Peter, whatever happened with Eric P. Dollard?

[boguslaw]

Here is a Russian 1960 patent, by I. K. Vul'fel'dt, translated by the USAF "Armed Services Technical Information Agency" and given to the CIA, NSA, NASA, Rand, etc...

Talking about Non-Linear capacitors, as Eric Dollard says, achieves over unity, in this case by transforming heat energy into electrical energy.

http://www.dtic.mil/cgi-bin/GetTRDoc...c=GetTRDoc.pdf

50 years later we are still discovering this interesting phenomenon

When can we start powering our homes with this technology?

Regards, Mike R.

Thank you. Yes,correct parametric resonance is working like a pump.However mentioned method with changed capacitance in time is hard to realise (need a shutter to screen heat source) . Much easier is to change inductance with synchronization of LC circuit state (at correct moment) - think about it. Like a pump or siphon.Don Smith is telling this all the time - parametric oscillation you must have to extract free energy from ambient source.

[vrand]

Here is a Russian 1960 patent, by I. K. Vul'fel'dt, translated by the USAF "Armed Services Technical Information Agency" and given to the CIA, NSA, NASA, Rand, etc...

Talking about Non-Linear capacitors, as Eric Dollard says, achieves over unity, in this case by transforming heat energy into electrical energy.

http://www.dtic.mil/cgi-bin/GetTRDoc...c=GetTRDoc.pdf

50 years later we are still discovering this interesting phenomenon

When can we start powering our homes with this technology?

Regards, Mike R.

[phi1.62]

I managed to find a copy of "Report on recent research on nonlinear oscillations" on NASA's technical database. I believe that this report was an update of "On the Parametric Excitation of Electric Oscillations":

http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19700002202_1970002202.pdf

[vrand]

I have a device, built for the Army Air Corps during World War 2, A/N number PP-18/AR Power Converter, which self-sustains the electrical system in my car. It uses the same theory of operation as Chris’s device but involves a different mechanical implementation utilizing a vibrator, several capacitors and 12V and 24V batteries that are connected in parallel through the device, rendering them as one.

73 DE N6KPH SK

Hi Eric,

Where can one find more info on the PP-18/AR Power Converter? Nothing came up on Google.

There is a large demand for generating electricity for homes and business here in "the big sink" of Southern California.

Best Regards, Mike R.

[vrand]

Found this document at the San Francisco Tesla Society website which contains a number of articles about Eric Dollard, as well as his attempts to preserve the Bolindas RCA Radio site:

https://<b>http://sftesla.org/sfts_p...nas_01.pdf</b>

Interesting read, thanks

The Maritime Radio Historical Society (MRHS)

Maritime Radio Historical Society

Radio Archeology

The sites of historic radio stations surround us, especially along the coasts. As part of our project to record and preserve our maritime radio heritage, MRHS members try to locate these sites and document what is there now. Armed with maps, GPS navigators, historic records and, at least in one case, the plank from a shipping crate, we've had some remarkable success.

Alexanderson Plaque at the Bolinas RCA Radio site



The plaque reads:

This Station Was Designed and Constructed by the

RADIO CORPORATION OF AMERICA

The 200K.W. High Frequency Generating Alexanderson Generating Equipment was Manufactured and Installed by the General Electric Company

The General Engineering and Construction Work was Performed by the J.G. White Engineering Corporation 1920

Regards, Mike R.

Eric P. Dollard should have a plaque made for his work in Tesla's Longitudinal Electricity at The Maritime Radio Historical Society

And of course Eric's own website
Home :: AMERICAN MARCONI FOUNDATION

[boguslaw]

Overunity parametric variation circuits have been around in the FE community. Here's something that will feed you for a while:

PARAMETRIC POWER CONVERSION by JL Naudin

In this age of semiconductors the variations can be done using solid state components and thus decrease the size of the setup considerably.

This is also the same bandwagon Steorn wants to cash in on with their solid state orbo. It will be interesting to know if they tried to patent concepts that are in the public domain.

NO WAY!!! Steorn CANNOT DO THAT! Though they are trying and we have to think clearly to stop it.If we don't do that, next time they'll patent air and water.

Here you have free energy :
EMFC Explosive Magnetic Flux Compressor FCG Flux Compression Generator EMP Directed Energy Weapons Active Duty Military Army Navy Air

"The second concern is known as the late-time EMP effect, which occurs around 15 minutes after the detonation; the EMP that surged through electrical systems creates localised magnetic fields. When these magnetic fields break down, they can cause electric surges to travel back through the power and telecommunication systems, this effect is a known concern.
"

[baroutologos]

@ jules tresor,

My views are well known to this site. All DVD and book sellers, are just merchants. They probably have not a single clue about real free energy devices.
If they do , they are also mis-informants since noone is assisted by their teachings to have a humble working model since decades now.

