Donald Smith Devices too good to be true

[Farmhand]

Yes enough of this already, another one making claims with no intention of
providing any evidence at all. Why make the claim if it is not to get people to
listen to you/follow you whatever. You people have a very simple mode of
operation, come to the forum, drop some names, make a claim and run off a
heap of words that have all been said before, there is some "obvious" truth to those
words, just enough, then when people ask a question you tell them to try this
or that or stop looking for handouts. Yet other people give the reaction you
desire and feedback praise and back-patting which in turn brings more heaps
of words. These heaps of words anyone can string together.

It all comes back to the same old story, if one person can claim a multi kilowatt
free energy device with no evidence at all, then we all can do it.
It seem's when people make a claim like that they can get other people to do
their experiments for them. I think it would be more productive if people did
their own experiments.

A thought from Tesla.
Show the video and let us decide if we think it is faked or not.

Far be it from me to try to tell others what to believe or experiment with, but
if it is a "claim factory" you want and encourage it is a "claim factory" you will get.

As in life in general, we all lay in a bed of our own making.

Cheers

P.S. If at any time one of these claimants shows some good evidence of the
claims, then I will eat my words, and apologize wholeheartedly and sincerely.

And as people may notice there is only one rhetorical question in this post, I
do not really want an answer to that question for myself so there is no question mark.

..

[ewizard]

Farmhand, I do not suspect dishonesty nor fakery with stoker_x1. I think it is more a matter of human nature or normal human psychology if you will that when a person achieves something exceptional most people will go through a process of asking their self what to do with this exceptional accomplishment. If you stop and think about it I think you will know some of the choices that will be made and tried. I won't expand on that other than to say it's very human to make the choices that we have seen people make time and again and we all expect to be paid or rewarded for hard work done - especially if it involves some new creative ways that no one else seems to have found success with. But eventually some very evolved soul will get the success everyone wants and it will be fully shared with all.

[OrionLightShip]

But eventually some very evolved soul will get the success everyone wants and it will be fully shared with all.

I am optimistic that something will happen when the time is right.

Or we could end up in FEMA camps or otherwise exterminated.

[harishsingh]

Kits available from Intalek

William Alek has documented his experiments in electrostatic generators and excess energy dissipation from spark gaps. Some of his experiments comes with kits. You could contact him if you want kits for a Don Smith setup if you want to go that route. He might be more than willing to obliage. This is not an endorsement of his website.

How to build Solid state electrical overunity devices

Multi-Spark Gap Experiments

[blackrobi]

My undrestanding of ratio 4:1 by stroke x1

I am a newcomer although I follow the forum for a while.

My understanding the ratio of 4:1 as mentioned by Mr. stroke x1 is this


You have a wire length ratio L1 and L2 4:1
example
L1 is 10 feet long then L2 is 2.5 feet long or
L1 is 8 feet long then L2 is 2 feet long or
L1 is 16 feet long then L2 is 4 feet long .....

then We have a wire dimension ratio L1 and L2 1:4
example
L1 is 4 gauge then L2 should have 16 gauge
L1 is 6 gauge then L2 is 24 gauge...

then We have matching the weight of L1 and L2 1:1
example
L1 is 3 pound then L2 is 3 pound
L1 is 0.5 pound then L2 is 0.5 pound....

Once again
wire length ratio L1 and L2 4:1
wire dimension ratio L1 and L2 1:4
wire weight ratio L1 and L2 1:1

And few thoughts for everyone.

Every people have a skill for something, one for sport other for engineering the third for something else.Every have a skill for something that could practice and understand better and deeper then the rest. That why we have different professions because people have different abilities. Everyone can learn different skills /with good TEACHERS/ but never as good as the person with natural one.To have a good mentor is a step forward.
Some of us is here to learn, the others could help in it - with own discretion.

THE FEW CAN TEACH THE REST COULD LEARN.

Regards blackrobi

[DilJalaay]

Stoker,

Thanks for the link to the DS book and also thanks for all you have shared. It all helps a lot!!

