2019 Energy Conference

[BroMikey]

Dang, is that thing ever nicely done. Put them guys together and lets
see them power a 50,000 watt building I love it.

What a beauty sparkgap.

[Aaron]

DeMeo's Cosmic Ether Exists & Orgone Energy Accumulator

* NEW RELEASE * JAMES DEMEO, PHD - TWO PRESENTATIONS ON ETHER AND ORGONE

We're honored to have Dr. James DeMeo present at the 2019 ESTC. He is one of the world's leading authorities on Wilhelm Reich, which includes the science of Orgone - a form of energy that is crucial to life, it is able to be cultivated and even used to assist biological systems, which you'll see.

NOTE: Keep in mind that the introductory special expires in 48 hours. You can get BOTH videos for only $3 more than the full retail price of one presentation!

His two presentations are: Cosmic Ether Exists: Correcting a Major Error in Modern Science and The Orgone Energy Accumulator: Experimental Confirmations and New Water-Structuring Evidence





Get your copies here: Cosmic Ether Exists: Correcting a Major Error in Modern Science and The Orgone Energy Accumulator: Experimental Confirmations and New Water-Structuring Evidence by James DeMeo, Ph.D.

The first is an overview of the ether and then an insurmountable volume of facts and data that cannot be refuted regarding the reality of the ether. These verifications have been going on for a century and continue to this day but chances are that you've never heard of them - possibly because it disproves Einstein's ether-less Theory of Relativity in a very simple and wholesale manner. This presentation is so important that it should be required study for anyone to graduate from high school because the facts presented literally change everything regarding the foundation of physics starting with time and space and everything built upon that.

The second covers many verifiable facts about the orgone energy discovered by Wilhelm Reich who was Sigmund Freud's #1 student. This presentation is required study for any interested in the forces of nature. The simple orgone accumulator built correctly can violate thermodynamics in a number of ways and the most tangible is the fact that inside of it, even if the door is open, a warmer temperature is measurable, which never comes into equilibrium with the surrounding temperature! If you want to delve into a self-organizing, negentropic device, then this is it and it is very simple to build and demonstrate.

WATCH THE FREE EXCERPTS ON THE WEBSITE! There are three - two are excerpts from each of the presentations and one has excerpts from a panel discussion at the conference with discussions of the orgone energy. When you hear what Eric Dollard's personal experience was building a small orgone accumulator and experimenting with it, it will simply blow your mind!

Get your copies here: Cosmic Ether Exists: Correcting a Major Error in Modern Science and The Orgone Energy Accumulator: Experimental Confirmations and New Water-Structuring Evidence by James DeMeo, Ph.D.

It is highly recommended to get a copy of Dr. DeMeo's books The Orgone Accumulator Handbook and Heretic's Notebook. These are PERFECT companions to the presentations.

https://www.amazon.com/gp/product/0980231639?ie=UTF8&tag=maimounas-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=0980231639

https://www.amazon.com/gp/product/0980231655?ie=UTF8&tag=maimounas-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=0980231655

[Aaron]

The secret power source of overunity switched reluctance generators

THE SECRET POWER SOURCE OF OVERUNITY SWITCHED RELUCTANCE GENERATORS

The Secret Power Source for Over Unity Switched Reluctance Generators by Jack Hanlon, Ph.D.



Jack Hanlon, Ph.D. believes over unity electrical machines have been built and even demonstrated many times at the ETSC and other places; however, he has never heard a complete explanation of “how they work” that will stand up to the skepticism of a conventionally trained mathematician, physicist or engineer.

The explanations always seem to involve some “mysterious” source of power or slightly nebulous use of magnetism.

The missing piece is always: what is the source of the extra power?

Since we have been unable to answer this question in a satisfactory way, the technology is put in the realm of “voodoo” science, and it is not seriously considered by the larger traditional scientific community.

He believes this holds back the wide spread and rapid development of this important technology and limits the developers to a small community of experimenters.