There is an American saying that goes " You fooled me once, shame on you, you fooled me twice, shame on me"

[broli]

Dave, I think you are exactly correct with your comments.

"RPM is the key", all Tesla's devices spun at some horrible velocity" - E.P.D.

"Most are clueless about the importance of the Variation of Inductance and Capacitance with respect to time – and synchronous parameter variations". - E.P.D.

Here is one of the best tips that I have ever learned from being on this forum.

How to vary capacitance with relation to time?
How to vary capacitance as quickly as possible?

Chris Carson's device is a good start, 1000pF variable capacitor, balanced and spun (in air) at ~10,000rpm. Are there any other possible ways of doing so?

Here is truely a worthy area of much thought & experimentation!

Overunity parametric variation circuits have been around in the FE community. Here's something that will feed you for a while:

PARAMETRIC POWER CONVERSION by JL Naudin

In this age of semiconductors the variations can be done using solid state components and thus decrease the size of the setup considerably.

This is also the same bandwagon Steorn wants to cash in on with their solid state orbo. It will be interesting to know if they tried to patent concepts that are in the public domain.

[broli]

Dave, I think you are exactly correct with your comments.

"RPM is the key", all Tesla's devices spun at some horrible velocity" - E.P.D.

"Most are clueless about the importance of the Variation of Inductance and Capacitance with respect to time – and synchronous parameter variations". - E.P.D.

Here is one of the best tips that I have ever learned from being on this forum.

How to vary capacitance with relation to time?
How to vary capacitance as quickly as possible?

Chris Carson's device is a good start, 1000pF variable capacitor, balanced and spun (in air) at ~10,000rpm. Are there any other possible ways of doing so?

Here is truely a worthy area of much thought & experimentation!

Overunity parametric variation circuits have been around in the FE community. Here's something that will feed you for a while:

PARAMETRIC POWER CONVERSION by JL Naudin

In this age of semiconductors the variations can be done using solid state components and thus decrease the size of the setup considerably.

[Jules Tresor]

Difference of point of view ...

1# You leave in US in a comfortable house and environment, you don't need free electricity that much, your bills are not a too big expense.

2# You leave in a village in a poor country, you don't know what electricity is. But if you had something to light your house at night, or to run a small engine to move around or to pump water for your small land, you could stop starving for food. You could develop your production, bring it to the near by town with your small electric tricycle.

But more important, you could desalinate sea water to irrigate your desertic land, and to give water to drink to your people, to your animals.

Why rich countries are developed, because they have energy to produce goods. Without energy you just can't make roads, can't run trucks, can't run boats, can't live decently ...


Have they already spent a few months in such a poor place, to see and FEEL what it's like on a daily basis, and how hopeless is the future and dark the horizon from such a place ??

We are talking about the majority of humankind that are living in conditions worse that your pet.
No pipe water, no clean water, no electricity, no transportation, no electric devices, stone age like !
Really they don't care about your consciousness, they just want a chance to grow up, to develop, and that goes through access to cheap ENERGY.

Those who say THEY ARE NOT READY, are not those who HAVE BEEN THERE HAVE SEEN THAT.
Unfortunately they have THE SOLUTION to others problems, but from their point of view they see that they better not give them the solution ...

Who is right, who is wrong ? Both are right, both are wrong, but one has an easy life, the other doesn't have enough food, live in a zinc house, with no toilet, no electricity, no car, no fridge, no TV, because there is NO ELECTRICITY there ...

So pleeeease, to really take the right decision to give or not to give FREE ELECTRICITY to mankind, go and FEEL how it is THERE.

Thanks and good luck.

PS: Even in every developed countries there are very poor people that could do much better with free electricity.
Who are you to decide their access to free electricity ?!
I think it's greed, just greed.

Proof is that they are all selling staff on the subject ...
And even what you buy is just a few percentage of their knowledge, they keep the real picture, and they ask you to experiment by yourself.
How many thousands of dollars I have spent on those experiments !!!

With the full knowledge I could have built working models and give them in those very poor countries I have been, for the locals to reproduce these devices.
But NO, they want me to experiment and waste more money on research that will never end. And buy their latest book or DVD.

