Announcement
Collapse
No announcement yet.
Imhotep's Radiant Oscillator Video
Collapse
X
-
Nat's Mystical System
I do not think you have to worry too much - yet. There are two possible scenarios to keep in mind.Originally posted by nat1971a View Postwell i am over the 1hr 48minutes and nothing notable to report....maybe it takes longer in a smaller system....i will run it for a bit longer....otherwise i will add in bodkins modfications....
A: The coil might not be exactly the same.
B: The auto conditioning' effect of just about everything.
On Sunday I tested ALL my previously dead transistors - except for one that really smoked; they were all back to normal - and in 'like new' - but keep in separate box!
With my scope and toroid modified probe, I find after running for one hour, the ignition coils are still resonating as much as 12 minutes after power down. Further, in older used (in circuit) ignition coils I get ringing much easier and persistant than in brand new coils.
Leave a comment:
-
well i am over the 1hr 48minutes and nothing notable to report....maybe it takes longer in a smaller system....i will run it for a bit longer....otherwise i will add in bodkins modfications....
Leave a comment:
-
thanks aromaz...theres only one way to learn...is by breaking stuff.....pushing the boundaries....while maintaining safety....keep up the good work everyone.....i feel like we are so close to coming up with a breakthrough....
ETA 6 minutes
Leave a comment:
-
Good news to have you back in action!Originally posted by nat1971a View Postok my system is running now at 36volts....will check it at 1hr 48 minutes and at 3hrs....fingers crossed...nothing explodes
@broli: The problem we have is that all electronics / circuits do 'work' and indicate the traditional way - From Positive to Negative. For instance the arrow/band on the diode points away from the positive thought he flow is actualy the other way!
But we should keep this in mind when we design/test our circuits. Where I am playing with long dual winded coils it is a remarkable difference when connecting a light closer to the negative side than to the positive side of that coil!
The bottom line is: It is confusing to say the least; But something we should always consider. Somehow we have to consider wrong to do right or is it we have to do right to be wrong......
Leave a comment:
-
ok my system is running now at 36volts....will check it at 1hr 48 minutes and at 3hrs....fingers crossed...nothing explodes
Leave a comment:
-
It's really good you brought this up. I get confused a lot when looking at circuit diagrams, I think most electronic diagrams have to be read from the negative source this is why there's a nice diagram in all devices showing you which way to put the batteries. So in these experiments (or maybe just all electric) it could be beneficial to think in electrons and forget about standardized current flow. When something is old and wrong replace it by something new and correctOriginally posted by Aromaz View PostElectrons does not flow from Pos to Neg in a battery or circuit, in reality they flow from Negative to Positive. For more info you can get a number of websites, but probably one of the better descriptions are at:
Conventional vs Electron Flow
.
Leave a comment:
-
@ Bodkins: Thank you for that schematic update.
@Lidmotor: Very nicely done and unique as gift.
@All: There is something I would like to share, I did mention this before and this is a very important issue for us to keep in mind.
This will also explain whay we sometimes get higher "output readings than input". Today I had some people coming to show me a 'fantastic overunity' item - measured by multi-meters, but it can not run on its own supply.
Electrons does not flow from Pos to Neg in a battery or circuit, in reality they flow from Negative to Positive. For more info you can get a number of websites, but probably one of the better descriptions are at:
Conventional vs Electron Flow
Leave a comment:
-
@bodkins /all
waves back!!!
thats awesome!!!....i was thinking of running my system to test teslas 1hour 48 minute test to see if we get reflections back from the aether......if i see anything i will post a video....i havent run my system for any longer than 5 minutes except for last week...when i had a melt down
i will check out your circuit as well
good work.
cheers
nat
Leave a comment:
-
Lidmotor Christmas CFLs--circuits
Hi Carl,
The circuit and instruction to build the diposable camera CFL are here:
Fluorescent Light. How to build a 4-Watts Fluorescent light using a disposable camera, powered by one 1.5 Volts battery. (5/29/2006)
The site where I got the ready made circuit board for the larger CFL is at ElectricGoldmine.com. Ren turned me onto this one. The link is back a few pages here at this thread. It is a micro Tesla coil driver circuit for about $5. It did not work all that great as a Tesla coil setup but it made a neat little modified CFL driver.
Micro Tesla Coil, five dollars
LidmotorLast edited by Lidmotor; 12-22-2008, 08:49 PM.
Leave a comment:
-
Very nice gifts Lid,
Please post the schematics, those are very useful items.
Thanks
Carl
Originally posted by Lidmotor View PostHi I have been busy making a few things for Christmas. I have also been keeping up with the progress here and it looks like slow and steady -- but we are getting there. The things that I made are just standard flourescent circuit lights but they do give off energy just like what we are building with these new circuits. I used my little HV tester on them. I don't show it in the video but I made a energy recovery cap pulser circuit on the larger one. It ran off a wire wrapped around the bulb just like Bodkins showed months ago.
Happy Holidays. Here is a look at the things I made.
YouTube - Lidmotor Christmas CFLs
Lidmotor
Leave a comment:
-
Lidmotor Christmas CFLs
Hi I have been busy making a few things for Christmas. I have also been keeping up with the progress here and it looks like slow and steady -- but we are getting there. The things that I made are just standard flourescent circuit lights but they do give off energy just like what we are building with these new circuits. I used my little HV tester on them. I don't show it in the video but I made a energy recovery cap pulser circuit on the larger one. It ran off a wire wrapped around the bulb just like Bodkins showed months ago.
Happy Holidays. Here is a look at the things I made.
YouTube - Lidmotor Christmas CFLs
Lidmotor
Leave a comment:
-
-
On the subject of waves.........
Every 7th wave is larger, every 49th wave is a larger yet....then you get into the rogues.
The numbers 3 and 4 are important to nature......
3 + 4 is seven (big in waves and gambling)
3 X 4 is 12 ( big in gambling and apostles)(segments in grapefruit etc)
3 based rhythms superimposed on 4/4 time......very cool
And don't forget the golden ratio.....1.6 to 1
Carl
Leave a comment:
Leave a comment: