Eric Dollard

[orgonaut314]

I am certainly interested in Lyne with Dollard. I have a lot of questions. But the conference is too far for me. Will there be recordings?

[Aaron]

William Lyne

I'm posting this in Eric's thread because he encouraged me to suggest some presentation topics to William Lyne and in several interviews, Eric Dollard has said many of the aetheric concepts that William Lyne shares are valid - much is rooted in the works of JJ Thompson and Tesla. This is a presentation you'll want to see!

William Lyne will be giving a 2 hour presentation at the conference!

It will be a rare opportunity to spend some time with this legend. He is the author of multiple books including Occult Ether Physics and is well known for his work with his Lyne Atomic Hydrogen Furnace.

You can find his full bio and talk description here: 2014 Energy Science Conference

[Aaron]

Eric Dollard Campaign Success

THANK YOU FOR ALL OF YOUR CONTRIBUTIONS AND FOR SPREADING THE WORD!

If you haven't seen the news, together we all raised $26,000 for Eric Dollard's Advanced Seismic Warning System! $25,065 in Indiegogo (so we beat the goal) and almost $1000 in direct Paypal donations plus about $100 from the Teslacoin community.

If you contributed to the campaign and claimed any Perks, they will be honored. Eric will start to write the letters, etc... when he gets back to his lab.

If you have any questions for Eric Dollard, please post them on his Facebook page here: https://www.facebook.com/ericpdollard instead of sending a private message, please post it publicly in the status/updates section that says: Write something on Eric Dollard's page...

If time permits this weekend, I can do an interview with Eric answering those questions.

Also, stay tuned for another up coming interview with Eric that will be shown on a very popular/famous Tesla network.

REMEMBER, you can meet Eric Dollard personally at the 2014 Energy Science & Technology Conference. We also just confirmed that William Lyne author of Occult Ether Physics will also be presenting! Register if you think you want to come even if you can't send payment right away - that will at least lock in your seat. Energy Science Conference - 2014

Thank you,
Aaron
http://ericpdollard.com/

[AstroNod]

Chart Recorder Gould TA 5000

Hello , here Astronod .
The Local surplus have a nice Gould TA 5000 for sale due i buy a lot i can have it for 100USD (75 euro`s ) i did see them in USA 2nd hand for 1295USD .
it have 4 pcs AM 400 cards 4-Channel Waveform Storage Amplifiers.
so it have 16 channels an one CPU board . i might have the special LEMO connectors it can have the normal RS connector to and there some cables with the device .
acquisition of signals up to 35 kHz thats very good .

shipping to usa is a nother problem if its over the 20 kg i could dismantle the power transformers ac or something that easy to reinstall and send it with 2 shippings . price for shipping could be in the 200USD or more
the item is in perfect condition came from a dutch lab to test weapons.
it uses normal chainprintpaper like zigzag there is still paper in the machine the rubber roll is perfect all looks fine. works on 110 and 230volts ac .

here is some data from the internet


Thermal recorder has max. 24 channels, 48 Mbytes of on-board memory

The TA5000 is a modular thermal array recorder with 8, 16, or 24 discrete
input channels and up to 24 Mbytes of memory. The sampling rate ranges
from 2 samples/s to 250 ksamples/s on all channels. A patented 15-in.
printhead contains special circuitry to ensure precise temperature control
of each styli. This results in the best contrast at any chart speed and
grid pattern, with accurately positioned traces and no black zones
anywhere on the chart paper. Other recorder features include storage
capability for multiple setups, real-time trace positioning in percent or
millimeters, chart speed from 0.01 to 500 mm/s and mm/h, overlap or
discrete channel operating modes, and fully programmable IEEE-488 or
RS-422 interfaces. Four input modules are available for use in the
TA5000. The AM800 is a programmable eight-channel dc amplifier with eight
event channels for acquisition of signals up to 35 kHz. Features include
single-ended input, sensitivity from 100 mV to 250 V full scale,
pretrigger from 0% to 100%, auto-calibration, and auto-ranging. The AP800
is a programmable eight-channel dc amplifier with eight event channels for
real time recording. Features include single-ended input, sensitivity from
200 mV to 40 V full scale (250 V in overlap mode 0, auto-calibration,
auto-ranging, and variable sensitivity with resolution better than 1%.
The DP800 is an eight-channel digital data input module with 12-bit
resolution and peak signal capture capability. The DP800 has input
capability for up to eight independent channels via 16-bit parallel I/O or
DR11 compatible interface. The data acquisition rate is 2 microsecond per
data word. The TD100 is a time code interface that mounts directly onto
the CPU board of the TA5000. Time and date information from IRIG A, B, E,
H, or NASA 36 code is printed on the chart drive or an external tape
recorder. ($11,900; plug-in boards from $2,995--30 days ARO.) Gould Inc.
Test & Measurement Group Valley View, OH Mark Kerchenski 216-328-7157
Fax 216-328-7400

here is a link form the advertisement is on page 9 try to download the link sometimes it won` t work sometimes it will .

