Lockridge Device - Peter Lindemann

[twoody01]

Delco-Remy starter/generator repair manual

I found a repair manual that mite be of help to you. Not sure if this is the one you are rebuilding.

http://www.ccmanuals.info/pdf/Delco-Remy%20SG%20Repair.pdf

[FRC]

Thanks twoody01

This is great. Any additional information like this should be very helpful to
everyone working on this.

George

[Armagdn03]

@Armagdn03
I just wanted to say I was reading A post you made on another group about the Peg motor and it is the best Analysis I have ever seen on a motor of that type. Not that I'm into that but I just wanted to complement you on your work. When you right no one can defeat you epically Ted.
But I guess they never tried to make it. If I had a way you could use my machines but your far away. The work is excellent and I mean that.
John B

Thank you very much! I really appreciate the offer, as I have no way of making spinning things well. I have built linear proof of concepts, but none rotational that worked well (imbalance issues). I now live in Golden Colorado, but go back Utah direction every once in a while. I would love to talk with you, we have missed the opportunity several times now, but all good things to those with patience.

I hoped more people would pick up on that design, but nobody really seemed interested past looking it over and giving it a nod.

[FRC]

Armagdn03

When John posted that I tried to find information about the PEG motor. I could
not find anything. Do you have any links to this info?

George

[Armagdn03]

When John posted that I tried to find information about the PEG motor. I could
not find anything. Do you have any links to this info?

George

It was posted on a private section in another forum. Let me find the information and I will re-post here. I will try and reproduce some of the responses that are relevant too, hope those who contributed do not mind.

I started a thread here

http://www.energeticforum.com/renewa...peg-motor.html

[FRC]

Thanks Armagdn03

Thanks Armagdn03 for starting the new thread. I skimmed through it but had trouble understanding some of it. The concept does sound very good and those
interested in the Lockridge device should also be interested in such an efficient
motor as the PEG motor appears to be.

George

[Armagdn03]

To understand it, you must ask yourself....If I were to turn a motor winding into a tank circuit, what would hinder its resonant rise? Know your variables, manage them.

[Hiwater]

Armature Rewind

Here is my first entry into the winding competition

https://skydrive.live.com/redir.aspx...P_Obl1yX4P7tJs

Mbrownn, have you tried out your armature yet. I looked at the pictures. Looks like a nice rewind.

[mbrownn]

Mbrownn, have you tried out your armature yet. I looked at the pictures. Looks like a nice rewind.

Not yet, my problem is the brushes. I could do it with razor blades as I have done in the past but with the expected current it is likely to "weld" to the commutator and ruin it.

[FRC]

Thanks Mike

Not yet, my problem is the brushes. I could do it with razor blades as I have done in the past but with the expected current it is likely to "weld" to the commutator and ruin it.

Thanks Mike for your continued dedication to this thread. You have kept interest in it alive and brought new life to it. By the different aspects that
you have brought to everyone's attention, two new threads have now
been started the "three battery generating" thread and now the "peg motor"
thread. These two ideas were brought to our attention here and if it were
not for you keeping things going here, many of us would not have become aware of these very interesting FE systems. Keep up the good work !

George

[mbrownn]

for the kind words,

I am totally convinced that this is how the original device worked, it is different from what we have seen in that I have modified the armature but if the original had the wave wound armature there would be no need for modification although I believe having a modified rotor, like I have done, will work a little better. The main difference is I have blank segments between the coils.

Other than building it, what needs to be done? optimize the geometry and optimize the windings. I think I am that close. Once I know this for sure I will start to release how to do it with other motors. It is so simple that I find it hard to believe that it took me so long to get there but you would not understand that it could work without understanding what all the parts do and how they interact. The device is simple but the interactions are complex.

I think I could wire an SG to do it so when the time comes I will start a thread on that as this is a simple pulse motor that most of us understand but I am getting ahead of myself. I have to prove it first.

The peg motor works in a totally different way and produces a different energy, hence Johns interest. I will watch with interest but wont participate much until I have this thing sorted.

The three battery system could be used to improve a Lockridge COP, hence my interest but you would need to match the motor to the batteries and we don't know how to produce the bad battery yet.

Get ready to replicate guys, especially if I can do it with a universal motor.

[joeqsmith]

[IMG][/IMG]

[joeqsmith]

A few videos of the dynamometer. It now uses ceramic bearings and a brushless absorber. When used with the balance, it yeilds some very impressive results measuring motors well into the few Watt range.

I have ran tests as high as 25,000 RPM at up to 80 Watts with it.

minidyno.wmv - YouTube

minidyno cal - YouTube

Mini-Dynamometer - YouTube

[wantomake]

My first post ever . I've been following this thread since the beginning and have tested several different motor/gens. Is there any more interest in this? I've learned so much from this, would be great to finish this device.
Thanks,
wantomake

[mbrownn]

My first post ever . I've been following this thread since the beginning and have tested several different motor/gens. Is there any more interest in this? I've learned so much from this, would be great to finish this device.
Thanks,
wantomake

Yes, there is at least one group working on this which I am a part of. We are running tests on a motor that will not be self running but are learning what we need to do to make a self runner. After we have gained enough knowledge to understand, we will be posting here but there is little point in posting something that is not going to work as it will lead people up the wrong path. If anything is found that is new or additional to what I have already posted I will update you.