Imhotep's Radiant Oscillator Video

[nat1971a]

I think this may be the same material from gerrys book.....about a third of the page down....where its says LOST SCIENCE by gerry....there is a lot of good info there especially about the cylinders which i posted earlier

Nikola Tesla - The Complete Patents of Nikola Tesla - The Man who invented the 20th Century

[broli]

I can't help with the cool stuff that you guys are doing but I can help with indirect stuff. I found a version online of the book. But before I share it (through pm due to legal issues). I'm remaking the bookmarks as it's just a mess of random things now. So it'll be up soon.

[Bodkins]

Come on someone find the book!!!CHEERS ARRON
Lidmotor try miss spelling oscilloscope on ebay i got one for a steal.
Got some rheostats and germaniun tranyis coming
With the kick start setup the frequency charge when i move around it im not touching it but it changes,Mad or What.

[Aaron]

hv effects

IT IS WAY OUT TOO EARLY TO CLAIM THIS - but I think somehow this HV emmitions created a resonance in other objects, even their resonance were different. How this could be possible I do not know and this phenomena has not been duplicated or verified. I got seriousiously scared when I found everything charging up with voltage and my computer/phone acting strange.

My first guess is that the HV projections are simply using all those objects as conductive paths to earth ground. But maybe not.

If those things are remaining charged after your circuit is off, then that has been seen by Tesla and others too. There have been results like this where all the metal objects even in different parts of the building have become magnetized and that magnetism held. Different from electrical charge like with HV shocks.

If you haven't read Secrets of Cold War Technology by Gerry Vassilatos, I would highly recommend reading chapter 1 on Tesla. That one chapter I believe explains just about everything that I have read on this thread...almost.

That book was used as a "Rosetta Stone" to basic concepts of the Gray Patents.

Used copies are about $200 on Amazon but you can find it elsewhere.
Maybe spiral bound avail here:
TeslaTech Resource Center |Secrets of Cold War Technology | 220037

You might find it online somewhere. It is the only thing I really ever read on Tesla and it connected the dots on just about everything.

[Lidmotor]

"Kick Starter" Circuit correction

Slayer-- Here is the circuit that I used yesterday. You might have to go back to the original Aromaz circuit posted earlier, get it running, and then start pulling parts off. Your ignition coil might be alittle different. Also this would only run if I had the right CFL configuration. I think that it is an impedance thing. Try hooking different bulbs together in series. The variable resistor (rheostat) was a must to control the drive power. You can probably use a 12 volt tail light bulb instead and get it to work.

Bodkins-- I will be trying ALL my tricks on this thing. This is very exciting. When I read Aaron's comments about charging a cap with one lead it really got me thinking of the possibilities here. I may go back to the original circuit with the 2n2222 and study this negative resistor idea. I am going to have to get a scope. This is very frustrating not being able to see these wave forms. It is like being inside the boat in a storm-- you can hear the waves but you really want to see what is happening---as scary as that is.

Aaron and Ren-- Your input here is much appreciated by everyone envolved. Ren you had excellent words of advice about cleaning things up a bit to rule out wrong conclusions. Repeatability is very important or this is just a waste of time.

Aromaz--- I am anxious to see your videos.

Nat--- I will start on the receiver this week.



Lidmotor

PS---PS---PS!!!!!! There is an error on the below circuit!! There is no connection between the base of the second transistor and the collectors. SOOO SORRY for the mistake. I will post the circuit again without the mistake.

Here is the correct circuit without the connection from the base to the collectors. Sorry for the mistake. It is wrong in the video also.

[theremart]

555 dump of the Imhotep's relay.

Just finished this video..

http://www.youtube.com/my_videos

Nice to be able to start getting more control over the 555. But the strange thing is to me is when I turn on the relay the rate of the 555 goes up.... From watching other people usint the 555 it seems that it is sensitive to other circuits around it...

I now have the solar powered Solid State Bedini running 24/7 with a fuse it is very sweet to have multiple batteries on the backend all charging up at the same time.

[slayer007]

Thank you Lidmotor

I'll be trying this today.
I'd like to see adout picking up the BEMF from the coil.
Great work guys thanks to every one.

[Lidmotor]

Kick Starter

slayer007 connect the base to ground or a anntena and the jump start


Hi Lidmotor,

When the intake and exhaust of these circuits are matched just right for the most pressure, you will get this. I'm excited about all of your and everyone else's discoveries here in this thread. I haven't kept up on it super close but I glance it often. A convergence is afoot
Today 08:51 AM

lidmotor remenber the cap you had a long time ago connecting the front and the backend rheostat on the back too??????????


RealityMaker niceone looks like a crazey switcher

Slayer-- Here is the circuit that I used yesterday. You might have to go back to the original Aromaz circuit posted earlier, get it running, and then start pulling parts off. Your ignition coil might be alittle different. Also this would only run if I had the right CFL configuration. I think that it is an impedance thing. Try hooking different bulbs together in series. The variable resistor (rheostat) was a must to control the drive power. You can probably use a 12 volt tail light bulb instead and get it to work.