http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20100029876_2010032658.pdf

i will send the message also to EPD laboratories .. well i just try it

To contact EPD Laboratories, Inc. or to contact Eric Dollard, you have to do it the old fashion way.

Eric Dollard loves receiving your hand written letters and he'll even write you back!

Send your letters to: Eric Dollard, General Delivery, Lone Pine, CA 93545

well if someone can contact eric or epd labs that fine i am not write a letter due to i post it over here.

A Lab without a @mail box


its a nice chart recorder eric have to see if he can use it he might want a nother type of recorder .

Good luck with the Advanced Seismic Warning System - Tesla Style

regards ,
PD7Z / Astronod

[orgonaut314]

@Astronod. Think you are right about those cellphones. There is a whole area of living things (bions) that we know little about. Reich found out that you only needed to make the right conditions to create bacteria. We think bacteria come in through infections only. That is not the case. The are created from the aether with warmth and sunlight and some carbon inside your body too. Normally you keep your body healthy giving it the right radiation but if there are emotional blocks than some organ might die and the life forms go their own way.

[orgonaut314]

Hi orgonaut314:

It is interesting to note that the Lakhowsky Multiple Wave Oscillator (MWO) had a very broad frequency spectrum covering possibly all the frequencies used by Dr. Rife.
I have built two of the MWOs one with Erick's log periodic antenna and the other with Dr. Bob Beck designed antenna. I got much more action out of Bob Beck's design. First I built one based on Peter A. Lindemann's "The Final Approach", slightly modified, running on a 12 V car battery. Then I built the original Bob Beck design using the T Ford ignition coil and a 6 Volt battery. It works much better than the first one, even thought I need a more precise adjustable spark gap. If someone needs more info, please let me know.

Yes you are right. The broadband way is how Tesla (Hairpin) did it and Lakhovsky. Rife used a sweep I think. But in all this I am surprised that this electrostatic radiation (in my case) gets through my skin that is mainly water. I find it very hard to believe that conventional radiation is getting through my skin. If it did Tesla would have not been able to demonstrate high voltage around his body. I think it is a clear demonstration that there is an eather flow going on and because aether does not have a charge it goes right through the body creating charge in some conducting area's just like aether was flowing from the vacuum tube in Eric demonstration creating charge in a capacitor.
Thanks for the comments! It is good to think together and to experiment together. My driver is almost finished and by the way I'm being delayed I know it is something good. Hope I'll succeed. I am thinking about using an Alexanderson design to make the coil broadband. Hope Eric will share some information.
Also keep in mind that being a little off in the frequency might still work because the Q of the coil. It is a sharp resonance making the power much smaler but it might still work because at this moment I don't know if power is a key at all.

[AstroNod]

Cell Membrane Potential

Hi all , before some people on the forum come to wrong conclusions i would like to put in some info . argonaut , you did charge you cells electrically .
Membrane potential - Wikipedia, the free encyclopedia
Your only defense is your immune system?
Ill cells have too low or too high potential even Cancer virus .
You are a capacitor the body , the TMT send out signals you receive .
Due to you conviction there is you free will and visualization of the mind , thats why placebo does work many times in that way .
However you did the right thing , your intuition.
The frequency list you did show is indeed good , i did try them out, you can use many type of antenna systems TMT Lakhowsky loop antenna mobius antenna they all work on the right frequency , however with harmonics the accuracy of the frequncy must be good . likewise for cancer bx virus 3th harmonic 4,822350MHz i think (remember) must be in the range of a vieuw 10th or 100 Hz min . so a random TMT at 3.2MHz won` t kill the virus in that way . Influenza (1918) - 1,674,000 2nd harmonic is 3.348MHz .
Lakhowsky antenna is wide band ! TMT is very narrow band with small harmonics . Big Loop antenna is wide band like a room size on the ceiling 8x8 meters . Best is to use NO COAX cable specialy with higher power, with standing waves in the coax and time reversal there is a danger of make you self ill. use feeder line 400-600 ohms and antenna tunner . Use small power 200mW to 5 a 10 watts is good .
For Normal Cell voltage the right food is the key like a electrolyte there is conductivity , minerals and salt add conductivity like magnesium zinc selenium in the right dosis . like a good house with bricks and cement a body like minerals and vitamins .
If someone can donate a electron microscope... i could show you the killing of the virus and much more like boosting the growth of `good` cells . a cell phone will give flu like conditions to the blood cells within 15 min at your ear . hands free or very short calls.
The 40M ham TMT prim and sec coils are good tune cap is on place have to make a groundplane and i can test it this week . Make a you tube of it on my channel astronod - YouTube