Switched reluctance generators have always been a prime candidate for overunity results. Eric Dollard who is very skeptical about any "free energy" claims was originally brought into Borderlands years ago to verify a switched reluctance generator built by Peter Lindemann and Michael Knox. Accounting for a sufficient margin of error, Eric Dollard found that it did indeed produce more work than it took to run the machine!

This is probably the most comprehensive analysis on where the free energy is in such machines and it is done in a relatively simple and eloquent manner with simple algebra and geometry.

If this technology is “real”, and he believes it is, then we should be able to give a solid and complete explanation for it based on traditional physics, mathematics and engineering principles.

You will get more than theory; you will get very specific examples of converting reactive power to real power by a former Los Alamos National Labs scientist and former university math teacher!

That is the goal of this presentation. Jack Hanlon thinks David Squires put it well in his 2012 ETSC conference presentation. He said: “You can’t engineer what you don’t fully understand”.

The Secret Power Source for Over Unity Switched Reluctance Generators by Jack Hanlon, Ph.D.

[Aaron]

* new release * longitudinal & scalar waves: The biquaternion generalization of maxwe

* NEW RELEASE * LONGITUDINAL & SCALAR WAVES: THE BIQUATERNION GENERALIZATION OF MAXWELL’S EQUATIONS BY ROBERT HARALICK, PHD.



Longitudinal & Scalar Waves: The Biquaternion Generalization of Maxwell’s Equations

In the last few years, Prof. Haralick became interested in subtle energy research but many of the experimental results were not explainable by the common paradigm. Some of his work in this area was presented at the last couple Energy Science & Technology Conferences.

It became apparent to him that there should be a theory that can begin to explain some of this unusual phenomena.

His interest was primarily focus on whether or not Maxwell’s Equations could be generalized so that it could be used to explain some of this work specifically including the type of work Tesla was involved with in the early 1900’s regarding longitudinal waves.

Get your copy here: Longitudinal & Scalar Waves: The Biquaternion Generalization of Maxwell's Equations by Robert Haralick, Ph.D.

Prof. Haralick will walk you through a very specific sequence of segments that include:

James Clerk Maxwell – an interesting biographic sketch that quite likely, many mathematicians and engineers have not heard of.

The Maxwell Equations in Modern Form – a general review to set the stage for a comparison of the rest of the presentation.

Maxwell’s Original 20 Equations – this takes you back to the original 1865 paper that he had before he wrote his treatise. Prof. Haralick has a strong intent to figure out what was in those equations in the way that Maxwell wrote them because what many people have said is that what Maxwell had in his equations are not the same as what the Heaviside-Biggs Equations are that are currently used.

Quaternions – this goes into the quaternion algebra, which sounds complicated but if you have any background in the most basic high school algebrea, you’ll understand quite a bit of it.

Quaternion Generalized Maxwell Equations – you’ll then be walked through the derivation and this derivation admits to a longitudinal electric wave along with the scalar wave and this type of “scalar wave” will most likely shock you. So far this comprises a little less than half of the presentation.

Tesla, Galinas, Zimmerman, & Hively – the rest of the talk regarding the work of these men, what they built and what they wrote that is relevant to this kind of generalizaton as well as other related topics. Some of the material covered in this section may reveal to you some thing that you have not previously realized – especially regarding Tesla’s work.

Get a copy of this presentation so you can have an authoritative analysis of Maxwell’s Equations that reveals a very specific type of “scalar wave”, which not been openly discussed in any literature on the subject.

Get your copy here: Longitudinal & Scalar Waves: The Biquaternion Generalization of Maxwell's Equations by Robert Haralick, Ph.D.

[Aaron]

AETHER WEIRDNESS - IT'S ABOUT TIME by Paul Babcock

NEW RELEASE - AETHER WEIRDNESS - IT'S ABOUT TIME. MAGIC BATTERIES & OTHER OBSERVATIONS BY PAUL BABCOCK



We need to start here with one very important and valuable piece of information… Paul Babcock is now dedicated to open-sourcing his life’s work in the electrical sciences. He wants to empower the masses with some very profound information that took millions of dollars to learn.

This presentation does indeed contain some weird things relating to overunity effects, but Paul actually shows you the specific waveforms his circuits created when demonstrating overnity. This has never been disclosed to the public before.

A lot of information relating to overunity principles have made it out to the public but in Paul’s opinion, it hasn’t really taken root yet in any substantial way. Many overunity effects are also like ghosts where they come and go so how can we pin it down?

Get your copy here: Aether Weirdness - It's about Time: Magic Batteries & Other Observations by Paul Babcock

There is definitely some kind of aether weather that influences the machines with its own rhythms where the overunity ebbs and flows – how do we reconcile all of this with conventional physics, which teaches us that these things can’t happen?

Our own perception limits our ability to comprehend these higher dimensional processes and on top of that, most of us are unable to solve problems in certain ways once we are used to solving problems in other ways.

It is important to understand that there are many commonalities throughout many machines that are overunity or in other words, they output more work than is required for us to input into them. Paul will spell these out in no uncertain terms – at least for the type of machines many of us have direct or second-hand experience with.

AIR GAPS – the air has important magnetic properties, which is the secret to many overunity machines and Paul will walk you through many details specifically related to this. Ed Gray, John Bedini and others used these principles that apply to the air and its interesting qualities. This specific information is worth its weight in gold even if this is the only thing you get from this presentation.

Get your copy here: Aether Weirdness - It's about Time: Magic Batteries & Other Observations by Paul Babcock

Paul will also cover some aspects to Dr. Harold Aspden’s work. This work overturns Einstein’s Relativity as commonly understood as does the work of other forward-thinking scientists. What is so important about Dr. Aspden’s work is that it is using nothing more than relatively simple algebra that describes, time, space and other concepts in simple ways that makes them make sense in a very practical way.

Space itself has “energetic” properties and this is a huge part of the picture that everyone should understand so their foundation has meaning when it comes to the “free energy” sciences.

Something else that is important besides air gaps and energetic properties of space is phase switching – going from electric to magnetic and back to electric. Again, it is necessary to restate the importance that these are commonalities that exist across many overunity machines.

Tesla was known for the ideas of separating the so-called electrons from the radiant energy component of electricity and Paul covers this as well. This presentation is simple enough that most people can understand the concepts even without a background in electrical engineering.

The aforementioned switching methods elicits anomolous TIME effects in batteries, hence the subtitle to this presentatin – IT’S ABOUT TIME – it has more than one meaning. Twenty years ago, John Bedini told me that the capacitors were receiving a TIME charge, but many people didn’t not understand how literal that was. Paul will be going into these concepts from his perspective, which carries a lot of weight. He’s done it with his own builds and he has seen others do it too.

Paul covers his experience with John Bedini’s “Glass Case Motor” and how batteries that were so dead they were corroding away – yet they ran the motor, produced mechanical work, lit LEDs and charged themselves up!

Ed Gray’s motor technology exploited some of these effects and again, Paul wil show you the waveforms that showed the overunity in his own circuits. his inverters showed 106% and his other circuits showed higher such as in his lighting circuits.

And, you will learn how there can be overunity when measuring less than 100%. Much of this comes from Jim Murray’s teachings of how to correctly account for everything happening in a system and when you understand this, you may realize that you too may have overunity but were never able to realize it. This information is very important because most people do not properly account for all the input, output and losses. It’s all about distinctions and this will be spelled out for you.

If you’re serious about overunity and achieving it, this is a must-have presentation that is sure to open your eyes.

Get your copy here: Aether Weirdness - It's about Time: Magic Batteries & Other Observations by Paul Babcock

[Aaron]

Panel Discussion #1 – 2019 Energy Science & Technology Conference

Panel Discussion #1 – 2019 Energy Science & Technology Conference

Here is the free viewing of the first Panel Discussion with Paul Babcock, Aaron Murakami, James DeMeo PhD, Robert Haralick PhD, Jack Hanlon PhD, & Eric Dollard.

There is a wide range of topics in this discussion with an emphasis on a living ether. Both Dr. DeMeo and Eric Dollard give some interesting insights into the Orgone energy and wait until you hear what Eric’s personal experience was with a small orgone accumulator. It needs to be replicated far and wide!

[VIDEO]http://www.youtube.com/watch?v=d-aZdtQw5b8[/VIDEO]

[Aaron]

Panel Discussion #2 - 2019 Energy Science & Technology Conference

Panel Discussion #2 - 2019 Energy Science & Technology Conference

Here is the free viewing of the second Panel Discussion with Walt Jenkins, Aaron Murakami, Mike Clarke, Adam Griffin, Stefan Duminy, & Kurt Kung PhD.

[VIDEO]http://www.youtube.com/watch?v=Z07bkhI0ZN8[/VIDEO]

[Aaron]

2019 ESTC Vendors & Announcements

SUPPORT THE VENDORS FROM THE 2019 ENERGY SCIENCE & TECHNOLOGY CONFERENCE

[VIDEO]http://www.youtube.com/watch?v=HGEwLHw7Vwk[/VIDEO]

[Aaron]

Full Disclosure coming

RS Stafford is planning a full disclosure on John Bedini's Ferris Wheel Motor.

Details here: Full Disclosure Coming - John Bedini's Ferris Wheel Motor - A & P Electronic Media

[Aaron]

* NEW RELEASE * The Electrical Properties of Interfacial Water by Kurt Kung, Ph.D.

* NEW RELEASE * The Electrical Properties of Interfacial Water and the Possible Tools to Measure the Subtle Water Characteristics in Vitro by Kurt Kung, Ph.D.



At the 2018 Energy Science & Technology Conference, Dr. Gerald Pollack who is a professor at the University of Washington presented on the 4th Phase of Water. This is considered to be some of the most authoritative and advanced science in the world of subtle energy research dealing with water.

Dr. Kurt Kung attended the University of Washington and worked closely with Dr. Pollack who was his adviser at the time and currently, they are partners in ongoing water research and technologies. So if you are looking for more authoritative information on methods to measure subtle energy changes in water, this is the presentation for you.
[VIDEO]http://www.youtube.com/watch?v=Z99Q2DInywI[/VIDEO]

ENERGY HARVESTING FROM WATER

Dr. Kung starts with an overview of some of his work with EZ water, which is the 4th Phase of Water known as "Exclusion Zone" water, which you would be familiar with if you studied Dr. Pollack's work. This is what Dr. Kung is referring to when he is discussing the properties of Interfacial Water and its net negative charge.

The charge separation that happens when this EZ water is produced is very important because there are two very different types of water that are in close proximity to each other and they do not mix. Therefore, there is a high and low potential or dipole that is formed directly in the water.

What that means is that you can literally create a battery using one source of water that is simply in contact with a hydrophilic surface, which in turn creates the EZ water separation - if you have two potential differences in that water, then you have a battery. That in fact is what Dr. Kung did - by stringing a bunch of those water cells in series, he was able to light an LED to prove the point. It is a ways off before this is something that can produce large amounts of power, but it is in its infancy and is a profound discovery.

The Electrical Properties of Interfacial Water and the Possible Tools to Measure the Subtle Water Characteristics in Vitro

[Aaron]

Free recording available - eric dollard's live call from august 12, 2019

FREE RECORDING AVAILABLE - ERIC DOLLARD'S LIVE CALL FROM AUGUST 12, 2019 - Q & A COLORADO SPRINGS TESLA TRANSFORMER PRESENTATION

When I was down in West Central Nevada at EPD Laboratories, Inc. we recorded this live call where a few people asked some questions related to the presentation. Go here to listen to it now: 2019-08-12 Live Call Eric Dollard on 20:1 Scale Model Replica of Tesla's Colorado Springs Transformer - Eric P. Dollard - Official Homepage

Eric Dollard hit a grand slam with his presentation and demonstration of the 20:1 scale model replica of Tesla's Colorado Springs Transformer, which is available here: Theory, Calculation & Operation of the Colorado Springs Tesla Transformer by Eric Dollard

[Aaron]

John bedini’s self-recharging motor by peter lindemann, dsc



Last year, Peter Lindemann demonstrated a self-recharging system invented by Carlos Benitez, which is the apparent origin of self-recharging battery systems.

