear with editing programs that have layers - the superimposed thing. Anywhere there is magnetic flux, then the Pinestone device would work I think.

"What were you pouring . . ."
Reminds me of this:
YouTube - Invisible water.

You are so right about "imagined all of this into existance" - every now and then I take a pause and look around my office - 99.9% of everything I see first began in some human imagination somewhere. Then I go outside and that quickly drops to about 50%. And if I go out in the backwoods somewhere, it drops to about 1%. But I am certain that 100% of everything in existence, first began as thought, whether man's or God's it still becomes a reality based on our imagination. Nothing we have in mind is unattainable for us. (See Genesis 11:5-6)

[david lambright]

message from nick

Hi David,



I watched your videos and the first comments are that I really didn’t see the field that you claim to see with your eyes, but that’s common, the camera doesn’t always see or record what the eyes do. Witness human auras. Try this: bathe the apparatus with a very bright light, preferably full spectrum light, and then view or photograph the phenomenon against a very dark background; black, navy blue, etc.



I wonder if you noticed that in some of the your backgrounds faces appear, and as the demo goes on they morph into other faces or groups of faces. This is common in the Vortex where sometimes everything seems made of faces, both to the eye and to the camera; human faces of both sexes, and animal faces. I see that you have indeed found a way to manufacture a different sort of magnet (that’s not a conventional magnet) using the energized pipes and in one of the demos you also seem to have found what I have been referring to for a long time as the Sweet Spot on all magnets ... that point where the magnetic spin field dives through the magnet material, does a Bloch Wall dipsy doodle and reemerges on the other polarity spinning in the opposite direction. All kinds of interesting stuff goes on at the Sweet Spot ... think of it as the event horizon of a black hole that many think might act as a portal to other dimensions.



I can’t really give you any positive direction in improving your discovery other than to guess that levitation may occur if you can figure out how to energize the ring of pipes with a frequency field that osculates with a pulsating current. What frequency? I don’t know, and I don’t know how you might do it.



Nick Nelson

[david lambright]

from nick

Date: Thu, 27 May 2010 23:43:59 -0600

Hi David,



I watched your videos and the first comments are that I really didn’t see the field that you claim to see with your eyes, but that’s common, the camera doesn’t always see or record what the eyes do. Witness human auras. Try this: bathe the apparatus with a very bright light, preferably full spectrum light, and then view or photograph the phenomenon against a very dark background; black, navy blue, etc.



I wonder if you noticed that in some of the your backgrounds faces appear, and as the demo goes on they morph into other faces or groups of faces. This is common in the Vortex where sometimes everything seems made of faces, both to the eye and to the camera; human faces of both sexes, and animal faces. I see that you have indeed found a way to manufacture a different sort of magnet (that’s not a conventional magnet) using the energized pipes and in one of the demos you also seem to have found what I have been referring to for a long time as the Sweet Spot on all magnets ... that point where the magnetic spin field dives through the magnet material, does a Bloch Wall dipsy doodle and reemerges on the other polarity spinning in the opposite direction. All kinds of interesting stuff goes on at the Sweet Spot ... think of it as the event horizon of a black hole that many think might act as a portal to other dimensions.



I can’t really give you any positive direction in improving your discovery other than to guess that levitation may occur if you can figure out how to energize the ring of pipes with a frequency field that osculates with a pulsating current. What frequency? I don’t know, and I don’t know how you might do it.



Nick Nelson

[david lambright]

from nick

Okay, so I dropped all the stuff coming after .org and got the Schlieren site. It seems a novel idea to see/photograph air currents. One of the many anomalies we see in the Vortex are momentary “wrinkles” in the air, and sometimes things emerge from or disappear into those wrinkles; like birds coming and going through what‘s obviously a minor portal. Photographing air movements is neat but the ultimate goal is to see this stuff (like orbs) with the naked eye. Hold your hand and spread your fingers out in front of you, bathe the hand in light, and then view your hand as it appears against that dark background. Move your hand slowly side to side as you track it with you eyes. Concentrate on the spaces between your fingers then the air right next to your fingers. With practice you’ll notice a ripple effect next to your fingers that then becomes the mirage of heat lines such as those seen on a hot road up ahead. Once you get there work on seeing colors in your’s and other’s auras.

[mrbreau]

Fwiw – Leave The Galvanize On

I was almost there. There were four poles on my wheel. The compass would verify that there was a magnetic effect. I could feel resistance in the center of the wheel with non-ferrous metals being placed to the center of the wheel. But I wasn’t getting the full effect David was so I tried tweaking what I had. BUMMER! I lost everything I had.

The problem started when I discovered the word “LOCK” in David’s explanation. I thought I didn’t have the pieces locked so I set out to see if I could get them to lock. Wrong move on my part. Thinking back, I can see that the problems started when I started removing the excess galvanize from the inside of the parts. I lost ever so little there that I barely noticed any difference. But yesterday I tried to get the best fit and ground off any galvanize between where the parts touch. While there is now definitely continuity all the way around the parts won’t lock at all and all I can get is one major magnetic pole and two minor ones right alongside that one. It seems to me I’ll have to scrap the whole deal and start all over again. The zinc and lead play some part in this deal but I’m not smart enough to figure out what that part is. Don’t invite me to any two-car funerals!!! It seems my biggest chore is to figure out how to figure out how to do this or that or how to tell if what I did was the right thing to do.

David might have a comment or two about this. Since he built the working prototype he would know what to take and what to leave.

I’ll start on the next one tomorrow, actually today but later on today. It used to upset me that there were never accurate directions on how to build some of these things, only clues left behind by some wizard, Bessler, Tesla, or Leedskalnin. (I'm not the sharpest knife in the drawer!) I've learned, though, that figuring these things out gave me an understanding of what it was that I was building, a far better understanding than I would have gotten from directions.....which I probably wouldn't have understood anyway.

Warren
..

[Harvey]

It could be the materials are as critical as getting the metal hot and/or vibrating it during grinding.

I believe David also did clean the Galvanization off the mating surfaces.

As long as the flux has a good path to follow, you should get the pieces to lock and stay together at least well enough to get them taped up and zip-tied.

I would suggest putting each element in the coil and giving each of them a good pulse by themselves and then try and get the lock again. This could help orient the domains back to the desired patterns. Observe the same polarity in each case.

In Davids configuration, the flux should follow the path of 24 parabolic curves facing away from central axis all joined midpoint on the elements. So if the flux has any influence external to the element, the compass needle would follow the edge pattern of the elements if placed directly above them. In a well behaved system, the flux should stay within the material. External interactions could extract energy from the flux and cause it to lose lock.

I think failures outstrip successes at least 10:1 - and besides, Harvard's Law (Number 48 here) always seems to apply to machines whether biological or mechanical. Hang in there

[Jetijs]

Hi all.
Sorry for the late reply.
I tried to make the resin/iron powder mix as thick as I could and poured it into a U shaped mold, no coil at this time. I wrapped a coil around this core and tried to get it to lock but it did not work. Even if 5A of current is flowing through the windings, the core poles do not show any magnetism at all. If I pulse much higher current through the windings in a fraction of second, my pole identifier briefly sees the poles becoming magnetic. Unfortunately even at this high current pulse no lock is happening. So I don't think this whole resin mix idea works.
Jetijs

[rave154]

JET,

using your current resin mixed core....have you tried also using the core as part of the "circuit" too? ( just to see if it works )

might also want to try two coils...one on each leg of the core as in the video/links i posted in an earlier post ( videos not made by myself btw )


these videos...

YouTube - Ed Leedskalnin Magnetic current pt2

[Jetijs]

Rave, I tried one coil, two coils, one large coils wrapped around the whole surface of the core to ensure maximum flux flow - nothing. It is just not the right material.
P.S. The steel pipe from David has not arrived yet and there are some problems with the laser cut wheel.

[SuperCaviTationIstic]

YOU NEED A VOLTAGE FIELD

get yourself a tv/computer monitor and take the flyback lead and ground from it and make a big bowl shaped capacitor and place it under the wheel. You could probably just use a big thick bowl of plastic or oven dried/sealed wood for the dielectric, and put aluminum foil on either side.

THIS IS THE SAME AS THE ARK OF THE COVENANT

you are right, it is a portal. you'll see more orbs and other anomalies/beings if you do what I've said.
I'll say it again, look at all the other gravity/wormhole technology on the web. Bucking magnetic fields WITH electric fields.
Read all you can about John Hutchison

[teslaproject]

Johno

YOU NEED A VOLTAGE FIELD



THIS IS THE SAME AS THE ARK OF THE COVENANT

you are right, it is a portal. you'll see more orbs and other anomalies/beings if you do what I've said.
I'll say it again, look at all the other gravity/wormhole technology on the web. Bucking magnetic fields WITH electric fields.
Read all you can about John Hutchison

Regarding John Hutchinson. I have the utmost respect for anybody that actually does 'hand's on' experimentation rather than theoretical book writing ad-nauseum. Theory is fine up to a certain point but for the most part after awhile it just becomes excess philosophy and another way to destroy tree's without having accomplished anything.

This being said, although John Hutchinson has achieved a lot, let's not get carried away believing everything the man says. I mean cmon...wormhole technology for "beings to teleport between realms"....this is pure conjecture on his part after having seen some flashing emanations around a device (Aether anomaly). There are many electrical experiments that produce 'ghost-like' effects in the atmosphere if you tickle things right.

Saying that some of the most powerful beings in the Universe (Angels) require John Hutchinson's crappy device to go anywhere is like thinking that a Bald Eagle would be better served in improving it's flying ability if it sat down for a talk with a MIT Aeronautics Engineer.

Man is so arrogant sometimes.

TP

[SuperCaviTationIstic]

Regarding John Hutchinson. I have the utmost respect for anybody that actually does 'hand's on' experimentation rather than theoretical book writing ad-nauseum. Theory is fine up to a certain point but for the most part after awhile it just becomes excess philosophy and another way to destroy tree's without having accomplished anything.

This being said, although John Hutchinson has achieved a lot, let's not get carried away believing everything the man says. I mean cmon...wormhole technology for "beings to teleport between realms"....this is pure conjecture on his part after having seen some flashing emanations around a device (Aether anomaly). There are many electrical experiments that produce 'ghost-like' effects in the atmosphere if you tickle things right.

Saying that some of the most powerful beings in the Universe (Angels) require John Hutchinson's crappy device to go anywhere is like thinking that a Bald Eagle would be better served in improving it's flying ability if it sat down for a talk with a MIT Aeronautics Engineer.

Laugh it up....
Pretty evident your mindset since you provide no opinion but only insult.
You don't even address any other sources of THE SAME INFORMATION, only John. I know John knows the real way to harness this stuff...he only shows people an unstable way of doing it, in order to protect the true knowledge. He has 2 opposing field that are on the same plane. They interact between each other, and therefore boch wall moves continuously.
Look at RODIN's coil. Thats the way to build it. The opposing magnetic fields are concentric. It folds in on its self. THE SAME SHAPE AS THE FIELDS MADE BY LEEDSKALNIN'S GENERATOR. You just have to spin it because in the rodin coil the pumping of current through the perfect geometry of the windings makes the rotating magnetic field.

Don't knock it till you try it.