Got the machine back.
Edit:
in the down time I have been testing the coil output with rotors on BOTH ends of the coil. The output is DIFFERENT, as are the operating electronics. If I ever build another setup, it will be….
Plate with adjustable opposition magnets - rotor - six coils - rotor six coils - rotor - plate with opposition magnets. It can be run as just a generator or as a motor and generator at the same time. If run as motor and generator at the same time, you don’t need the opposition magnets, so that’s probably the best use of resources.
-
No flywheel just a modified generator that is zero cog lenz free that took a person their entire life to design. This is how it's done with all of the so called magic units with flywheels. They all modify the generator just like Thane Heins has done only in a different way. No laws of physics broken just follow the music, if you try you will succeed.
Leave a comment:
-
I find very interesting how shallow all of the so called scientific investigators seem to be. Below shows indelible proof that only a fraction on the people won't be fooled.
Originally posted by BroMikey View PostAbout the REGENX
Let me point out why Thane is not being excepted as legit. Take a look at this statement from the Ottawa science community..........
" Complicating the analysis of Heins’ apparatus is the fact that he is not running his motor at full voltage and normal speed. Instead, he supplies it from a variac (a device for varying AC voltage), at a voltage well below the 120V that the motor is designed for. As a consequence, it runs at only a few hundred revolutions per minute, instead of the approximately 3500rpm"
And most people see this and think Thane is a huckster. Induction motor run full speed at 50vac all the way to 120vac. See how easy it is to trick you? Thane's discovery will make all of the other story book experiments look like toys. This is why Thane is rejected.
Rejecting an honest demo of Thane's work shows intent. Instead he is portrayed as a fraud. Here is the website of clown engineers who have no clue.
http://www.ottawaskeptics.org/2008/0...hermodynamics/
here is one more foolhardy slander
" Running it at such a low speed causes it to overheat,"
False, induction motors do not run below their rated rpm until they are severely overloaded. Thane is running his grinder motor at 150watts on up to 280watts for a 1/2hp. Clearly the people who are afraid of Thane don't do any bench work. Most go with this line of reasoning going along just to get along. The blind following the blind is so much like the masses it's laughable.
My 1/2hp washing machine motors top out at 9amps and that is the run load draw right on the nameplate or sticker.
A new day is dawning and the worry warts are going to be dumbstruck.
Here is Ottawa's final assessment of poor ole despised Thane based on their infinite reasoning powers that most of you agree with.
"Conclusion
Heins appears earnest and basically honest, but persistently self-deluded."
Leave a comment:
-
Last edited by BroMikey; 06-05-2022, 07:38 AM.Leave a comment:
-
See the angling of electromagnets vs the permanent magnets. Interesting parallel. Compare this with Daniels second version, see the outside magnet angles
Originally posted by BroMikey View PostLeave a comment:
-
Last edited by BroMikey; 06-04-2022, 06:19 PM.Leave a comment:
-
Awesome Dave I am looking foreword to many great experiments ahead. I am glad you got to see an old class mate as well as all of your kin.Originally posted by Turion View Post
Your new machine will be much better I am sure, especially since you are using excellent core material. Here is a 2400 rpm monopole, people are catching on fast.
Adams inspired https://patents.google.com/patent/GB2282708A/en
Last edited by BroMikey; 06-04-2022, 04:47 AM.Leave a comment:
-
No, just a new rotor with 1" x 1" magnets that each put out as much power as the original 2" x 1/4" magnets did. (Not 25% of what the original magnets did like the 3/4" x 3/4" I just replaced) Only instead of six magnets, like I had on on the original rotor, I will have 20.
Got to see my kids and grandkids. Got to see my best friend from college. Loads of fun. But glad to be home.Last edited by Turion; 06-04-2022, 04:43 AM.Leave a comment:
-
What did you order done? A whole box and a new rotor? You must be rich. If I had all the money you put into boxes, motors and parts I could move to Hollywood.Originally posted by Turion View Post Good to hear from you Dave
PS what happed? Did you have fun seeing the chillun's?Last edited by BroMikey; 06-04-2022, 02:34 AM.Leave a comment:
-
Back from my trip. My stuff should have been ready last week, but half the shop at my machinist's place came down with Covid, so it will not be ready until Tuesday of next week. Then I will have to assemble it all. But finally on the downhill. It's a 2.5 hour round trip, but because of the delay they are delivering it to my door. Can't beat that.Leave a comment:
-
By all means try try try and do bench work is good. Book smarts go only so far then you have to sweat. Don't let the math make you quit ,Keep at it and best of luck. It has always been my assumption that success will come when you modify the generator and motor. Stop the generator cogging and recirculate motor power or collect back 85% and then you will win.
Those beautiful motor generator flywheel projects are all over the web that never get close after spending many thousands on all the best motors and generators. There is more to it than luck. Thousands of tubers fail this project.
Put in 120w and get back 100w on the motor modification circuit see Lindemann video this is the number one starting place. Later improve the generator to zero drag / cogging.
have fun most of all and you will learn the hard way ( best of all learn) like everybody does
Last edited by BroMikey; 05-30-2022, 06:39 AM.Leave a comment:
Leave a comment: