Continued Tests of the 3 Battery System

[gotoluc]

10/31/17 (2nd day) 6th bat switch

Link to video: https://youtu.be/cJFam-RKb78

No more pictures between bat switches as they are now at every hour.

[gotoluc]

10/31/17 (2nd day) 7th bat switch

Link to video: https://youtu.be/c9IbKLCE3RU

[gotoluc]

10/31/17 (2nd day) this is just a battery check, no switch needed.

Link to video: https://youtu.be/tw_RY1hw4XQ

[gotoluc]

10/31/17 (2nd day) 8th bat switch

Link to video: https://youtu.be/jTErhGWTNro

[gotoluc]

10/31/17 (2nd day) last update of the day and shutdown till tomorrow morning

Link to video: https://youtu.be/QaXcqk9Ihxk

[Duncan]

https://www.youtube.com/watch?v=QKggql3aYkc

[gotoluc]

Test resumed 11/1/17 (3rd day) 9th bat switch

Link to video: https://youtu.be/91K_SIEig1k

[Duncan]

resistance lowers as the battery charges.
Whilst at resonance there is virtually no energy transfer (only amps) no energy = NO HEAT (I believe that's why I saw icing) This guy is prepared to walk that fine line with LA batteries across the grid. I've done this but its a bit nerve racking and not for the faint hearted
Capacitive Battery Charger - John Saves Energy
If you read his observation on using this contraption as a 'de-sulphater' and then read the de-sulphater as 'instant charging' well now perhaps you see the comparison I'm trying to draw.
Whilst I could think of no way to stabilize the operation or hold that series resonance with a high resistance the bits of the jig saw fit. - That's my guess and contribution for what it might be worth. you I know have a good grasp of things resonant Luc so I hope you see what I'm driving at and add something to this frustrating chestnut.
I also have the cheek to post your own video Luc for the benefit of others reading , in which you importantly note - square wave (impulse wave) can indeed be made resonant https://www.youtube.com/watch?v=lJQvqTpBdiQ

Kind regards Duncan

[ewizard]

That capacitive charger is basically the same thing as George Wiseman's Capacitive Transformer charger (no transformer is used). Same exact setup with a cap in series with the AC and put a FWBR on the end of it. It's one to be very careful with since you are using AC straight from an outlet.

[gotoluc]

11/1/17 (3rd day) 10th bat switch

Link to video: https://youtu.be/p6RemYy13sA

[Duncan]

indeed ewiz - no disputing that ! its simply the principle I stress , it works at lower voltages and higher frequencies I'm glad to say. Incidently I met George at one of the conferences and he uses this what shall we call it 'freak' to charge a big bank of batteries through off peak times at resonance (ish) and feeds the resulting energy back onto the grid atpeak time. The upshot of this is the utillity company have to pay him every quarter for using their energy - must piss them a bit I'm sure! If'n you want to read that story its pay to view here
Reverse Your Electric Meter, Legally! | www.eagle-research.com
however you have all the pieces anyway now
kind regards Duncan

[Duncan]

https://www.youtube.com/watch?v=TwMCs1gO2o8

however I surmised this was the longitudinal impulse wave I was looking at , The difference is striking as you'll find if you try it , there isn't one resonant point there are many. I view it something like striking a piano key , not only the fundamental sounds but all sympathetic frequencies ad - infinitum , that battery rocks ! , to make it stable and last ahhhh thats a different matter.

[gotoluc]

No disrespect to anyone but I would prefer any discussion that are not related to the present device under test to be discuss in another topic, since if the components I'm presently testing do prove to extend the motors run time which Dave says he's never seen yet, then that will be and accomplishment and the results can only improve from there if using larger batteries and or Pulse motors further improve the results.
With this in mind, it would be great to have a topic that focused only on the present test device so newcomers can quickly and easily go through it and see the results without getting confused about other possibilities.

The next 3 bat system test I'll do will use the same circuit and batteries but the DC PM motor will be Pulsed.
Then we'll be able to confirm without a doubt which direction is best.

Thanks for your understanding

Regards

Luc

[gotoluc]

11/1/17 (3rd day) 11th bat switch

Link to video: https://youtu.be/gWu9ovdAIAw

[gotoluc]

11/1/17 (3rd day) 12th bat switch

Link to video: https://youtu.be/FjkFvRnVgbo