Peter, whatever happened with Eric P. Dollard?

[WeThePeople]

Look, Eric,
My wife and I will gladly accomodate you as
a permanant guest without rent (NOT KIDDING !)
as long as you will take the time to show me
your thinking and methods on all matters asked !

I have heard tales of you living out of your car.

No humbling needed, no judgements made.

Paul

[lamare]

Does anybody know where I could see (the missing) figures 1, 2 and 3 from this article (or describe them to me)?

Introduction to Dielectricity and Capacitance | Journal of Borderland Research

pt

It's in my archive

http://www.tuks.nl/pdf/Eric_Dollard_Document_Collection/Eric%20Dollard%20Introduction%20to%20Dielectric%20and%20Magnetic%20Discharges%20in%20Electrical%20Windings.pdf

[pault]

Missing figures

Does anybody know where I could see (the missing) figures 1, 2 and 3 from this article (or describe them to me)?

Introduction to Dielectricity and Capacitance | Journal of Borderland Research

pt

[lamare]

Indeed, Eric as well as Nikola provided us with many insights. I am doing my best to understand them, and if I may say so myself, I do understand quite a lot of their achievements, at the very least the basic principles.

You may want to head over to the thread about Tesla's magnifying transmitter and read how that is actually supposed to work. I included many references to study and learn from. For that reason I also published Eric's books on my website in my archive: Directory contents of /pdf/


Update:

Amen, brother, amen!

As I said from my mobile above, both Dollard and Tesla provided us with everything we need, indeed. But you have to actually read their papers and books and try to understand them.

Everything I could get my hands on by Eric Dollard can be found at my server: Directory contents of /pdf/Eric_Dollard_Document_Collection/

I know these are still copyighted, but as far as I am aware, Eric doesn't mind this stuff being shared, as long as we're not trying to make money with his work. To me, it is an honor to be able to make these works available for all for free. I am very greatful for this information and I am trying to make them available in fully digitized form, starting with the Theory of Wirelss Power: Tuks DrippingPedia : Theory Of Wireless Power

I finished about 75% I guess, and added some further notes and reference you can follow for further information here and there.

I also made a page with Eric's post on this forum, enhanced with some links and pictures from a.o. the Rotary Electrostatic Converter built by Chris Carson:
Tuks DrippingPedia : Energetic Form Posts

And a link to a YT video with transcript on a lecture:
Tuks DrippingPedia : Sbarc Lecture

I also have some audio files with interviews with Eric:
Directory contents of /audio/Eric_Dollard/


If you want a quick intro into Tesla's Wireless Transmission system, you can read these posts, which draw very heavily on Nikola and Eric's work:

http://www.energeticforum.com/renewable-energy/8466-teslas-magnifying-transmitter-replications-3.html#post147267

http://www.energeticforum.com/renewable-energy/8466-teslas-magnifying-transmitter-replications-3.html#post147350

Oh, one more thing: If you are able and willing to help a hand with the digitizing process, or spot an error in the wiki, the password is the name of this forum, without the "forum" (and the "www / .com") and then a 3 for the second e. Especially the hand-written books are a lot of work to digitize (http://www.tuks.nl/pdf/Eric_Dollard_...%20Dollard.pdf and http://www.tuks.nl/pdf/Eric_Dollard_...%20Dollard.pdf ), because these will have to be done by hand. Fortunately, the wiki supports math using LaTeXMathML (which needs a plugin on Internet Explorer), but that also needs some getting used to. Some examples at: Tuks DrippingPedia : ASCII Math Sandbox.

Once the TOWP is finished, I will probably go for the condensed intro into Tesla coils, which I already ran trough the OCR reader: http://www.tuks.nl/pdf/Eric_Dollard_...esla_Coils.pdf - this is an older version, my current OCR version is finished including (most of?) the faster than light article. So, if someone is willing to add that to the wiki, please drop me a mail at lamare over at the gmail dot com domain and I will make the latest version of my digitizing efforts on that one available.

[Turion]

There are many of us out there with little but a basic understanding of electricity and attempting to read and understand much of the material that is required is far beyond me. Which saddens me, because I will still attempt it, but I know that it will be a long time before I understand it enough to build anything meaningful. And to me that is the problem.

There are so many of us who would build if we had a decent set of directions, but it seems that those who take the time to teach at my level are in it for all the wrong reasons. So many are out to sell information and make money. My hope is that some day, someone will appear who will take us step by step through the process of building something that will provide us with free energy. Some of you consider that spoon feeding. If I was the only one who wanted this technology, I would agree that I don't need or deserve to be spoon fed. But I think about the people who are too old to learn, like my parents. People who need this technology now, not in three years when I have finally figured out what Eric Dollard is talking about, if I ever do. People without adequate drinking water because they have no electricity to pump it. How do I explain to THEM why they have to wait? I know many of the people who have worked in the area of free energy have been mistreated. But there is mistreatment, and MISTREATMENT. There are children suffering and dying every day for want of clean water that this kind of technology could supply. Which brings me to my second problem. Do I spend what money I have trying to build things to solve this free energy puzzle or use that money to assist those so desperately in need? I try to do BOTH, and so I don't have all the money I need for experimenting. It's hard to spend money for coils of wire when you know children are dying of thirst. For those of you working so hard on the puzzle, and who are willing to share, I salute you all from the bottom of my heart. For those of you who have the answers, if you truly do, and do not share, how can you justify that at all? Ever? I certainly could not. Not even if I felt I had been mistreated. I might be bitter for the pain caused to myself and my family, but you only get one chance at this life to make a difference, and even if no one else ever knew the contribution I made, I would know. And for me that would be enough.

Sometimes you have to give a man a fish to keep him alive long enough to teach him to fish. Just my two cents.

Earlier in the thread Aaron talked about using pressed earth bricks for cheap home construction. Here is info on how to build your own machine to make the bricks. Thought some might be interested in that, and in the other machines you can build for a small community. CEB Press Intro - Open Source Ecology

[h2ocommuter]

Wisdom yes wisdom

Ah, a stroke of truth, Studiing and learning to study the correct information is the absolute right way to do it.
I am so behind and learning everything in such an abstract way. I find so many components of electricty handled and used in various ways; The math and higher math are huge steps beyond what I can organize mentally correctly. outstanding post MJL it will probably help Eric feel the contemporary love you speak of.
I do baby steps, compile notes from Erics videos. try to find similarities in what others have tought and are using that resemble the masters explanations and examples. Read Tesla and watch how others are applying potential, amperes, Freq, Disruptive discharges and the like, looking for similar longitudinal electric and hunting down and listening to anyone that uses Tesla's, and Erics enunciation of electrical terms. this tells me they are at least trying to immulate the best.
While keeping all of this giong in my mind I realize there is a huge amount of magic that is left to find.

Good luck everyone.

[carmine]

Respect too MJL for your well said post. as well to Mr.Dollard

[citfta]

I agree completely

To MJL,

Thank you for a very well thought out post. I agree completely with you.

Carroll

[Armagdn03]

Really damn well said.

[MJL]

[h2ocommuter]

Urgent Last go arround....T-Rex

Ok, I am taxed to the max. I am pushing so hard times are getting short and not much time for minutia. i am so proud of everyone who does the research and dillagence to make these things happen.
here is probably my last post. the government will probably close everything off before we know it. Probable down time ? use a magnetic metal to stop EMP.... from mass coronal ejections for your electronic equipment... store your data...

Iwill be sending all my research into a secure holding place on 25 GB discs Newegg.com - Vinpower Digital 25GB 4X BD-R 50 Packs Disc Model OQBDR04LT-50

Sorry this note is somewhat convoluted i do not have time or the inclination to comparmentalize everything i am sending out. Just know It is with honorable intent. h2ocommuter.