All the best .

De PD7Z / Astronod

[Tesla_Bcn]

Deeplu Thank You

Tesla-Bcn,
Having read your questions fully and note that this is early 1920s and before Vacuum Tubes (VT) were used, your questions are most difficult to answer.
Much deeper research is required and this may help:

The Turn Of The Century Electrotherapy Museum Tesla Library

Could not find the video unit there and admit that my interest was in the use of VTs.
You would really need to have a unit to copy as the engineering is superb and is simply not available today.
The only thing I can suggest is to wade through the blueprints in the URL above and pull out what you require.

Most impressed with the coils and capacitors as that is where we are at with the Tesla Magnifying Transmitter.
Have been trying to buy a unit here but competition is fierce and postage/freight always a problem.
People are after the simple technology that works - try doing solidstate with any of this!
If I come up with anything new, will pass on,
Sorry I can't help further.

Smokey

Thanks David.

I will write to them directly and see what they say. In Spain in a town named Terrassa closer to my home, there is a museum of ancient technology; it is probably that they still keep an ancient french's Diathermy Machine.

I already see that this will not be easy.

Anyway, I think my hypothesis that the planes transformers made with copper foil must have a high self-capacitance is important to keep in mind. I will let you know of my progress soon. If anyone know a way to calculate the resonance of stripped laminar bifilar copper coil, that will be very useful as well. I think that that algebra, was lost again in some place.

In the meantime, thanks again.

[Nhopa]

Multiple frequency spectrum

Hi orgonaut314:

It is interesting to note that the Lakhowsky Multiple Wave Oscillator (MWO) had a very broad frequency spectrum covering possibly all the frequencies used by Dr. Rife.
I have built two of the MWOs one with Erick's log periodic antenna and the other with Dr. Bob Beck designed antenna. I got much more action out of Bob Beck's design. First I built one based on Peter A. Lindemann's "The Final Approach", slightly modified, running on a 12 V car battery. Then I built the original Bob Beck design using the T Ford ignition coil and a 6 Volt battery. It works much better than the first one, even thought I need a more precise adjustable spark gap. If someone needs more info, please let me know.

[orgonaut314]

On The Rife Machine Report, A History of Rife's there is a book on Rife that tells the truth to what Rife had. Three real Rife Machine were found and were reverse engineered and documented. It is stated in the book the TRUTH to the method. However, it is used to promote equipment that is NOT applying the method in the book!

This is the book I'm taking about: The Rife Machine Report, A History of Rife's Instruments and Frequencies

I hope to be able to share more soon but that's all I can go into right now.

Just fyi for anyone interested.

Thanks. From reading the webpage I think we can compare our frequencies with multiplies of the frequencies Rife used. I might have stumbled on a useful one but other frequencies might overlap too with a lot of them. Perhaps a little tuning with a condenser might be fruitful here.
The instrument Rife used was totally different I think Vassilatos says it is a tube working electrostatic because gas lamps did not work at all in all colours. Read Vassilatos 'lost science' on that.
But in all Vassilatos work he did not understand that Tesla did not just use high voltages or pulses to separate aether from electrons. This tuning by Dollard is just as effective and much simpler. Combined with high voltages like you guys allready have it must get even better But for cancer we must also tune to the right frequency it seems now.

[mikrovolt]

Regarding frequencies that are precursors to earthquakes.

Some think that earthworms and toads become irritated before earthquakes, Not liking this event they come to the surface. Toads in large numbers begin moving away.

By setting sensors on earth worm activity on an earth plot having a large cylindrical coil on top it might be possible to find such a frequency or a product of this mysterious precursor.

