Books: WITHOUT SECRET AND WITHOUT FUEL

[Rakarskiy]

There are already so many in the world, the mysteries about devices, without the combustible energy of a closed mechanical type.
Books: Non-fuel energy generating deviceView screenshots of the book.
Go to the page in the store.

[Rakarskiy]

NEW! The very first generator Over Unity! Germany, 1945.
The method without fuel, the generation of electric energy, which really works according to all the laws of classical physics.
The main thing is that this is a very simple circuit and a combination of magnetic switching.
The greater the load, the higher the speed of rotation of the magnetic rotor. The system provides DC. Legs grow out of the simplest device from Germany during the Second World War!
The network is not very, like to talk on this topic. Small notes Bedini. It is very likely that acquaintance with this project determined the further goal of creating the devices of radio engineer John Bedini. According to the works of Robert Adams and Bill Muller, these people are far from amateur in the world of electricity.
But, as rumors, about two German all-electric submarines. captured by the Russians at the end of the second world war? You can search for evidence, or unravel the device, I prefer the second option.
Devices can achieve efficiency of more than 1000%, and this is not a joke!
Learn how the method intersects when building Andrey Slobodyan.
After getting acquainted with the method, you will have only one reaction: “How elementary it all is!”

More about the material

Interesting! Go to the store page for a purchase!

[Rakarskiy]

For information! I don't impose myself on anyone, my work is presented in Russian. Hydroelectric power station in a bucket of water, without a dam or waterfall. I checked all the calculation methods several times, and the output data! This corresponds to all the rules of academic physics and the requirements of the law of conservation of energy in the Bernoulli equation. I'm not raising the price, I didn't come up with anything, I just calculated the optimal design. This book is a summary of how I made a mistake, how I finally found a solution. The material is accompanied by spreadsheets with the specified calculation algorithm (just insert the source data). To properly use a Pelton turbine that uses a microhydroelectric. For the calculation, I took the parameters of the Chinese microelectric power plant (they put their parameters on the display) and logically calculated, having previously studied and sifted a lot of information on the topic. The optimal formula for calculating the torque on the turbine shaft is derived. I'm just surprised how easy it is .

THE SECRET OF WATER PRESSURE. MINI HYDROELECTRIC POWER

https://rakatskiy.blogspot.com/2020/07/blog-post.html

[Rakarskiy]

My book is devoted to the main secret of an autonomous hydrogenerator, which eliminates all the contradictions of the hydraulic circuit and makes it possible even to make it yourself.
A book in English with a calculator (in an Excel workbook) to calculate the system.
Everything you can buy. To be done: a tank (in the dimension of a barrel) and a simple hydraulic reducer.
My humble job, now the bad guys can't stop you from making a free power generator.

https://rakatskiy.blogspot.com/2020/11/autonomous-hydro-power-plant-for-home.html

https://plati.market/itm/3039038?lang=en-US

[BroMikey]

My book is devoted to the main secret of an autonomous hydrogenerator, which eliminates all the contradictions of the hydraulic circuit and makes it possible even to make it yourself.
A book in English with a calculator (in an Excel workbook) to calculate the system.
Everything you can buy. To be done: a tank (in the dimension of a barrel) and a simple hydraulic reducer.
My humble job, now the bad guys can't stop you from making a free power generator.

https://rakatskiy.blogspot.com/2020/...-for-home.html
https://plati.market/itm/3039038?lang=en-US

Why does it work? How can it be self running? You are pumping water onto a paddle wheel and friction losses can be expensive. I hear special cup vanes increase energy? Another book?

[Rakarskiy]

You know how it works, you studied physics at school. Everything is based on the law of conservation of energy and the Bernoulli equation. To learn to build you need to read. If you feel sorry for such a small amount, you can do the research yourself, study the postulates of hydraulics and make a decision. Lately, many people think that intellectual work is useless. when one of my readers completes its construction, the price of the material will rise, but its composition will not change.

Do you really think these generators are from Canada, a Scam? http://www.gdstechnologies.ca/index.html
Portable Generator Runs on Water!! - YouTube
6188086.jpg
I can tell you exactly how this is possible.

[BroMikey]

Made with a paddle water wheel, paddles look like spoons with 2 v splits. Hydropower. I do not understand the principle. Magic? Donno. Tesla patents?

[BroMikey]

Pelton Turbine generator

[Rakarskiy]

Good time, seekers and interested ones.
I am spreading the material of my book about the secrets of an autonomous hydrogenerator.
Technology should create good, not kill. In practice, they contribute to killing. We need to change that.
Best regards, Serge Rakarskiy

https://drive.google.com/file/d/10GudcqqKmmcF402vLxZHp5L6LWdTYoek/view?usp=sharing

РЁС-ВЕДРО.png

[Rakarskiy]

My reader, who advised to lay out everything openly, https://drive.google.com/file/d/10Gu...6LWdTYoek/view
and other hydraulic engineers who were impressed by this design identified the expansion diffuser in front of the outlet as the most vulnerable point in the design. Yes, indeed, in a simple calculation, everything is simple and does not contradict the laws of hydraulics. But the coefficient of pressure loss, or rather speed, depends on the cavitation processes. And the most interesting thing is that all this is well studied, there are corresponding solutions.For example, the diameter of the maximum expansion is 182 mm, the diameter of the outlet pipe of the pump is 75 mm, the length of the diffuser cone, with an expansion angle of 6 degrees, will be about 1200 mm. Hydraulics claims that a long diffuser can cause cavitation, which will increase flow resistance. And one more detail - it is technically very difficult and expensive to make such a transition with polishing the inner surface in the mirror. Again, there are solutions for the cascade variant of the diffusion transition.Firstly, we can increase the angle and decrease the length of the diffuser (cavitation at a cone angle of 10-50 g starts from the middle, which means that in the middle (or better, closer to the inlet diameter) there should be a pipe section of the transition section. If at an angle of 40 degrees, the drag coefficient ξ = 0.5, then at 6 degrees = 0.07 (but the possibility of cavitation remains.) I calculated the cascade in four links, received the indicators in each section: (1 section 20 degrees) ξ = 0.046; (2 section 20 degrees) ξ = 0.043; (3 section 25 degrees) ξ = 0.042;(4 section -15 degrees) ξ = 0.041 It turns out that even if the length of this section increases to 1500-1700 mm, the resistance to fluid flow decreases. reality, it will decrease.In the nozzle zone at the corresponding angle, a negative resistance is obtained equal to ξ = - 0.68
PS. A hydraulics worker at an oil refinery wrote to me about the cascade implementation of the diffusion transition task. They have such tricks when pumping gasoline into the channel. Later, I found a brief reference to this possibility in academic sources.

[sparky53]

Hello Serge,
I thank You for making the booklet You wrote publically available for free.
Serge, I have read in Your booklet and You seem to propose a closed-loop hydro-electric power plant for everyone that is interested in free energy devices to power a home (for example).

I would like to ask You therefore - Do YOU already have build a working device that is showing a "COP" (Coefficient of Performance) > 1 ?

I am curious because You propose to let a centrifugal pump run with maximum flow rate and minimum pump head produced : (run at the very right-hand corner of the pump-diagram)

(a Quote from Your booklet: )

"...To ensure the ease of operation of the pump, it is necessary to ensure the differential pressure in the inlet and outlet of the pump, which should tend to zero.

(End of Quote)

Serge, as far as I know this is when the electrical consumption of the pump-drive-motor becomes maximum and even can destroy the windings in the electrical motor (heat melts the insulation of the wires of the winding in the motor).

If I get You completely right, Serge, then You are saying that a clever arrangement of converging and also diverging pipes (nozzles) will not only convert the static pressure energy of a fluid into kinetic energy (at the exit-nozzle) but also the "brownian-molecular movement" of the molecules of the fluid
(which is a representation of the heat-energy / temperature contained in the fluid)
- can be "organized" into a conform flow-pattern with the help of "DE-LAVAL" Nozzles (for example) and thus You can harvest "a surplus" of energy out of a mass of water that is being pumped around in a closed loop ?!? (and is being directed towards a PELTON style water turbine blade wheel).



