Barbosa and Leal Devices - Info and Replication Details

[tonyben25]

Thanks sir for the response, please how do i know the magnetic state of my location(Nigeria)?

[clarence]

PAGE 40 - posts # 1182 & # 1190

Hello all, I must start by saying a very big thank you to Clarence for your kind heart to humanity in sharing success.
I had given up hope on free energy pursuit after several years of replication of different devices without anything to show for it.
i came back this week and finally it seems there is some thing hope for.
Pls can some one point me in the direction to start up this project. I have gone to the beginning of the thread and it seems there are some photos and materials shared by Level which i cant see anywhere in the thread. Please i want to start this replication. Thanks.

Hello tonyben25,

the above title tells you where to go and look.

If the location you are in does not show a magnetic anomaly in the red or pink zone of at least 140 ntesla value don't waste your time or money as you will be disappointed.

best regards,

Clarence

[tonyben25]

Hello all, I must start by saying a very big thank you to Clarence for your kind heart to humanity in sharing success.
I had given up hope on free energy pursuit after several years of replication of different devices without anything to show for it.
i came back this week and finally it seems there is some thing hope for.
Pls can some one point me in the direction to start up this project. I have gone to the beginning of the thread and it seems there are some photos and materials shared by Level which i cant see anywhere in the thread. Please i want to start this replication. Thanks.

[clarence]

Hello There Mr Clarence

40" of rain? Yikes!! I hope you have a boat down there if it is low county.
I remember seeing the Mississippi in 93 driving over, it was nuts.

Your experiment is really nice. Good work and good to know how these
various coils work together. Awesome!!! The 4 mini's, the small switches
the whole sha-bang is really shaping up.

So am I correct to assume that this charging circuit lets you run power
and charge the batteries so the system will maintain itself? I know it
is and your battery needs to be better. Let us all know what happens
with another new battery.

Batteries only go so many cycles and you have to chuck'em. Especially
when experimenting pulls them down to 11-12volts unless they are
deep cycle converted to ALUM

But hey, you have your hands full right now which makes it understandable
The hard part is not buying another battery The hard part is doing the
hard research day in and out. Gotta give ya a slap.

That sure is a pretty set of coils, I love your M.O. heavy duty power.
The rectifiers are dynamite. Keep me up to date on this beaut. I have
always wanted to get some time out to do some coils like this. Now I'll
have somewhere to start.

You sure are a stickler for detail.

Hello BroMikey,

Always interested in your thoughts and comments.your member support for
the long in-between times thru R&D really helps also!
Bless you BRO!

after the battery conversion is when a true judgement can be given to all of this latest effort. that is why I said for all to regard it as just preliminary info
at best.

BEST regards again BRO,

Clarence

[BroMikey]

Hello There Mr Clarence

40" of rain? Yikes!! I hope you have a boat down there if it is low county.
I remember seeing the Mississippi in 93 driving over, it was nuts.

Your experiment is really nice. Good work and good to know how these
various coils work together. Awesome!!! The 4 mini's, the small switches
the whole sha-bang is really shaping up.

So am I correct to assume that this charging circuit lets you run power
and charge the batteries so the system will maintain itself? I know it
is and your battery needs to be better. Let us all know what happens
with another new battery.

Batteries only go so many cycles and you have to chuck'em. Especially
when experimenting pulls them down to 11-12volts unless they are
deep cycle converted to ALUM

But hey, you have your hands full right now which makes it understandable
The hard part is not buying another battery The hard part is doing the
hard research day in and out. Gotta give ya a slap.

That sure is a pretty set of coils, I love your M.O. heavy duty power.
The rectifiers are dynamite. Keep me up to date on this beaut. I have
always wanted to get some time out to do some coils like this. Now I'll
have somewhere to start.

You sure are a stickler for detail.

[jim glinski]

luc2010

I don't know about hf but I have striped down a small DC motor and shorted out the commutator windings removing remaining wires and iron core material and magnets to make a rotating switch . going to run it with a five dollar 555 timer circuit and another DC motor for variable speed control . I did this because bedini said you needed a laith to make a carbon brush rotation switch . so I tried this and it was OK. Jim

[luc2010]

Hello to All,


Can DC motor (12v) acts as spark gap providing pulsed DC?

i am trying to avoid electronics!! in order to create HF low voltage (12 v battery) to replicate the latset circuit!!!


Best Regards
luc2010

[jim glinski]

Thanks Jeff

[Jeff Pearson]

Earth Magnetic Anomaly Grid

I use the plugin for Google Earth. I am in a dark blue to black zone.

[jim glinski]

Any one have the link to the earth ground electrical maps ?

[jim glinski]

frequency dump

Hi Clarence
Have you tried a pi filter to remove any unwanted hi frequency?
I guess you've tried a square wave inverter and it didn't work ? Not just relying on the patent info?

[edwins]

Hello edwins,

Now I understand the WHY for your questions!!!!

Also if you need more info don't hesitate!

BEST regards,

Clarence

Thank you brother!

Edwins

[BroMikey]

Hello BroMikey,

I finally finished the IFT module and ran it and put it through it's
paces however the results were a mixed bag at best!
Nothing would stay stable for a long enough period to be able to
have anything usable to be able to work with.
the end output was low acv and barely enough amperage to be
able to see only a small glimmer on a mere 4 watt night lite bulb.
was really aggravating to have spent all the time and effort into
the attempt to get rid of the high frequency in order to be able
to use the 122 acv output from the large TBC coil.

Its the same age old problem that Tesla, DS, and countless others
have tried to deal with.
once a set high frequency is introduced into any system, that
frequency is there forever until the initial system is destroyed.
this will be one of my next
moves. to divide the HF into smaller voltage increments and then
rectify each divide to DC voltage suitable for powering 60 HZ
inverters at a usable amount in residential devices and appliances.

one additional method I have already started is using the magnetic
flux from the TBC coil to empower a charge method other than the
smart charger which uses up way to much amperage to be profitable
in my view.

Time will tell which method works the best!

Regards,

Clarence

Wow that sounds like a good deal of work accomplished. I am looking
forward to your results over time. This is a very advanced work so don't
be surprised if not many are able to follow in your foot steps.

I think that the first stage can be run showing the extra using lights
while your research continues on the refinements for powering all
120vac devices.

You will find a way to isolate.

[clarence]

[QUOTE=BroMikey;

Hello BroMikey,

I finally finished the IFT module and ran it and put it through it's paces however the results were a mixed bag at best!
Nothing would stay stable for a long enough period to be able to have anything usable to be able to work with.
the end output was low acv and barely enough amperage to be able to see only a small glimmer on a mere 4 watt night lite bulb.
was really aggravating to have spent all the time and effort into the attempt to get rid of the high frequency in order to be able to use the 122 acv output from the large TBC coil.

Its the same age old problem that Tesla, DS, and countless others have tried to deal with.
once a set high frequency is introduced into any system, that frequency is there forever until the initial system is destroyed. this will be one of my next
moves. to divide the HF into smaller voltage increments and then rectify each divide to DC voltage suitable for powering 60 HZ inverters at a usable amount for residential devices and appliances.

one additional method I have already started is using the magnetic flux from the TBC coil to empower a charge method other than the smart charger which uses up way to much amperage to be profitable in my view.

Time will tell which method works the best!

Regards,

Clarence

[clarence]

Understood now!

Hello edwins,

Now I understand the WHY for your questions!!!!

Also if you need more info don't hesitate!

BEST regards,

Clarence