Just GREED in my humble opinion.
But it still better than nothing, so we don't throw the stone to them, we keep silent, hoping that one day they make their COMING OUT and disclose everything they know.

God willing it will happen one day.

[zestor]

Pandora's Box

Lindemann, Dollard and others that have successful devices think that mankind is not ready for energy free of charge ...

We may be ready for free energy, but we may not be at all ready for the other potential consequences of the derived technologies that will emerge once we begin to really understand this way of thinking. The more I think about it, the more I am convinced this could open Pandora's proverbial box. I have of course no proof, because I do not yet understand what Eric et al. are saying exactly, but one could easily think this goes into the realm of modern day alchemy and possibly even manipulation of time. Tesla already proved strange effects were observed when he did his experiments.

IMHO, until we get rid of the monetary system, we are probably not ready for those consequences. But it may be that providing the world with free energy will start to do just that. Hey, isn't this a causality dilemma?

So maybe that's why they are so reluctant to teach?

just my two cents,
Z.

[Jules Tresor]

@all
Lindemann, Dollard and others that have successful devices think that mankind is not ready for energy free of charge ...
There is no hope they help change this world !

But have a look on Lindemann's DVD, they are instructive. Also those from Bedini.
You will then understand the concept discovered by Tesla to convert the Electrostatic field to usable Electricity. (Tesla Impulse Tech)


IMHO it's like saying people must stay poor in Third World, if not they will disturb the planet too much.
Ok, thanks for the planet, but those people are suffering daily from hunger and lack of comfort and facilities.

I suggest them to put their trust in God (In God we trust) and give away ALL there knowledge on the subject, to give a chance to bring the humans out of poverty to give them a chance to take interest in more spiritual activities.

You are evolved soul/person because you had time in your life to think and ponder about life, but those who battle daily to survive and still are hungry HAVE NO TIME TO MEDITATE ON EVOLVED MATTERS.

Give the people a chance to evolve by supplying them minimal comfort in life, and then they will slowly take interest in phylosophical ideas ! As we did.

If you scare the military takes those technologies you are wrong, they have it since long ago !

Go and stay 6 months in a third world country, to see HOW it is really, and you might then change your mind !
Give them free electricity and they will start to evolve, as we did !

Just my 2 cents of phylo

[elias]

Hi,

Well, Thanks for bringing this up, I was thinking about 2 years ago, if one charges capacitor C to a voltage V and then changes the capacitance to about 2C then wouldn't we have extracted energy from the vacuum and then a sceptic voice said in my head, No! you will need energy to change the capacitance or maybe you will lose the voltage level after you do that, but I was not so sure after all. But now you made me think what if the energy needed to change the capacitance is negligible to what can be extracted from it? What if the voltage remains the same after you change the capacitance? What if Testakita operates in the same principle?

This is a scenario: You have two parallel plates which are charged when no dielectric is present and then you discharge it when a dielectric is moved in between the plates. It must not be so difficult to do it. just imagine a rotating motor moving the dielectric in and out of the capacitor, and charging the capacitor without a dielectric and discharging it after a dielectric moves into the capacitor.

Just some triggered thought I had some years before

Elias

[SuperCaviTationIstic]

if you look at the way an emp bomb made from a Magnetic Flux Compression Generator works, it varies physical length of the wire with time, effectively varying self capacitance, and inductance....look at the output

EMFC Explosive Magnetic Flux Compressor FCG Flux Compression Generator EMP Directed Energy Weapons Active Duty Military Army Navy Air

what if you had a coil with a brush that moved up and down in it to make it of varying length? could that be analogous to the variable capacitor generator? Or a coil that is a spring that stretches and compresses, to only vary self capacitance?

[Raui]

Dave, I think you are exactly correct with your comments.

"RPM is the key", all Tesla's devices spun at some horrible velocity" - E.P.D.

"Most are clueless about the importance of the Variation of Inductance and Capacitance with respect to time – and synchronous parameter variations". - E.P.D.

Here is one of the best tips that I have ever learned from being on this forum.

How to vary capacitance with relation to time?
How to vary capacitance as quickly as possible?

Chris Carson's device is a good start, 1000pF variable capacitor, balanced and spun (in air) at ~10,000rpm. Are there any other possible ways of doing so?

Here is truely a worthy area of much thought & experimentation!

Respect to you all, especialy Eric.

I hope he soon posts here again..

Alternating between capacitors in series and parallel changes their capacitance a great deal Oh and what do you know, that's how Eric's device worked in his car!!

Raui