ENLIGHTENED MAGNETISM (The Full Proof of Ken Wheeler's Theories)

[Ben2503]

dutch disease

Aaron this post is so right on I will have to applaud you
There is perfect harmony in every line, both of the post below
deal with a suggestion that free thought outside the Gov run box=
mentally ill.

This is a battle for position in the public eye, not a display of a genuine
thirst from learning. Just one trick sentence after another to keep
those listening in off balance, stopping them from timely progress.

Always planting seeds of doubt. This is the same distraction all over again.

Keep up the charge, hold up that sword. Below are my favorite quotes
from you that made my day.

Unlike you, the Dutch are taught to be independent thinkers.
Remember the "Dutch disease"?

It was also a Dutch scientist that opposed to Einsteins views from the very start.

[BroMikey]

Unlike you, the Dutch are taught to be independent thinkers.
Remember the "Dutch disease"?

It was also a Dutch scientist that opposed to Einsteins views from the very start.

Hi Ben ready for round 2?

No I don't know what you are saying here.

Did you see model 1 and model 2? What is your take on the two
models? Yes the dutch are very smart people I have some. And
the fightin Iris too. But Grandad's last name was GOLDIE

And I got the prize fighter nose to prove it.

Grandma spoke German to me, she and granny were German dutch.

So what did you say your name was?

Does HASLOCK ring any bells? Well I goofed the spelling.

My choice is to think free yes. No Norris gOds 4 me.

Anyway, what's your take on the two models? Or don't
you understand the question either? You guys are stubborn
you know that? That is the opposite of smart.

The wind mills from the 1600's always caught my eye up there.

You better stick to the models for now cause we got your work
cut out for you. Better look at it and realize the old model is flawed
which is a foundational block and that will soon bring down the house.

You guys should know better than to mess with the best after
year of complacency. Your work/fun is just beginning

The current model center on burning energy but it's time to recycle.

Model 1 is game over.

[Ben2503]

Dutch disease.

Hi Ben ready for round 2?

You consider this a fight? Man you're sick. Modern Germans and Irish don't think in this way anymore as they experienced the terrors of war and came to the conclusions that it brings nothing but destruction and losers. I think the US is still one of the countries that still glorifies war. In my view, in this respect a severely underdeveloped country, similar to some African countries.
Your educational system, in my view, produces narrow minded individuals that need some kind of Guru, which they place on a pedestal. When this guru falls of it's pedestal, they find a new one.

The Dutch (from the Netherlands, not the Germans) are notorious in Europe for having an opinion on all almost everything and do not hesitate to express this opinion in a very direct manner, preferably in the open, and tend to embarrass their leader whenever they can

To clarify the Dutch disease:
Back in the 1970ties. The majority of the US people, represented by their Government, came to the conclusion that the 'Cold War' had to lead to a nuclear World War 3. So they devised a very cunning plan that would turn Western Europe into the nuclear battlefield and that would make the US some nice profits in the proces.
The only thing the NATO partners had to do, was to buy nuclear cruise missiles and install them in their countries. Then the Russians would have to attack Western Europe first, before the first missiles would reach the US. The US would of course supply and operate these cruise missiles in countries that didn't have nuclear arms.
The Dutch 'Peace Movement' understood this and successfully opposed against these plans. After that Belgium, the UK, (the Germans were one of the last!!) etc followed. It was the beginning of the end of this cold war.
The Americans (as we call them) referred to this opposition against their nuclear strategy, "The Dutch disease".

The other guy was Hendrik Lorentz (yes that one) he was the one that gave Einstein the idea that C was the maximum speed in the universe. But like Tesla he also dismissed Einstein's space - time theories as pure nonsense.

In MHO any theory that addresses time, which is invented by men, as a dimension and not as a Scalar, is a waste of time and I am not going to spend a minute on it as these are exactly as Telsa indicated: Mathe-magical theories that have no foundations in the real world. Tesla also said something that had to do with "thinking deeply" and "Thinking clearly". I call it 'common sense'.

What I understood from Dollard's theory (with my limited capacities, I know) is that he introduced a mathematical transformation, similar to the J-operator which we use to calculate electrical AC circuits. Instead of calling it the "imaginary space", he calls it Counter space. Fine with me.