The visual effects seen with clouds brings me to speculate that the earth emits waves of some sort forming a belt, an emission event near epic centers.
What some have seen before earthquakes may be the light diffracted by this belt against the backdrop of a cloud.
Unlike a rainbow the light formation is localized, can be distinguished by the scratchy vertical lines or striations.

[upgradd]

Rife

That's a fascinating website about Rife's machine Aaron.

Does anyone else see a comb generator in all the spectrum plots?

After reading a good portion of what that site had to offer, I don't think it's about any one "special" frequency, more a discreet interval of amplitudes and evenly spaced harmonics. Theory of comb generators would do anyone looking into this subject a world of good, that and a solid understanding of time and frequency domain concepts.

Also, the sharp rise time shown for the time-domain signal is very interesting. As anecdotal evidence toward harm to the human body, I've dealt with high slew rate dV/dt signals and have gotten headaches and gray hairs! This on multiple occasions, and I'm not at that age which garners gray hair for free. Which, should let people realize that it's not "all good." Care and thoughtfulness is paramount if working with these type of experiments.

[Sputins]

Can't you space the turns out to get the height to diameter ratio back up?

I'm directly scaling down Tesla's Colorado Springs coil so that doesn't use any of the CRI calculations given by Eric. In this case I know what the scaled frequencies should be, but my measured secondary frequency is slightly higher because of the burdening or stray/parasitic components on Tesla's coil that isn't present in mine, so I added the air condenser to get the frequency back down to the proper scaled (design) value. The priority here is to maintain the same wavelengths, LC ratios, impedance etc between the coils as the full scale version in order for the scale model to work/do the same thing. Hopefully I get delivery of materials tomorrow and I can start with the extra coil tuning. I plan to test the secondary with Eric's extra coil design or a variation thereof at some point, since we already know that the extra coil frequency is low, but no one knows what the optimal relationships are in Eric's design so that's entirely experimental.

I suppose I could’ve spaced the turns out to get the diameter ratio back up, but I figured it was easier to unwind it (plus keeping my 66.2 meter wire for later, rather than cutting it) and also achieve a more accurate result to just re-wind it.

Okay that explains what you’re doing there exactly. You’re building a scale model of the CS coil. I suppose since you’re scaling down the size of the coil, the scale frequency goes up accordingly. As you say, it would be the LC ratios, coil shape & impedances that would be most important etc. I think (as you would already know) Tesla says that 30Kc or below worked best for telluric propagation, but that’s for a full size 50-something-foot coil. What is your generalised scaled down ratio?

My current rig design is loosely based on Eric’s but it’s all experimental for sure.

[dR-Green]

After measuring out the wire, (66.2 meters) I constructed the first version Extracoil following the ‘Tentative Extracoil’ calculation formula. I found that for my spiral coil the extra coil inductance was too large, and the frequency of it too low to resonate compared to that of the spiral coil (and adding any capacitance will bring it down even further). Unwinding it some then made the length to height ratio incorrect. - I noticed that this maybe why you recently added the variable air capacitor across the secondary coil on your rig, as to bring down the secondary frequency to match the Extracoil’ s frequency better?

Can't you space the turns out to get the height to diameter ratio back up?

I'm directly scaling down Tesla's Colorado Springs coil so that doesn't use any of the CRI calculations given by Eric. In this case I know what the scaled frequencies should be, but my measured secondary frequency is slightly higher because of the burdening or stray/parasitic components on Tesla's coil that isn't present in mine, so I added the air condenser to get the frequency back down to the proper scaled (design) value. The priority here is to maintain the same wavelengths, LC ratios, impedance etc between the coils as the full scale version in order for the scale model to work/do the same thing. Hopefully I get delivery of materials tomorrow and I can start with the extra coil tuning. I plan to test the secondary with Eric's extra coil design or a variation thereof at some point, since we already know that the extra coil frequency is low, but no one knows what the optimal relationships are in Eric's design so that's entirely experimental.

[Aaron]

Rife Machine

On The Rife Machine Report, A History of Rife's there is a book on Rife that tells the truth to what Rife had. Three real Rife Machine were found and were reverse engineered and documented. It is stated in the book the TRUTH to the method. However, it is used to promote equipment that is NOT applying the method in the book!

This is the book I'm taking about: The Rife Machine Report, A History of Rife's Instruments and Frequencies

I hope to be able to share more soon but that's all I can go into right now.

Just fyi for anyone interested.