Best Regards,
David Fine

David, can you please upload that pdf to scrib and post here a link, as i can not access the posted link by stoker.

kind regards,
D.j

[dikpost]

Hi, all!
Dynatron's device in new P.Kelly book http://www.free-energy-info.co.uk/PJKbook.pdf pages 256-276.

[Jack Noskills]

Off topic post

There are good builders here and I feel this information needs to be spread. This device has resonance built in its geometry so you dont need to tune it. Very nice and reasonable explanation how it works, it is capable of producing huge potential differences. Beware that zipper gents...

Thread at OU: "Fountain Of Life" (Easy to understand!)
Information about the device: Redirecting...

[Duncan]

http://www.freeenergyinventions.bugs3.com/Smith2.pdf

Good luck.

[David Fine]

Don Smith Policeman

Farmhand,

From what I've been able to evaluate over the last year or so you are a very knowledgeable electrical person. It's my opinion that you might have already had a working Don Smith device if you'd spent your time building the DS device instead of playing the role of Don Smith thread critic and policeman. All of us would have been overjoyed to hear about your DS generator and here how you were able to get it to work. On the other hand, many of us are very tired of hearing from Farmhand the critical board cop. You and some of your buddies have caused a lot of grief to this board and broken friendships.

Best Regards,
David Fine

[David Fine]

Link

Hi Duncan,

Nice to hear from you!! Someone didn't want us to have that link. I'll load it to scribd and send you a copy too.

Best Regards,
David Fine

[nutgone]

Farmhand,

From what I've been able to evaluate over the last year or so you are a very knowledgeable electrical person. It's my opinion that you might have already had a working Don Smith device if you'd spent your time building the DS device instead of playing the role of Don Smith thread critic and policeman. All of us would have been overjoyed to hear about your DS generator and here how you were able to get it to work. On the other hand, many of us are very tired of hearing from Farmhand the critical board cop. You and some of your buddies have caused a lot of grief to this board and broken friendships.

Best Regards,
David Fine

Well said. I think a few here should seriously think where their energies are being directed.
You only get out what you are prepared to put in ( )

I got it fine, & have downloaded it (it's actually very interesting, as I have read much of Patrick's work, but there are one or two "gems" here that seem to have been missed in later publications, maybe things are just put in different terms).

If you want me to email it just send me a PM.

[nutgone]

BTW, I am now just waiting for my enamelled copper wire to show up now, everything else is here ready to start.

If any replicators in the UK are interested I got a good price on ready cut lengths of acrylic tube (on which to wind my coils). I've been told not to use PVC for high voltage high frequency, so I approached several companies with an order & picked the cheapest.
If anyone wants details just send me a PM & I will send you details of the company I used.
The tubes are all clear acrylic, 3mm wall thickness, various diameters all cut to required lengths with proper cutting equipment. They are extruded (no seam), & were well packaged & promptly dispatched.

I'm still waiting for a few bits from China, but I can start without them, just wish this winding wire would hurry up & get here!

Good luck all of you builders out there

If you want any more details of UK suppliers let me know, but mostly I just trawled eBay & went for cheapest.

[stoker_x1]

[boguslaw]

Question : what is the danger in using PVC for HV high frequency ?????

What about cardboard tube ?

Someone asked me about L3 coil. Zilano posted once a schematic which I liked very much because it was a proof of my concept about device which variation is used by Kapanadze also. Instead of using big step down transformer like Dynatron we can use L3 coil of copper tube or rod.

In my personal opinion this is the mistake everybody made about Kapanadze device. I think that copper tupe thick coil is not primary coil like in Tesla coil but it's output coil like in Zilano schematic. Think about it and everything will match.
I think Tariel and Don Smith both said and had shown enough to construct working device when you connect both info.

What are you waiting for , Christmas ?

P.S. I'm still looking for help with a fain spark generator, anyone ? did somebody constructed voltage multiplier ? there should be only a few ways to make faint sparks like in Kapanadze device, ony a few, so please help replicate faint spark device ,ok ? I'm trying and trying but my electronic ability are bad, need expert in kacher, slayer exciter or simply voltage multiplier (I have strange and interesting problem trying to step up voltage from Joule thief output - it stuck on first stage)