Imhotep's Radiant Oscillator Video

[Jetijs]

If that is indeed so and someone else can verify this (I am not calling anyone a liar here), then it is true overunity and one of the most amazing thing I have seen. Big thanks to Aromaz for his incredible work. He has inspired me to catch up with the amazing work on this thread and to start experimenting on this again. So much to do, so little time.

[Inquorate]

Transistors

I have a theory about what happening to our transistors. Essentially same thing that happening to batteries..

Basically a N-P-N transistor is made up of a conductor (N) -the collecter, a semi-conductor (P) -the base, and another conductor (N) -the emitter.

The semi-conductor has minuscule holes in it, about the size of electrons.

Electricity wants to flow from N through P to N. It can only do this when voltage is supplied to it, and electrons fill up the holes of the semi-conductor, allowing current to flow. By using a square wave, we are able to get the short sharp shut off of pulsed voltage, that speeds ahead of the electron flow which bunches up at the instant of switch closure. Thus we are able to cause concussions in the aether of the smaller aether (pure voltage) which behaves as an incompressable gas.

The semi-conductor (P) does not initially become affected by these pure radiant pulses, as the aether particles are too small to plug up the holes. Hence the system won't pulse from radiant energy to begin with.

But when we condition the atomic lattice of the semi-conductor with electron current super saturated with above normal concentrations of the smaller aether particles, say, from an imhotep fan like I did, then we begin changing the atomic latticework of said semiconductor and just like conditioned batteries that more readily accept the 'fluffy' charge of pure voltage saturated electron current...

the P in the N-P-N begins to react to longitudinal compression waves of the aether that it itself is causing by being able to switch off on off on at high frequencies, giving square wave dc pulses.

HOWEVER, and unfortunately for us, one of two things are happening;

1: the semiconductor becomes saturated with aether particles - does the high voltage field picked up by lidmotor's christmas light tester grow over time or does the space he is working in become saturated with this field with more ease over repeated experiments? - I myself noticed my transistor driven ignition coil continued to oscillate at about 40hz when it was supposed to be off -
Therefore, does the semiconductor start getting to the point where it stops switching entirely off, reducing the square wave to a sine wave and thus reducing the bunching effect - so Aromaz's high voltage wire from coil stops going below room temperature etc.

2: OR, (or perhaps and then) does the semiconductor saturate or have atomic lattice altered to the point that the electron holes become so small that electrons won't pass, and we have a dead transistor.. ?

To whit: maybe we should try P-N-P transistors? Although I have a feeling they won't respond to 'positive' aether waves, I have long suspected that electron current causes two flows of aether current, one slightly negative, mostly neutral aether particle flowing back through the system (ie from ground) - this would be the smaller of the two 'lighter than hydrogen' atoms predicted by mendeleve's equations, by virtue of the size needed to flow back thru a system.

The other predominately positive aether particle travels along, caught up in electronic flow and 'stuck' to it by virtue of opposite charge. We can separate these two 'at the instant of switch closure' because the small aether particle can travel virtually instantly at least the speed of light, while the larger electron takes a while to get going, and unless hugely impacted in a high energy collision in a vacuum, ie how X-rays are made, will crawl along thru system at an inch an hour or whatever. I believe this is why the P in N-P-N has to be wafer thin, and is the reason for the fraction of a nanosecond it takes for transistor to switch off or on.

@bodkins, this two particle flow in opposite directions is the 'theory' I alluded to in page 2 and 3 of earth battery thread, when we were trying to work out how/why two diodes - one to ground, one from ground - seemed to increase brightness of neon from capacitor that was being charged over air gap from pulsing wire coming for ignition coil.

I believe that a diode can partially shut off the larger mostly positive aether particle's flow (looking at what happens to transistors, at least for a while, until semiconductor material is eventually rendered ineffectual) but cannot shut off flow back thru system of mostly neutral aether particle, which tries to fill in the gaps between longitudinal compression waves of positive aether particles. This explains how the 'natural medium' can have longitudinal compression waves, and still 'behave as an incompressable gas'.

Remember, tesla said 'behaves as', not 'is'.

Any compression waves of larger aether particle travelling out will cause smaller particle to tumble/flow IN, thus each stream of particle induces a flow in the other. When we momentarily block one in the dual diode setup, we don't block the other, & thus the one we are blocking has other particles that haven't been 'blocked' rush in to fill the gap. This 'extra' flow only happens around the diode's superconductor or the point of blocking. Then this 'extra' flow grabs more electrons from the wire....

Viola, the neon is brighter.


So to conclude this rambling, we can condition transistors & diodes like we condition batteries. They will for a while 'switch' at radiant impulse & eventually saturate & stop being able 2 shut off as quickly, & we lose our effects.

so, I'm going to use vacuum tubes. Semiconductors no good, but helped me understand exactly what's happening, hope can use knowledge..

[gotoluc]

Aromaz, this is SOO amazing
So much light on this much energy input. Even if the system consumed miliamps instead of microapms, it would still be SO amazing. That means that you are lighting up to 100w worth of light using virtually no power at all. You could light this up from some AAA batteries Interesting that on 24V you get the coil to heat up, that is also a form of energy you know And I doubt that you could do this with microamps in conventional way.

Thank you for sharing.
Can somebody please send me a circuit for this or point me to the exact forum page where it is already posted? Thank you.
You guys have done an excellent job!