Well, if it works Serge, then You definitely showed the world a way to ease the production of environmentally friendly energy.


sparky53

[Rakarskiy]

Hello Serge,

Well, if it works Serge, then You definitely showed the world a way to ease the production of environmentally friendly energy.


sparky53

Unfortunately, the micro-hydroelectric power plant with a converging diffuser transition turned out to be wrong. In a pipe with the outlet water pressure from the pump, a hydraulic accumulator is required with an increase in pressure in front of the nozzle. I left this topic because I have no time to deal with it. At the moment I'm working on an excellent version of the simplest transgenerator in dynamic and static execution. The first to build transgenerators Tesla 1889 (dynamic) and Figuera 1902(static).
After almost five years of working out their version of the transformer, it turned out that all this had long been invented. And that's why they don't make it public, I think you know. Free electricity is the enemy of the consumer world-eating market.

[sparky53]

Unfortunately, the micro-hydroelectric power plant with a converging diffuser transition turned out to be wrong. In a pipe with the outlet water pressure from the pump, a hydraulic accumulator is required with an increase in pressure in front of the nozzle. I left this topic because I have no time to deal with it. At the moment I'm working on an excellent version of the simplest transgenerator in dynamic and static execution. The first to build transgenerators Tesla 1889 (dynamic) and Figuera 1902(static).
After almost five years of working out their version of the transformer, it turned out that all this had long been invented. And that's why they don't make it public, I think you know. Free electricity is the enemy of the consumer world-eating market.

Hello Serge,
Thank You for clarifying that this micro-hydroelectric power plant turned out to be wrong.
Also that is a very important information so that interested people do not invest their precious life-time into
subjects that ultimately are a dead-end street.

I also think the pareto-principle applies to the trials to "invent" free energy processes :
nine out of ten trials might fail, but one try out of ten trials might be a success.

So I wish You maximum success with Your "transgenerator" trials. (Whatever a transgenerator is ...)
I have heard (or read) that Clemente Figuera was also quoted by "Viktor Schauberger" as having successfully constructed a free- energy device but its function was never disclosed to my knowledge.
Just as the "engines" or "devices" from Viktor Schauberger - nobody knows how they are supposed to work or whether they have ever worked at all.

Serge, have You ever looked into the "Richard Clem engine" ? (it is also one of the processes using a fluid, in this case cooking oil as the working fluid ...)
(I think there is even a very old article on that in the Energetic Forum.... You need to use the search function of this FORUM to find the article/thread.)

sparky53

[Rakarskiy]

[Rakarskiy]

Greetings to everyone fighting for their freedom and nation, for democracy in Kyiv!
At the end of 2025, I learned about inertial autonomous generators from Dubai and Turkey. They operate on the principle of two flywheels.
I made a public post about all this on my channel:?

https://www.patreon.com/posts/flywheel-for-100939183

https://youtu.be/j54_HSFToLE?si=-xkY5HjeDuejuwmS

https://youtu.be/rge6N96eFgo?si=Y3TE4HReR51ErPKK

https://youtu.be/PPQ9HH0hdJw?si=WMceqGfQpTkfXR2r

The first delivery of an inertial generator from Turkey was planned for the end of 2025, but this did not happen due to opposition from the energy corruption lobby in Ukraine. These are traitors who are enemies of free energy.

I have questions because it is a very controversial engineering solution, but it exists. I have prepared the publication.

An independent publication that reveals the technical features of such a device as an inertial flywheel. The purpose of the publication is to show how to use the flywheel parameters to create an autonomous device for generating electricity without external force or energy. The publication is supplemented by a calculation algorithm in Excel. It explains step by step how to use the calculation algorithm. The publication provides examples of calculations, indicates what technical tasks need to be solved. Illusions will disappear, only logic and knowledge of how it works and how to do it will be filled in.
Warning: if a person who wants to purchase the material does not have the appropriate professional skills or is not sure that he will be able to organize a team of different specialists and find the necessary funds, there is no guarantee that the appropriate inertial power plant will be built.

The publication provides examples of appropriate engineering solutions with an inertial magnetic rotor. It also analyzes how the acceleration system could be implemented in the legendary Earth Engine 2019 magnetic inertial generator system in the USA, and explains why it is a magnetic engine and why there is a flywheel in the system.

The publication is an English-language e-book in PDF format, 53 pages long, and an Excel book with already entered calculation algorithms. All you have to do is enter the appropriate data.

If you are not sure that you are getting what you want, do not waste your money. This is for thoughtful and risky researchers.

https://www.patreon.com/posts/148622861?pr=true&forSale=true

My paid subscribers (10 USD) get access to this publication and our others by default.