Like there is no 'imaginary' current, (we have voltage and current and an angle between them) there is probably also no "counter-space"
I don't see the practical use of Dollard's theories, nor have I seen the math being used to simplify difficult problems.

Finally:
In one of the letters from Tesla (published by Ernst in his thread), Tesla admitted that there were 4 critical errors in his Wardencliff design (which caused further delays in the construction)!! This shows me once again, that we are all just humans and hence we all make mistakes and are all looking for the right path through the maze.
In my view me can learn from our own and each others mistakes.

Best of luck
Ben

[Ben2503]

E=½mv2

mgh (mass x gravity x height) is used to determine the potential energy in an object of a certain weight at a certain height. In the popular conventional model, the context that is used it to show how much potential energy is claimed to be stored in the object as it was lifted to that height.

I agree with you that this is completely wrong. The definition of mechanical energy = ½M*V^2.

As there is no V in M*g*h, there is no energy in the object. therefore it's called "Potential" energy.
In a way gravity (what ever it is or caused by) works as a spring in a mass-spring system. when you lift the mass, you don't add any energy to the mass other than ½ *M*V^2 during the lifting.

Same applies for a charged capacitor. It has potential electrical energy, but the total energy is 0. During the discharge of the capacitor, the current flows and energy is being made. In that respect I agree with Dollard. Energy is the rate at which electricity is destroyed.

Until we reached a point where we can 100% explain all phenomena in nature using one unified theory of everything, I personally feel it's 'not done' to dismiss all other theories as 'totally wrong'.
I would propose that we look at new theories in a way that we compare it with what we know, see how many ' Errors' of the old theories are eradicated by the new theory and the adopt or reject the new theory.

In the past 2 years I read whatever I could find on Tesla's inventions and what surprised me is that many of his efficiency improving ideas were never widely spread or used. One striking example is where he proposed to add a capacitor to AC machines in order to either reduce the Lorentz effects or improve the efficiency.
At the time he patented his ideas, nobody was interested in reducing energy consumption and therefore it's not very surprising that nobody bothered. However presently this would be more than interesting.
A simple L-C resonant circuit can be used to reduce the unnecessary destruction of electricity. In my view a DC motor is totally NOT Tesla.

Best regards,
Ben

Best regards,
Ben

[BroMikey]

You consider this a fight? Man you're sick. Modern Germans and Irish don't think in this way anymore as they experienced the terrors of war and came to the conclusions that it brings nothing but destruction and losers.

Agreed

I was just joking cause I know how you people are up there Now Now
Ben stay cool.


I think the US is still one of the countries that still glorifies war.


Yes this is true the media can get these Americans to do anything
THEY want done, WE are a WAR-Mongering nation. My Grandad by
mariage the only one I know left over from the war came from Finland,
he taught me a lot about stuff. He was smart with electronics.

So as a German Jew taught by a Fin I learned to much.








.
Your educational system, in my view, produces narrow minded individuals that need some kind of Guru, which they place on a pedestal. When this guru falls of it's pedestal, they find a new one.

Ben

Well you hit the nail on the head with the "ding bats" running around in our schools. They act like transcendental closet
clones if you ask me.
I guess I'll have to change my mind about you Ben. There might be some
hope after all to find someone who actually can see things for the way they
are.

I gotta run and I'll be back to clear up the rest of your math or one of the
guys who are smarter than me can do it.

[Ufopolitics]

Electromagnets Center Plane Dividing Poles...

Hello to All,

Here is a short Test Video in order to Enlighten what really looks like... the Structure of every single Electrified Coil out there...as well as of every single Magnet.

[VIDEO]https://www.youtube.com/watch?v=kpAb8vfah0c[/VIDEO]

ELECTROMAGNETS DIVIDING POLES CENTER PLANE

We must realize that no matter which model we are discussing...As a common and undeniable property of every Magnetically Polarized Ether Fields (Poles) whether obtained by Momentary Electrification (Electromagnet) or by its product, the Permanent Magnet...Both Opposite Fields contained within the Embodiment will always be aligned through a straight center imaginary axis...and it is this axis extending it to space, the actual transparent "needle" which ALWAYS will point directly to the center vortex, high pressure end region of the attracting Vortex in another Magnetic Field.

