This forum is preserved as a permanent archive. The community continues at eMedia Press.

Announcement

Collapse
No announcement yet.

Growing Crystals, Piezoelectric Energy Harvesting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • superman9976
    replied
    Originally posted by Slovenia View Post
    Hi Chris,

    I've been archiving all of Powerme's work to pdf files and they are posted on Scribd. I'm getting ready to start replication of his work soon. My supplies are coming. I haven't tried to work with Mike's stuff yet. I just keep his pdf file up to date. It's way over my head. There are about 15 of us working on the Powerme stuff. Check out the thread:



    Best Regards,
    Slovenia
    I can't believe it! I put 300ml of ammonia into a mason jar and then added 30ml of zinc oxide. End result 100ml of zinc crystals looks like sand! Three times the amount of what I started with. I just finished making it Wednesday night. If you have any questions on how I did it I will share. Powerme gave instructions which actually are guidelines. You dont need to stick to exactly what he said. These are just rough numbers. I used a $2 plastic paint mixer in a electric drill instead of 130 dollar magnetic stirrer. Oh and I bought some walgreens ammonia for 1.99 and froze it to separate the ammonia out of it. Now I just need to test out the crystals with the transducers that my brother bought from China.
    Chris

    Leave a comment:


  • Slovenia
    replied
    Powerme

    Hi Chris,

    I've been archiving all of Powerme's work to pdf files and they are posted on Scribd. I'm getting ready to start replication of his work soon. My supplies are coming. I haven't tried to work with Mike's stuff yet. I just keep his pdf file up to date. It's way over my head. There are about 15 of us working on the Powerme stuff. Check out the thread:



    Best Regards,
    Slovenia


    Originally posted by superman9976 View Post
    Thanks Solvenia!
    Any luck on Mike's thread or powerme thread yet with you?
    Chris

    Leave a comment:


  • mikrovolt
    replied
    All I know about his privileges unfortunately continued insults
    his departure was after being warned on another thread. He was strong on
    everyone pay attention to this thread.

    I don't want to judge powerme's intent on this thread.
    This thread does have some content, useful methods, before he left I had noted this document:

    Best Way to Use Heat From HHO to Generate Electricity

    I can point to an article may help anyone to review similar work.

    Huifang Xu assistant professor madison Wisconson.

    Crystal Hydrogen Vibes

    crystals in water produce hydrogen when introduced to sonic waves

    Zinc oxide in water can make hydrogen fuel | 18 March 2010 | www.commodityonline.com

    Leave a comment:


  • superman9976
    replied
    Banned?

    Oh I didnt know he was banned. I know he was a bit crabby in some of his posts. Well thanks for replying so fast to let me know! I tried what he had posted on another thread but it didnt work since there wasnt enough info and details so here on this thread I see way more details that were left out on the other thread.

    Thanks Solvenia!
    Any luck on Mike's thread or powerme thread yet with you?
    Chris

    Leave a comment:


  • superman9976
    replied
    question about ammonia

    Originally posted by powerme View Post
    Crystals is the Key to Harvesting energy from the enviroment.

    All semiconducter electronics components are based on different types of crystals, different sizes, different geometries, each quality can be optimized to tune into different frequency.

    With the new development in nano crystals, there's a handful of people conducting nano piezoelectric research at home, I hope that We can also take advantage of this development and use this new technology as a way of obtaining Energy Freedom.

    There are many applications for these piezoelectric crystals, the technology is over 100 years old but not much was done until recently.

    I hope that we some of you will come together and start developing devices such as Nokia Self Charging Phone Battery, Piezo Cells for Self Charging small batteries AAA-C size etc.

    Current Project.Piezoelectric production of Atomize water with HHO for ICE water fuel.

    I have been trying to come up with a simple low temperature method to growing micro size single crystals at low temperature that is simple enough for anyone to perform. the mainstream ZnO single cystals are fused at high temperature and vapor deposited requiring complicated setup and technical expertise.

    This is a simplified version for home use.
    Please use all precaution, I am not responsible for anything that may occur.

    Materials:
    1lb. Zinc powder nano.
    1 gallon ammonia cleaning (ammonium hydroxide)

    Hot plate with Magnetic Stirrer
    teflon coated stir bar.
    1 liter boiling flask with rubber stopper.
    reflux condenser if available.
    water bath.
    thermometer


    Dissolve 30 grams of ZnO in each 300 ml of 30% ammonium chloride/ hydroxide. This is best done by filling 300 ml of 30% amonnium hydroxide into the flask and place on stirrer with teflon bar. Turn on the heat to medium, Turn on Stirrer to low speed, #3. Slowly add zinc oxide to solution. When all ZnO is dispensed, cap flask and turn up stirrer to maximum, bring the heat up to 60 deg C and let it mix for 30 minutes.



    Place flask in the Freezer and freeze solution to -0 degrees C.
    When you reach this temperature, allow an additional 1 hr.

    Before reflux, bath flask in a bowl of room temperature water for 5 minutes to avoid thermal shock and breakage of flask.

    Set up water bath, large boiling glass bowl with water. Put your flask of cold solution in the water bath and set up reflux condenser with water tube, if you don't have one then just cap your flask tightly and turn on heat. Allow solution to heat up to 60 degrees C, maintain 60 deg C temperature for 2 hours, crystals will grow during this time.

