William F. Skinner - 1939 Gravity Power

[MagnaMoRo]

You have to flip two of your arrows.
Front and back, left and right, take one of the green arrows and flip it toward yourself , when the front rotation is moving in toward the structure , the back should be moving out of the frame.
artv

Nope. I have a freeze frame below of the upper weight positioning verifying the approximate alignment at that moment. This view is from the front right corner of the machine.



The front weight and the right weight are pointing to the front-right corner.
The back weight and the left weight are pointing to the rear-left corner.

MagnaMoRo

[shylo]

The weights rotate into the structure, or frame, and back out.
When the front is moving in the back is moving out.
The left is 90 degrees of rotation away from moving in ,and the right is 90 degrees away from coming out.
It's the same idea as Matt Jones' Bouncer.
Still trying that video when I call up history and watch it the address bar says https://www youtube.com/watch?v=gk0zCpLlwm4&feature=youtu.be
artv

https://www.youtube.com/watch?v=gk0zCpLIwm4

maybe this will work?

[shylo]

Sorry I think I'm wrong about the degrees.

[MagnaMoRo]

This is how I see the top section shafts and weights moving in 4 basic steps.

12
34

The green arrows indicate direction of spin looking from the top down.
The Black arrows indicate the direction of the lean of the shafts.
The Black arrow tips indicate approximately where the top section weights are. Note: the weights will lag behind as resistance is encountered by the machine.

[VIDEO]https://www.youtube.com/watch?v=gk0zCpLIwm4[/VIDEO]

Thanks shylo!
MagnaMoRo

[shylo]

Is the crossbar stationary, It looks like it to me?
artv

[MagnaMoRo]

Is the crossbar stationary, It looks like it to me?
artv

Look at the window behind the machine.
Even though it seems like a very bright source of light (for the camera it is!), but now, look at the shadows on the floor.
The main source of light is off to the right but out of view of the camera!
So, now is it not possible that a shadow from the moving shaft is what is being seen? and still I don't see any cross-bar going from the left side to the right.

MagnaMoRo

[BroMikey]

I Like these pictures

[Aaron]

you should watch the references given

Are you kidding? I have posted countless times exactly how I see the crossbar functioning - and even showed it with hand-animated graph paper to boot.

Aaron:

In harmony with my last post, the picture below illustates what I mean by the direction of lean of the shafts and their direction of turn.



How would you propose the cross-bars function here, if they exist?

MagnaMoRo

[Aaron]

good luck

So, now is it not possible that a shadow from the moving shaft is what is being seen? and still I don't see any cross-bar going from the left side to the right.MagnaMoRo

Good luck to you and your projects!

You're obviously on the path of some other agenda.

[shylo]

https://www.youtube.com/watch?v=VATUE8M5pQM&feature=youtu.be

Just testing

[MagnaMoRo]

Good luck to you and your projects!

You're obviously on the path of some other agenda.

Well, the only agenda I've ever been on is to give a fair-&-square analysis of technology that can better the situation for mankind. I have received free, and I have given free.

I have respect for what I have seen you do. And appreciate what you have made available. I would hope that our "agendas" are the same. But please, stop making this about me. It's about giving input to the understanding of this machine for the benefit of all!

I believe any analysis of the facts available will determine the truth.

I believe my analysis is proving that Mr. Skinners device truly has a fantastic degree of symmetry and balance.

I hope that you will continue to provide your own opinions in light of any revelations offered by post on your forum.

Please do not consider the post as being in opposition, but truth seeking.

MagnaMoRo
YouTube: https://www.youtube.com/user/MagnaMoRo/videos

[MagnaMoRo]

https://www.youtube.com/watch?v=VATU...ature=youtu.be
Just testing

I believe it demonstrates the rotational synchronization that I have illustrated.

MagnaMoRo

[shylo]

To All, Look at MagnaMoRos' post #604
Look at the very top center of the animation, now look down to the left where the crossbar would be , you'll notice a white spot where the light shines through . If that crossbar is moving left and right , that white spot would blink in and out, but it dosen't , it never changes ...
That means the crossbar is not moving ,in any direction.
Saying the crossbar is oscillating is just a trick of the camera, That's not to say an elliptical motion wouldn't help, but that's not how Skinner is doing it.
Thats just the way I see it, If anyone sees' an oscillating crossbar please explain.
It is almost the same as the bottom drive I posted as a test.
There is a spinning plate on the end of the crossbar, but the crossbar doesn't move.
artv

[shylo]

https://www.youtube.com/watch?v=CBpmbioRxCY&feature=youtu.be

See if this works , This is where the gain takes place IMO.
Notice how the plate is always going down?
artv

[BroMikey]

Dudes, Check out Aaron

He is the star of this show boys.

Aaron has explained it so clear.

You simply can not ignore these entries.

Here you go, no excuse.

sorry guys Aaron is still our main man. He did his
homework


https://www.youtube.com/watch?v=JolNozy8UEY

http://www.energeticforum.com/renewa...-power-12.html