Now...What would be the best, more accurate Sensor to seek/locate, reveal exact spatial volume coordinates as polarization type of a Magnetic Field?
Obviously it would be a Free Spinning Magnet, containing both fields the best sensor to either attract or repulse whenever facing any singular field...It literally "paints" the Field configuration in the Air/Space.

And...I am really sorry for those who preferred the ancient, obsolete...Model 1 from 1831...based on Iron Filings Methods...My must sincere condolences...:

[IMG][/IMG]

THE RIGHT PATH:

[IMG][/IMG]

Of course there IS "something" right in the middle/center of every single Magnet or Electromagnet...A Plane...a Dividing Plane between Both Ether Bubbles projecting towards Space their Polarized and Opposite Fields!

[IMG][/IMG]

The Video above is about an Electrified Air Core Coil...in order to be able to penetrate inside the Magnetic Field(s) Core with the Sensor shown...I only "scanned" the Interior Core of the North Field on this Video, using a Double South (alike dual poles) "Monopole" Spatially projecting Outwards...However, it could be done the opposite way, scanning the South pole with a Dual Spatial North. A Dual Polarization of like fields will align perfectly from the start to the end of the scanned opposed field...after it passes the field volume, it will flip around a 90º Angle by the Repulsive Influence of the like Pole.


Regards


Ufopolitics

[Ernst]

Just a quick question about your latest video (great graphics BTW):
What would you have expected your sensor to do if the ancient model 1 were correct?


Ernst.

[Ufopolitics]

Just a quick question about your latest video (great graphics BTW):
What would you have expected your sensor to do if the ancient model 1 were correct?


Ernst.

Thanks Ernst...I am trying to master "the Science of Arts..."...

That is a great question...however, that is the first Analysis I did in CAD and Animation 3D...following the Wrong Model 1 straight Field Lines Path as "revealed" by iron filings.

[IMG][/IMG]

It should have behaved just like above image...Following a straight line BASICALLY when passing A "Non Existing Center Reversal"...so sensor traveling through the shown Travel Path MUST have displaced like shown above, but it did not...

Instead it behaves like shown on below image...following an aiming inclination towards both end poles

[IMG][/IMG]

Compare both "Travel Paths" intervals for both Images, that is where the difference is.

And finally, the previous image shown again below...where I took sensor as close as possible to coil or magnet center plane to embodiment, and that is when it is noticed the more accurate movement from sensor, describing the round shape of each fields, as always pointing towards extreme end center vortex.(below image)

[IMG][/IMG]


Regards


Ufopolitics

[bistander]

Coil field

Hi Ufo,

Can you repeat with a bar magnet? And with a iron core in the coil?

Ernst,

Conventional theory shows flux pattern like this for an air core coil.



And here is iron filings flux pattern with a bar magnet and little compasses placed in the field.



Nice experiment Ufo,

bi

[Ufopolitics]

Helping to clear some possible doubts...

Hello to All,

It took me quite some time to reach a final conclusion on this whole analysis, and ending building my own magnetic sensor with small BUT strong magnets...

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

You will find many, many convincing pictures like the above, based on Iron Filings, showing the fields interlacing as we have known previously in ancient Model 1...However, let's realize that Iron Filings are very LOW FERROMAGNETIC MASS PARTICLES, therefore, when they get influenced by a VERY STRONG MAGNETIC FIELD, they get MAGNETIZED INSTANTANEOUSLY BY INDUCTION, which means they get automatically aligned with the stronger magnetic field poles alignment...

So, all we are seeing above is just "A FERROMAGNETIC POLARIZED EXTENSION" from that Magnet, JUST LIKE sticking the magnet to a piece of iron, we get an extension of either pole where iron is attached.

The same exact "Optical Illusion" takes place when very tiny and thin needles from Compasses are moved around a very STRONG MAGNETIC FIELD. Even though needles are magnetized to seek Earth North Pole, the magnetic strength grade is VERY LOW compared to the Magnet being tested. PLUS, the fact that the Compass Arrow displays the false idea that dictates "direction" and not polarization. (see image below)

[IMG][/IMG]

So, I decided to make a Sensor which Magnetic Field could not be overridden or highly influenced by the magnetic field under observation...like in the video shown previously, those are tiny Rare Earth Magnets, BUT pretty strong. So, the stronger the magnet in your sensor is...the more precise results would be obtained.