    Let solution cool to room temperature, Filter solution and recover crystals
    .

    the crystals are self seeding. these crystals are not the typical large crystals that most people grow at home. the single crystals are very small, nano size, at this size, they are able to pick up all induced waves and convert waves into electrolysis of water.

    There is already a thread on HHO, we can discuss HHO piezoelectric application there,

    and discuss Growing of Crystals here, there are many different types of crystals, and many different method of utilizing them.
    I see that you say use 30% ammonia hydroxide cleaning solution but it seems most of the cleaning solutions arent that concentrated. I have an ammonia cleaning solution from walgreens it says compare to parsons ammonia. Is this good enough to use for this project? Thanks powerme for all your knowledge!

    Chris

    Leave a comment:


  • powerme
    replied
    Originally posted by everyidea View Post
    Here is a 1925 study of radio detector crystals. The last page is very interesting regarding the crystal structure of Ag doped PbS, being a wave form. It's interesting that pure PbS crystals did not perform well.



    Anyone have the process of making doped PbS crystals at home?

    rw
    not true, what size was the PbS lattice?.

    yes, you can dope at home with electrodepositions with simple dc power source. calculate your molar weight and time the deposition.

    Leave a comment:


  • powerme
    replied
    Originally posted by Cherryman View Post
    What would be the preferred Crystal size and count?

    Small crystals? 1 to 5 mm? Larger ? centimetres?

    Do we suspend one crystal in the water? Or a few?

    Are they aloud to touch each other or the container? Or do they have to free-float individually?

    Does the Crystal dissolve over time?

    Does water based grown crystals melt in the water?

    Questions.. Questions..


    I will start growing this weekend.
    say that our ZnO crystals was a wheel and the ultrasonic waves was the stick pushing it into momentum.

    what is the length of the stick (waves)?

    what size should the wheel be (ZnO) to pick up the Kinetic energy?.

    Leave a comment:


  • everyidea
    replied
    Here is a 1925 study of radio detector crystals. The last page is very interesting regarding the crystal structure of Ag doped PbS, being a wave form. It's interesting that pure PbS crystals did not perform well.



    Anyone have the process of making doped PbS crystals at home?

    rw
    Last edited by everyidea; 02-18-2011, 05:33 PM.

    Leave a comment:


  • Cherryman
    replied
    Crystal size and number

    What would be the preferred Crystal size and count?

    Small crystals? 1 to 5 mm? Larger ? centimetres?

    Do we suspend one crystal in the water? Or a few?

    Are they aloud to touch each other or the container? Or do they have to free-float individually?

    Does the Crystal dissolve over time?

    Does water based grown crystals melt in the water?

    Questions.. Questions..


    I will start growing this weekend.

    Leave a comment:


  • powerme
    replied
    I have been looking into the history of Lead in photovoltaic effect and it goes far back to 1904, that is over 100 years of the known photovoltaic effect of PbS in infra-red.

    There was a lot of secret work being done on this material too before and after WW2, can anyone shed some light on this?.

    There's also rumors of Tesla's activities in Galena that he called the Electric Rock.

    EPITAXIAL LEAD SULFIDE PHOTOVOLTAIC CELLS was patented in 1970.

    Leave a comment:


  • powerme
    replied
    thanks guys,
    I did read up on Moray, and he did use Lead Sulfide with vacuum tubes of his own design but I have no idea of his configuration.

    I have discovered that All conductors in crystalline form has amplified dielectric constant, this is very easy to do.

    to be able to harvest a particular frequency, you just need to have your crystals sized proportional to the length of the wave. my cells is a broad array of crystal lattice that does harvest a broad spectrum.

    you guys should be aware of the properties of element at nano scale, All Lies called Laws of Science NEED NOT APPLY as they are useless.

    Leave a comment:


  • ewizard
    replied
    Regarding lead and radiant energy http://www.nuenergy.org/pdf/alloy.pdf this may be of interest (from Bruce Perreault and his Moray research). I suspect powerme already knows about this.

    While I had a lot of chemistry including lab time that was over 40 years ago so I may not be the best one for making instructions. I will try to grow crystals as time allows (still have another very big and important project I'm finishing as fast as physically possible) and if successful post details.

    Regarding mercury I don't know how much you need but they still make mercury tilt switches which have mercury in them usually enclosed in glass. Tilt switches can be found fairly cheap (couple dollars each) online many places. Of course use protective gear when getting them apart.

    Leave a comment:


  • Slovenia
    replied
    Thanks Powerme!!

    Powerme,

    Thanks for sharing your knowledge with us!! It's great stuff.

    Best Regards,
    Slovenia

    Leave a comment:


  • powerme
    replied
    All of my disclosures are non proprietory, it is Free for all to replicate.

    The only way to re-gain the Freedom of man is to cleanse ourselves of selfishness and the sickness called greed. It is time for you to realize your true potential. You are capable of so mucch more.

    Our projects will be interactive where you will exercise and unleash your power of creativity.

    Leave a comment:


  • powerme
    replied
    our next project will be Lead Sulfide/ Oxide crystalline cells for harvesting of Radiant Energy, 24 hours.

    it is a good idea to stock up on lead now, as soon as we get the ZnO water fuel successfully replicated, we will start on this project.

    it will be best not to overwhelm you guys with so many information, The Power To Be is yours, and it starts by taking action.

    Leave a comment:

Working...
X