This year, Peter demonstrated a method John Bedini used to keep a battery bank charged up while running his monopole motors. The method had been mentioned in the past in online forums, but nobody seemed interested enough to actually explore the reality to it.

Go here to learn more: John Bedini's Self-Recharging Monopole Motor by Peter Lindemann, D.Sc.

I personally witnessed this method nearly 20 years ago at one of John’s shops affectionately nicknamed the “Palace” because of its interesting interior layout. Below is a picture of the EXACT machine that John Bedini accomplished this with. I also include a 12 minute video where I show you the machine in a video and give a basic explanation of the self-recharging process.



It was done most often with a plexiglass rotor where the coils were on both sides of the face of the rotor rather than at the circumference. It charged a large cap bank, which was then discharged to output bank. A battery was then shuttled back and forth between the front and back indefinitely without ever having to place them on a regular charger to charge them up since the machine and its setup accomplished this.

This demonstration unit that Peter showed kept its battery bank charged up all throughout the conference one one single charge. During the presentation, the monopole is running and he describes how the battery bank is arranged.

Go here to learn more: John Bedini's Self-Recharging Monopole Motor by Peter Lindemann, D.Sc.

[Aaron]

Trials & Triumphs of the Reactive Power Motor Generator by Mike Clarke



This presentation covers the second self-recharging motor demonstrated at the conference and it is also based on some motor concepts developed by John Bedini along with some other concepts that came from others.

Get your copy here: Trials & Triumphs of the Reactive Power Motor Generator by Mike Clarke, D.C.

Mike starts off by covering the relationship with his partner Norman, where they came from and what led to the development of this Reactive Power Motor Generator.

He shows some of the pieces/components to the motor that were used in the context of how it evolved and how it started as just a motor when he first took it to Paul Babcock's shop as well as the switching circuit that they needed to design to take it to the next level.



You'll also hear how it ran for hours and at the end of the run, the input batteries were a few volts higher than when it started! So not only are the back batteries being charged, the front ones are too.

It's also important to go up in voltage - this adds some complications for capturing the inductive spikes because the parts may not be rated for it, but there are many reason to go up in voltage. This even applies to the Bedini SG. Most people stick to 12v, but that is for learning. If you go up in voltage, then any voltage drops on the circuit wind up being a lower percentage of the total voltage compared to 12v. These concepts need to be considered and Mike and Norm incorporated these concepts into this machine.

[VIDEO]http://www.youtube.com/watch?v=CtHLRb93tlw[/VIDEO]

Mike explains some of the challenges and methods they went through to deal with the higher voltages so they wouldn't blow up so many parts.

It's also important to understand a crucial aspect to the batteries that must be in place for both the front and back batteries to rise and its simpler than you might think.

Get your copy here: Trials & Triumphs of the Reactive Power Motor Generator by Mike Clarke, D.C.

The importance of the air core is very important. Paul Babcock covered that in detail in his presentation and Mike will reiterate just how important this is. This machine will no perform like this if it has iron in its core!

When applying these principles, Mike winds up with a motor that runs COLD. The components don't heat up. After it gets running, everything cools down on the switching circuit. And, that is with it outputting about 140-150VAC. Keep in mind that Mike's goal is to power his entire home off of this machine.

He runs the motor so you can see it in action and while it speeds up, he explains more of the nature of the machine and it ends with some Q & A where Mike shares more details and insights into this project.

It is important to understand this is not a "How To" and does not include the schematics. It is a story of Mike and Norm's journey but he does share a lot of the concept incorporated into the machine that you can apply in your own experiments. To give you an idea of where to start, it is very similar to an air core Bedini SG running at a higher than normal voltage. Anyone that follows that path will learn a lot that they never experienced with iron core coils.

Mike does say after some of the IP is protected that he will share the how to so others can experiment with it.

Get your copy here: Trials & Triumphs of the Reactive Power Motor Generator by Mike Clarke, D.C.