I also agree with you Jetijs that heat would also be great I wouldn't mind heating my hot water as I light my home

Most excellent news

Thanks for sharing

Luc

[Hoppy]

Hi all

I tried Aromaz single coil setup with two CFL lamps, 4 transistors plus 2N2222 tonight and it fires up every time and I can smell the ozone and can draw long plasma like arcs. However my current as measured on my AVO8 analogue meter is around 150mA @ 24v = 3.6W. This current looks to be about what I would expect for the level of brightness I can get from the two lamps. I've tried reducing this with an adjustable spark gap but cannot get it lower without a corresponding reduction in brightness. Is anyone else having this problem? My earth only slightly increases brightness, so I'm wondering if the type of earth is very important in order to run the lamps like Aromaz at just a few microamps.

Hoppy

[Jetijs]

Thank you slayer007

[slayer007]

Aromaz, this is SOO amazing
So much light on this much energy input. Even if the system consumed miliamps instead of microapms, it would still be SO amazing. That means that you are lighting up to 100w worth of light using virtually no power at all. You could light this up from some AAA batteries Interesting that on 24V you get the coil to heat up, that is also a form of energy you know And I doubt that you could do this with microamps in conventional way.

Thank you for sharing.
Can somebody please send me a circuit for this or point me to the exact forum page where it is already posted? Thank you.
You guys have done an excellent job!

There's a circuit back on page 43.

[mlurye]

[QUOTE=Bodkins;36932]@mlurye
Thats brillant,

Yes it does sound brilliant Sounds like Moray invented radio that is able to produce kilo watts of energy

[Jetijs]

Aromaz, this is SOO amazing
So much light on this much energy input. Even if the system consumed miliamps instead of microapms, it would still be SO amazing. That means that you are lighting up to 100w worth of light using virtually no power at all. You could light this up from some AAA batteries Interesting that on 24V you get the coil to heat up, that is also a form of energy you know And I doubt that you could do this with microamps in conventional way.

Thank you for sharing.
Can somebody please send me a circuit for this or point me to the exact forum page where it is already posted? Thank you.
You guys have done an excellent job!

[Bodkins]

Bodkins, A bit late, I just looked at your video "Big Sparks"
check your coil - the insulation 'bakelite' - it is possible (likely) that the insulation around the HV terminal is cracked. That is usually where you had problems in the old days - car engine not starting.

@mlurye
Thats brillant,

@Aromaz I also have diso lights with my setup looks like its feedback of the energy.
Yes it is the insulation is crap but its the back radiant energy because of the potential in the coil with the inverted setup it gos to the postive of the battery (make and break) its the biggest spark I get.
Im Working on new way of pumping stuff around,
Will rep your stuff and post soon too I need shades by the looks of it!
For tomorrow

[gotoluc]

YouTube - Aromaz 017 – Dual DRE test run on 24Vdc

BUT BE AWARE: I am running on 24Vdc only for short period. 19.4 Vdc get to coil terminals - the coil is in effect OVERLOADING. After some 20 to 25 minuts the coil is hot and I can hear sparks flying inside - also lights get some real strong spikes. After about 30 minutes, frequency drops to under 30 hz and lights are flashing like disco.

Excellent work Aromaz ... just microamps for all those bulbs

I saw your video and did not realize you were a member here. I sent you a message through youtube requesting a circuit diagram to which you can ignore as you maybe posting it here.

I would like to replicate your setup and wanted to know if the transistors are just all hooked up in parallel?

Thanks for sharing

Luc

[mlurye]

Here is link I found that does look interesting Thomas Henry Moray: Speech at Valley State College, Northridge CA.

Especialy I was interested in this part:
"Oscillations by synchronization are started in the first stage of the circuit of the device by exciting it with an external power source such as the difference of potential between two points. The circuit is then balanced through synchronization until the oscillations are sustained by harmonic coupling with the energies of the Universe. The reinforcing action of the harmonic coupling increases the amplitude of the oscillations until the peak pulses "spill" over into the next stage through special detectors or valves which then prevent the return or feedback of the energy from the preceeding stages. These oscillating pulsations drive each succeeding stage which oscillate at a controlled frequency and which are again reinforced by harmonic coupling with the ever present energies of the Cosmos. That is, the first stage drives a second stage, the second stage driver a third and so on. Additional stages are coupled or until a suitable power level at a usable frequence voltage and amperage is obtained by means of special resonant oscillators."

[Bodkins]

YouTube - Bodkins 35 diode ground.AVI


WHAT MORE CAN I SAY.
Aromaz Looks Like you ARE resonance with the planet

[ashtweth]

Hi, Corrie

Thanks for all your hard work, its now included along with Bodkins and lid's new stuff in there..Ren is next after we sort some bugs

http://www.panaceauniversity.org/Tesla%27s%20HV%20impulse%20lighting%20methods-Imhotep%27s%20Radiant%20Oscillator.pdf

Ash

[Aromaz]

YouTube - Aromaz 017 – Dual DRE test run on 24Vdc

BUT BE AWARE: I am running on 24Vdc only for short period. 19.4 Vdc get to coil terminals - the coil is in effect OVERLOADING. After some 20 to 25 minuts the coil is hot and I can hear sparks flying inside - also lights get some real strong spikes. After about 30 minutes, frequency drops to under 30 hz and lights are flashing like disco.

[Aromaz]

Bodkins - Big sparks

Bodkins, A bit late, I just looked at your video "Big Sparks"
check your coil - the insulation 'bakelite' - it is possible (likely) that the insulation around the HV terminal is cracked. That is usually where you had problems in the old days - car engine not starting.