Apparatus for Utilization of Radiant Energy aka COP infinity circuit

[Guest]

Hi All,
I have been following the work of Dr. Stiffler and Luc and wanted to retest the circuit for radiant energy collection by using the 1N4148 diodes and an AV plug. I attached the circuit below. For the metal plate I've used two energy drink aluminum cans cut in half . For coils I've used primary and secondary of the old 1:1 transformer. I'm getting some where about 65 Volts. Neon light bulb is emitting light day and night, also I've been charging capacitors and batteries. If I add mass to the plate the voltage increases.

Regards,
Nenad

[Inquorate]

Absolutely Brilliant

Don't suppose you can upload a video to the tube so I can make it a favorite??

Awesome.

How elevated is the plate? What size uH chokes?

Nat1971a is going to wet himself.

[Joit]

Hi,
can you please upload the Picture from the Schematic again?
Doesnt work for me anyhow to view it, when i dload it, i only can see a kinda more black picture.

[Guest]

Don't suppose you can upload a video to the tube so I can make it a favorite??

Awesome.

How elevated is the plate? What size uH chokes?

Nat1971a is going to wet himself.

The plate is just fixed on my window. I don't have a meter to measure the uH of my coils. I'm busy right now but I've plan to post a video....

Regards,
Nenad

[nilrehob]

Hi All,
I have been following the work of Dr. Stiffler and Luc and wanted to retest the circuit for radiant energy collection by using the 1N4148 diodes and an AV plug. I attached the circuit below. For the metal plate I've used two energy drink aluminum cans cut in half . For coils I've used primary and secondary of the old 1:1 transformer. I'm getting some where about 65 Volts. Neon light bulb is emitting light day and night, also I've been charging capacitors and batteries. If I add mass to the plate the voltage increases.

Regards,
Nenad

Have you turned off the main power to the house when testing?

/Hob

[Guest]

Hi,
can you please upload the Picture from the Schematic again?
Doesnt work for me anyhow to view it, when i dload it, i only can see a kinda more black picture.

Here it is in gif format...

[EgmQC]

@nenadilic84,

Do a simple test, just use half of your schematic, earth ground->coil->av plug or the other half. Hook a scope probe at the end of the av plug and now tell me what is the frequency of the half wave displayed on your scope ? Ive done exactly what you have done, but the frequency resolve what happen, 60hz.

Best Regards,
EgmQC

[Guest]

@nenadilic84,

Do a simple test, just use half of your schematic, earth ground->coil->av plug or the other half. Hook a scope probe at the end of the av plug and now tell me what is the frequency of the half wave displayed on your scope ? Ive done exactly what you have done, but the frequency resolve what happen, 60hz.

Best Regards,
EgmQC

You are probably right . I have to do more testing....

[Guest]

@nenadilic84,

Do a simple test, just use half of your schematic, earth ground->coil->av plug or the other half. Hook a scope probe at the end of the av plug and now tell me what is the frequency of the half wave displayed on your scope ? Ive done exactly what you have done, but the frequency resolve what happen, 60hz.

Best Regards,
EgmQC

HI EgmQC,
I did some test and it's not from the power grid as you ware saying.... Even if I, instead of the earth ground, connect the lead to minus of the battery I still get some voltage. It is smaller but noticeable. So I suggest that some one here replicate this by bearing some big metal piece in the ground and use it as an earth ground. I also forgot to mention that I'm living on the 8 floor and that is maybe the reason of getting the 65 volts. Tesla in his articles noted that potential difference (voltage not energy potential of the solid object) increases with height. So if some one is capable of replicating this please do so and we can see what is going on here...

Regards,
Nenad

[Joit]

Here it is in gif format...

Thanks a lot. This one works well.

[Armagdn03]

@nenadilic84,

Do a simple test, just use half of your schematic, earth ground->coil->av plug or the other half. Hook a scope probe at the end of the av plug and now tell me what is the frequency of the half wave displayed on your scope ? Ive done exactly what you have done, but the frequency resolve what happen, 60hz.

Best Regards,
EgmQC

this means your scope is not properly grounded

[blackchisel97]

elevation

I'm living on the 8 floor and that is maybe the reason of getting the 65 volts.

This maybe the factor. Potential will be higher with vertical rise of the wire(distance from the ground). Good Earth grounding is also important.

http://keelynet.com/tesla/00685957.pdf

http://www.nuenergy.org/alt/tesla_energy.htm


Vtech

[cody]

Nenad,
Thanks for posting this I have done some experiments with that old tesla patent a while back but my results were very poor. I just threw together your design and already am getting better results than i did before, not to mention that im not even above ground yet(in the basement). I beleive the big difference is in those diodes, i had been searching for a good one, but this one seems to be working pretty well. Not sure how much difference the chokes are making yet, more to test. My results are no where as good as yours, still below a volt, but its charging caps and staying constant so it looks promising; i hope i do much better when i get out of the basement and get the plate elevated. Anyways, thanks again.

[EgmQC]

this means your scope is not properly grounded

@Armagdn03

I used a handled one.

Best Regards,
EgmQC

[EgmQC]

I just did the same test just to be sure, same result with all scope.

Lecroy 500Mhz 9354AM
Tektronix 100Mhz 2245a
Velleman 10Mhz HPS10

with only a AV Plug connected to a mass, same result with earth ground.

I hope more will do the same test, it take 1 minute to do.

Best Regards,
IceStorm