Eric P. Dollard

[7imix]

I, too, have been quietly building, inspired by Eric. I have built a 2.5 foot diameter secondary coil, 20 turns (will adjust down to 17 to tune and compare) on a wooden frame. It's calculated with the equations given earlier, for 1 mhz.

For the primary I used the exact same wire as secondary, measured the distance between two clamps and then clamped folded 10 turns of wire back on itself. I then cut the bundle at both ends and joined them together to make one primary turn (if I measured carefully enough). Two turns of 10 wires should match the mass of the secondary.

Dave:

That is a beautiful MWO antenna you have etched there. I have been making plans to build a similar one for a while now, since I saw the USPA MWO presentation. However being the perfectionist that I am, I have been attempting to teach myself how to draw the rings in log periodic form. Have still not finished that project yet.

[David G Dawson]

Extra Coil Math

John,
Difficult getting people to understand that their Math is incorrect when it quite clearly doesn't match the original.
This is in reference to Eric's Math for the Extra Coil which doesn't match the true Tesla Extra from the CS Notes.
I have provided all of this data in previous Posts but it goes unattended.
The amount of Copper in the Extra is more than double that of the Secondary where only 17 turns were used.
I have proven this without doubt with my current Crystal Set.
Going now to produce a new Extra that has a larger or longer form and wind it with wire that is closer to the 'true' TMT Secondary/Extra Copper mass relationship.
The fact that the Extra is not a true scaled down version of the original in size is, I feel, not of importance but the LENGTH of wire is as it is nearly the same as the Secondary.
Eric asked us to find all of this detail in the CSNotes and when presented as recorded, nothing happens.
As a consequence I don't hear people jumping up and down with success stories and if they do receive a signal, it is from blanket overload from a powerful 50kW AM transmitter and not my measly 2 kW received via a ground current.
Will advise when I have the new Coil up and running.

Have been taking Eric's direction with focus on the work of Gerry Vassilatos and have uploaded an extract from his books at 'n6kph' which gives a good insight into his Telluric/Ground current experiments.
There are 10 volumes that make up the entire Vril Compendium but have only been able to find several extracts but these may be all we need to gain an insight into this phenomena which has been clearly supressed or dismantled.
It is clear to see that both Gerry and Eric worked well together during the Borderland Years.

Gerry's 'Lost Science' here:

http://www.imlauer.co.uk/OS/Documents/44412023-Gerry-Vassilatos-Lost-Science-Complete-Edition.pdf

An extract on Guillemin that may be of assistance to Eric and the Math people:

http://dspace.mit.edu/bitstream/handle/1721.1/51306/RLE_QPR_038_XVIII.pdf?sequence=1

Presenting this to you in the hope that Eric can redefine the Math for his Extra Coil.
Thanks.

Smokey

[jpolakow]

Eric,

@all,
Does anybody have a copy of "Symmetrical Components" by Wagner that can get this material to Eric?

Thanks,

Dave

Yep, I just got a copy. He can see it whenever he comes back
John

[Web000x]

Eric,

Here is a link to "Empire of the Air": Empire of the Air - America on DocuWatch - free streaming American history documentaries The sound doesn't quite seem to match the video, but this seems to be the only place to freely watch it on the internet.

@all,
Does anybody have a copy of "Symmetrical Components" by Wagner that can get this material to Eric?

Thanks,

Dave

[soundiceuk]

Here is my personal donation to Eric P. Dollard.

[dR-Green]

How do you find out the output impedance of an oscillator if it doesn't say it in the manual?

[Web000x]

Web000x
You must have used a gallon of etchant but the finished product looks nice and professional. Which chemical are you using for etching?

It is a 12"x12" board that I was able to etch with 1 quart of ferric chloride. It is not as professional as I had hoped. If you look closely, you can see the vertical seam on the left of where I had to join two transparencies with some clear tape. I would imagine that it will still work alright, but I will try something a bit different for making the second board.

[Nhopa]

Log periodic antenna

Web000x
You must have used a gallon of etchant but the finished product looks nice and professional. Which chemical are you using for etching?

[Web000x]

Hi fellow forum members:
Since our mentor moved back into the wilderness it got very quiet on the forum. The good thing is all the distractions are also gone. I myself will keep working on Eric's assignment and I hope you builder types will do the same. I think Eric left us with enough information that we can succeed. Keep in touch, don't let this forum go to oblivion.

Busy...




Just finished this less than an hour ago. Do what you will to validate E.P. Dollard.

Dave

[Nhopa]

It is awful quiet out there

Hi fellow forum members:
Since our mentor moved back into the wilderness it got very quiet on the forum. The good thing is all the distractions are also gone. I myself will keep working on Eric's assignment and I hope you builder types will do the same. I think Eric left us with enough information that we can succeed. Keep in touch, don't let this forum go to oblivion.

[t-rex]

George Gaboury, I am going to denounce you and your San Francisco Tesla Society if you do not release my material. I have been trying to get this material for 2 years. All you have to do is put it in an envelope and mail it. Just do it!

Roy Stolti, you drove me out of my own station and will not respond to any phone calls about acquiring the Landers notebooks. This is BS.

A message for George and Roy:

FU

Anybody interested in helping me get my materials released can call the following numbers:

Roy Stolti - Landers Notebooks - 760-577-5681

George Gaboury - 16 hours of E.P.D. lectures - 415-286-6576

[Web000x]

What's the address or email to contact him?

San Francisco Tesla Society

Email: [email protected]

Website: San Francisco Tesla Society Home Page

I hope you'll take a moment to remember Philo T. Farnsworth when you turn on your TV or look at your computer screen. He made it possible, and if you ever meet another 14 year old as bright as Philo was, you'll be doing the whole world a great favor if you tell him about Philo and encourage the lad in any way you can.



-George Gaboury
President, San Francisco Tesla Society

That quote is from the "Message From The President" link on the S.F.T.S. website. I am sure that some of you persuasive guys would love to remind George that Eric was adopted by the Farnsworth family for his accomplishments.

Dave

[jpolakow]

He doesn't get royalties from his books. You can find all of Eric's material online at no charge. Just take a look at Lamare's Dollard collection. If you feel that he deserves money, you can donate to his paypal account.

@All,
George Gaboury, San Fransisco Tesla Society operator, told me that his girlfriend has had an accident, and he has been her primary caregiver for the past few weeks. The 16 hours of Dollard footage has been put on hold until around August. Feel free to write the SFTS and let them know how interested you are in seeing Eric's work even if it is not edited since this is the primary hold-up.

Dave

What's the address or email to contact him?

[Web000x]

Does anyone know where to buy Eric's books so he gets paid the most?!

Thanks Thug

He doesn't get royalties from his books. You can find all of Eric's material online at no charge. Just take a look at Lamare's Dollard collection. If you feel that he deserves money, you can donate to his paypal account.

@All,
George Gaboury, San Fransisco Tesla Society operator, told me that his girlfriend has had an accident, and he has been her primary caregiver for the past few weeks. The 16 hours of Dollard footage has been put on hold until around August. Feel free to write the SFTS and let them know how interested you are in seeing Eric's work even if it is not edited since this is the primary hold-up.

Dave

[thugugly]

books

Does anyone know where to buy Eric's books so he gets paid the most?!

Thanks Thug