Regards


Ufopolitics

[Ernst]

Ok UFO,
What I have done is....
- searched for an iron filings image here
- took your "wrong path" image and scaled it to this image
- took your "right path" image and scaled it in the same way
- I flipped the "right path" image vertically so that it appears in the lower half of the image
- I over-layed the iron filings image with your graphics (sorry for the distortion)

That image you can find in the attachments to this post.
What you can see now is that the iron filings do not support your "wrong path" image, but instead match perfectly with the "right path" image.

So in short, I agree with your graphics, but they do not differentiate between the model 1 and your theory.
So model 1 is still upheld. No condolences needed .


Ernst.

[Ufopolitics]

Hi Ufo,

Can you repeat with a bar magnet? And with a iron core in the coil?

Nice experiment Ufo,

bi

Sure, Bistander

I have done it already with almost ANY kind of possibilities...and with strong magnets, the sensor movements are much more radical than on video...actually my PSU as you could notice is not that strong...that coil had 1.0 Ohm and you noticed it dropped to 2.0V...And the coil wire barely got ambient temp.

I have other experiments which are gonna blow your mind...and exactly by inserting an iron rod inside same coil...





Ufopolitics

[Ufopolitics]

Ok UFO,
What I have done is....
- searched for an iron filings image here
- took your "wrong path" image and scaled it to this image
- took your "right path" image and scaled it in the same way
- I flipped the "right path" image vertically so that it appears in the lower half of the image
- I over-layed the iron filings image with your graphics (sorry for the distortion)

That image you can find in the attachments to this post.
What you can see now is that the iron filings do not support your "wrong path" image, but instead match perfectly with the "right path" image.

So in short, I agree with your graphics, but they do not differentiate between the model 1 and your theory.
So model 1 is still upheld. No condolences needed .


Ernst.

Ernst,

Take a look at image below:

[IMG][/IMG]

The Point to observe here is NOT about a perfect and identical Elliptical Path that always must match,this curves vary with the length of the bar magnet...they become more elongated the longer magnet is...STILL NOT THE MAIN POINT TO OBSERVE

The Main Point to Observe here is that MODEL 1 does not have a CENTER CONVEX SHAPE, A DEFLECTION INWARDS TOWARDS CENTER EQUATOR, BUT A CONCAVE SHAPE, traveling FURTHER FROM CENTER.

In reality, the Real Magnetic Field HAVE A VERY SKINNY WAIST, Just like a Miss Universe measurements...90-60-90...While the Model 1 is a FAT, OVERWEIGHT BELLY FROM AN OBESE EATING DISORDER PERSON...


Understand now?


Ufopolitics

[Ernst]

Hi Bi,

You show me the flux pattern of an air core coil. But, ehr... why?

@Ben,
I was part of that "Dutch disease"...
But I came out very disillusioned. In response to our protests the Dutch government gave Russia an ultimatum... As if a superpower would respond to a tiny country such as ours!!!
But Russia DID They actually accepted our proposal!
So what happened next? Our PM gave this speech:
"I have hoped and prayed that it would not be necessary, but Russia responded too late..."
Which was not true, they accepted and they accepted in time.
But what else could our PM do? The missiles were already installed a few months before the official decision was made.... and even before our protests....

My faith in our government has never recovered....


Ernst.

[Ufopolitics]

MORE DEFINED REALITY OF THE TRUE MAGNETIC FIELD SHAPE OF BOTH POLES WITH BISECTORS* AIMING EXACTLY AT JUST ONE (1) POINT, THE CENTER HIGHER PRESSURE FIELD VORTEX

*BISECTOR AXIS RUNS 90º TO MAGNET EQUATOR PLANE

[IMG][/IMG]

THE VERY CENTER POSITIONING SENSOR IS DUE TO BEING PULLED BY THE SAME VECTORS OF PULL FORCE PRESENTING ZERO ANGLE (CAN NOT PLEASE AIMING BOTH CENTERS AT THE SAME TIME)

Ernst, If You would like to start analyzing this in a very critical and specific way...am busy already done it...

Check Each Sensor Positioning BISECTOR related to exactly the attracting point to both fields.

Then Compare to Model 1

And WE have not discussed the INNER CORE RESULTS YET....


Ufopolitcs