Bodkins-- I will be trying ALL my tricks on this thing. This is very exciting. When I read Aaron's comments about charging a cap with one lead it really got me thinking of the possibilities here. I may go back to the original circuit with the 2n2222 and study this negative resistor idea. I am going to have to get a scope. This is very frustrating not being able to see these wave forms. It is like being inside the boat in a storm-- you can hear the waves but you really want to see what is happening---as scary as that is.

Aaron and Ren-- Your input here is much appreciated by everyone envolved. Ren you had excellent words of advice about cleaning things up a bit to rule out wrong conclusions. Repeatability is very important or this is just a waste of time.

Aromaz--- I am anxious to see your videos.

Nat--- I will start on the receiver this week.



Lidmotor

PS---PS---PS!!!!!! There is an error on the below circuit!! There is no connection between the base of the second transistor and the collectors. SOOO SORRY for the mistake. I will post the circuit again without the mistake.

[Bodkins]

slayer007 connect the base to ground or a anntena and the jump start


Hi Lidmotor,

When the intake and exhaust of these circuits are matched just right for the most pressure, you will get this. I'm excited about all of your and everyone else's discoveries here in this thread. I haven't kept up on it super close but I glance it often. A convergence is afoot
Today 08:51 AM

lidmotor remenber the cap you had a long time ago connecting the front and the backend rheostat on the back too??????????


RealityMaker niceone looks like a crazey switcher

[slayer007]

I had good safe fun all day today playing with the circuit. I finally got down to just (2) transistors and named the circuit "Bodkins Kick starter " because of the way it has to be jolted into running. It is amazing that all this designing is happening because we were burning out parts.

YouTube - Bodkins Kick Starter 2 Transistor CFL circuit

Lidmotor

Great Video Lidmotor
Could you please post the circuit.
I tried it but I must be doing something wrong.
I couldnt get it to self oscillate the light would just come on for a second when I tried to jump start it.

[RealityMaker]

Hi this is my fist post, although I kept reading topic from its first days. I would like to thank you all for sharing your ideas. Please have a look at this [url=http://www.hohlov.nnov.ru/] it looks familiar to idea used in Aromaz circuit.

[Aromaz]

Thanks Gnino

in different setup of Aroma circuit i found this scope shot

I an very happy to see more scopes around. I am trying to get this more analyzed. Though your first photo show fairly standard shot, what the heck does the second photo? There we seems to have an inverted wave what I found but then a kind of echo? and the extreme spike.

What circuit did you use there - if you do not mind?

[Aromaz]

Wave Form

Aaron or someone else.....

Could someone with more 'know about' please explain for me what they see / understand or suspect when looking at the original 'Galloping Kangaroo" wave form - see my posting # 1293

Then the same basic wave form is also present in the photo on posting #1337, but with incredible spikes. The spikes I understand, but I am sure the exact wave form will tell us an interesting story.

There seems to be two kicks, on slower about 30% upwards, and about 70% up there is another rise which flats off a bit before it climbs more. Then also the 'sea wave' effect of some two or thee higher waves and many smaller waves in between. These waves are us begging to tell their story! Truely even in my dreams they disturb my peace.

[Aromaz]

Magnitized

Hi Aromaz,

Can you see if anything in the vicinity of that ignition coil has become magnetized? Paperclips, staples, etc... any small things like that? And if so, from how far away?

SORRY Slap me inthe face!! Oversight from me yesterday - A VERY STUPID oversight because my ultimate hope is to get magnets occillate i.e. Floyd Sweet. I was not too well nearer to end of day.

Will run same setup again in about two days. What was a fact is that it seems everything - even loose lying copper cables on the table got electrically ( ? Static ?) charged. Gave small spike and bite when I touched them When I walked with the scope and probe, all metal objects - even aluminum bowls, acrylic and steel sheet emmited stronger resonance/oscillations when I bring the probe near to them - voltage, though in various wave forms and frequencies. IT IS WAY OUT TOO EARLY TO CLAIM THIS - but I think somehow this HV emmitions created a resonance in other objects, even their resonance were different. How this could be possible I do not know and this phenomena has not been duplicated or verified. I got seriousiously scared when I found everything charging up with voltage and my computer/phone acting strange.

Today I am back at original Imhotep Radiant Oscillator and redo some of the experiments just to make a series of video for my own and publish from me on YouTube of the items I have changed or different findings than those published by our excellent partners here on Energetic Forum.

[Aromaz]

Wikipedia

That is what happens when you participate in an encyclopedia based on majority vote...it overrules facts or reality.

Tell me exactly how to contribute to give my KEEP opinion versus their DELETE? I looked at it:
Wikipedia:Articles for deletion/Dynamic Resonance Theory - Wikipedia, the free encyclopedia
but didn't see where I could give my vote.

Skip it, they will delete - not said by them, I only saw later - because it is ORIGINAL CONTENT and not PROVEN. I am moving it over to the more experimental side-leg of "WikiInfo"

But I kind of liked the insults, made me feel more worthy to sit at the feet of Master Tesla and others.