My rendition of BB's racing boat electrolyzer is not finished yet so I apologize. inflation has made my dollar nearly useless. but that is what I get for allowing the COLA's to go on for ever. But anyway It looks nothing like Bobs Boat system except for the math. And that is 7680 Square inches "sin", per cell, wet bath 2 volt per cell. X 5 or 6 X 2. well that is from memory.
I am so busy trying to get my research archived I have little time to tune for details like that.
I have talked to Fred Wells, AKA; Fast Freddy the other day and am working toward the direction he sent me. I should be ready to contact him in the next few days after I complete the required tasks. Pray for me It is God's speed I will be needing.

I need to understand what causes threshhold Please! If you truly know please reply if not, don't. Zane Fast Freddies system is holding the keys to Cold Fusion and I want it! for humanity. If we become extinct this go arround it would be a shame. 3600 year orbit for this celistrial object.
It looks to me to be a plasma type object and in that cace very few people can even understand what I am saying. T-Rex will...... I need to get him covered........... I am trying to get his handle to the radio men at this group. I have spent hours this morning and can't hardly think.
Be well. Zane

Please educate yourself to these immediate possibilities. Make up your own mind about your plan of action and decide what is prudent for you to do.
This is very much an "ELE", Extinction Level Event we are being hit with.
The NASA viewer should be your main time line gauge, next and possibly more important should be where the rubber meet the road. i.e.: what is happening in front of your vehicle. Is the government shutting down the roads and or is mother nature unleashing a deluge of obstacles that will preclude you from "You" getting to your destination????
Humm?
Good Luck everyone.

the views and possible event scenarios are each persons due diligence to evaluate and no one should make that decision for you. you are now informed. Choose wisely grashopper.

may you use your Hex controller to do many wonderful things. Zane, [email protected]

YouTube - ‪ELEnin Dwarf Star Warning September 26, 2011‬‏

Planet X Brown Dwarf Research on Paltalk | Education - Other

JPL Small-Body Database Browser

@ Zane - The name's Sputins, with an ess..
- Don't worry too much, I also struggle with Dollard's maths and algebra. You have a good attitude anyway. I find listening to the Dollard MP3 on Electric Waves helpful in understanding the maths, or at least the concepts, more importantly. Yes do experiment with the LMD tests, try rectifying the output.. Charge a secondary capacitor, discharge it when it's just starting to re-charge. -Careful though you might get zapped by a Longitudinal-Electrostatic-shockwave in air. (As I did)!
I 'm sorry i didn't quite understand your original question? - However the question I originally asked, was how to vary capacitance as quickly as possible? (Now this should go in the Parametic Variation thread). - As Dollard told us & later Raui also said, switching Capacitance between series and parallel may have good effect. (?) Using relays, vibrators or maybe transistors..?

Another way which would be far more difficult would be to change the dielectric constant (material) as fast as possible, - I.e. a gas or a vaccum - however it probably can't be done fast enough for any noticable effect? Perhaps pulse the container with gas or vacuum? (Maybe? - I have had some thoughts however)..

I'll share another thought I had, which I haven't had time to experiment with yet, which is to use a variable capacitor, (I.e. The Chris Carson method - and we'll refer to it as that in honour of him), only advance it slightly by housing the variable capacitor in a vaccum environment, or in a gas of higher dielectric strength. (Maybe Nitrous oxide for example). May give a higher capacitance, & at higher voltages and thus greater a variance? - I have some through-wall bearings from some old X-ray equipment. I.e. one side is in a hard vaccum and the other side being motor driven. - It's possible to do! - It might all be in vain however as it may be nessasary to keep the dielectric value at "unity" 1.0 as to better interact with the environment?

@SilverToGold - I loved your post and comment's - I 100% agree, awesome reply!

@Raui, - hope you are well, sorry for my past over enthusiastic PM.

- I have been putting together an eddited, (& slightly adulterated) audio-compilation of Dollard's media material, which when finished i will post the download link here, for the hardcore Dollard enthusiusts!

I'm getting married soon! So most of my experimentation is somewhat on hold for the moment..

Regards
Sputins.

[Sputins]

maths & algebra

I am sorry I cannot do the math. I have looked into the Eric Dollard equasions to dugh,,,,, look at them but not much hope for this engineer, That original text was from Putins I think. Moreover when I replicate some of the LMD tests and try to adapt some "faster than light" " longitudinal " electricity I will be on the path I have chosen to work.
Zane

@ Zane - The name's Sputins, with an ess..
- Don't worry too much, I also struggle with Dollard's maths and algebra. You have a good attitude anyway. I find listening to the Dollard MP3 on Electric Waves helpful in understanding the maths, or at least the concepts, more importantly. Yes do experiment with the LMD tests, try rectifying the output.. Charge a secondary capacitor, discharge it when it's just starting to re-charge. -Careful though you might get zapped by a Longitudinal-Electrostatic-shockwave in air. (As I did)!
I 'm sorry i didn't quite understand your original question? - However the question I originally asked, was how to vary capacitance as quickly as possible? (Now this should go in the Parametic Variation thread). - As Dollard told us & later Raui also said, switching Capacitance between series and parallel may have good effect. (?) Using relays, vibrators or maybe transistors..?

Another way which would be far more difficult would be to change the dielectric constant (material) as fast as possible, - I.e. a gas or a vaccum - however it probably can't be done fast enough for any noticable effect? Perhaps pulse the container with gas or vacuum? (Maybe? - I have had some thoughts however)..

I'll share another thought I had, which I haven't had time to experiment with yet, which is to use a variable capacitor, (I.e. The Chris Carson method - and we'll refer to it as that in honour of him), only advance it slightly by housing the variable capacitor in a vaccum environment, or in a gas of higher dielectric strength. (Maybe Nitrous oxide for example). May give a higher capacitance, & at higher voltages and thus greater a variance? - I have some through-wall bearings from some old X-ray equipment. I.e. one side is in a hard vaccum and the other side being motor driven. - It's possible to do! - It might all be in vain however as it may be nessasary to keep the dielectric value at "unity" 1.0 as to better interact with the environment?

@SilverToGold - I loved your post and comment's - I 100% agree, awesome reply!

@Raui, - hope you are well, sorry for my past over enthusiastic PM.

- I have been putting together an eddited, (& slightly adulterated) audio-compilation of Dollard's media material, which when finished i will post the download link here, for the hardcore Dollard enthusiusts!

I'm getting married soon! So most of my experimentation is somewhat on hold for the moment..

Regards
Sputins.

[h2ocommuter]

Math, algebra, Trig, hoopla (=)

I am sorry I cannot do the math. I have looked into the Eric Dollard equasions to dugh,,,,, look at them but not much hope for this engineer, any way That original text was from Putins I think. This is the aproach I am taking with all my testing. consider the written word text I do understand and use my inovation to adapt whatever components I may guess will accomplish somthing I can measure. this is a hoot. Even so I propose many great things have been found this way. Also moreover when I replicate some of the LMD tests and try to adapt some "faster than light" " longitudinal " electricity I will be on the path I have chosen to work.
I think these tests will teach me more than the math ever could. after all the math originated from the testing!

Zane

[Web000x]

You have to understand Einstein is a liar and thief

You misunderstood what I was suggesting.

I am using Eric Dollard's algebra for quantification.

I speak of trying to quantify the Bedini/Bearden jargon (converging negative energy) through the use of Dollard's math. There is no doubt in my mind that John Bedini has built quite a few "free energy" devices. All I am trying to do is figure out how Dollard's math can allow for free energy through commutative transients.

Don't worry. Unless Eric Dollard is a liar, I am on the right track.

Dave

[SilverToGold]

I am really trying to quantify this Bearden/Bedini/Dollard confusion.

Dave

You have to understand Einstein is a liar and thief