Donald Smith Devices too good to be true

[dunfasto]

hehe yes i have read that as well, but i see PARALLEL caps on Dons board, making it 2000v at 32-40 uF. (Amazing1.com has 2kv 10uF's)

Another thing i have "read" is a steady 2-3 amps, which "could" make this up to 4 to 6 kilowatts if you can keep the caps charged while drawing from them.

i am still experimenting with the speed of the charging, and the effect of the resonance while connected.

Caps charging ....
(Still in progress)

2: working model by Kurt, very fast charging and MASSIVE capacitor Discharge display - YouTube

experimental stepdown and amp reading....

1: working model by Kurt, with amp measurement - YouTube

Hi mr. clean,

I just joined this thread today and found while reading the last few pages. saw your great Don smith videos. amazing work you have done. very impressive videos. I always had this feeling that people try to not realize the potential of DS device. thanks to you for making the people understand that it works as Don said it will.

great work. thanks for posting.

thanks and regards.

dunfasto

[mr.clean]

Hi mr. clean,

I just joined this thread today and found while reading the last few pages. saw your great Don smith videos. amazing work you have done. very impressive videos. I always had this feeling that people try to not realize the potential of DS device. thanks to you for making the people understand that it works as Don said it will.

great work. thanks for posting.

thanks and regards.

dunfasto

Thanks buddy, well its not done yet, but yes i consider it progress

[mr.clean]

Thanks for the feedback.
I thought Z had warned of caduceus coils at certain frequencies.
What was the wire size and length?
Keep up the good work!

L2 was the deciding factor, it is 80turns, 12gauge, 4" dia, 230uH, high self-capacitance.

L1 is 1/4length of L2, 16uH, 8 gauge. With .1uF cap

With ferrite added both inductances were raised to 47uH andth 645uH, which worked well with the 70khz driver freq.

[Farmhand]

Originally Posted by Jacqui
Hi Guruji , I don't feel like doing any arithmetic but I wonder if people here subscribe to the theories and information of Thomas Bearden as related to accessing energy from these Smith / Tesla machines ?

Tom says that one must not kill the dipole and he seems to be rather insistent on that point . He offers a method to stop the dipole destruction from occurring , that was to completely disconnect from the source before you connect to the load .

His method is to charge a capacitor then disconnect it from the source ; then connect the capacitor to the load through a switching method called iteration or shuttling the stored charge of the capacitor to the load after having completely disconnected from the source . This also has the advantage of step charging the capacitor when the charge cycle is in action and of course the higher the impulse rate the more dark energy is obtained ; this is beneficial .

He says that the capacitor is the device used to convert the ether / dark energy from it's initial form to the usable form of familiar energy we use in our every day electrical systems . This seems to be a very important part of the overall machine .

Charge the capacitor first with steep rising impulses , the faster you do it the quicker you can shuttle that capacitor converted charge to a usable load . It's the right knak in get the switching timing right .
I feel that there is an enormous amount of effort by people on the " front end" when it's the least of your problems ; just about any steep rising impulse and the steeper and bigger the better , will do the trick .

Jacqui .

Hi jacqui,

If a capacitor is charged from the source then the cap is the load
when charging, then when the cap is discharged it is the source and
the intended load is the load.

So it's easy to see that it is impossible to charge the capacitor without it
being connected as a load to the source just as it is impossible to
discharge the capacitor as a source without it being connected to the
load.

It's another case of minced words. It's impossible to use a dipole like a
battery to provide power to a circuit without using the dipole, that does not
even make any sense. If you use it, you use it.

The confusion comes with the word "destroy". I don't destroy my batteries
when I use them, they are dipoles. I deplete them.

How can the capacitor be charged from the source dipole without depleting it ?
And how can the capacitor be discharged as a source with depleting the
capacitor, it's a dipole as well. The very function of discharging the capacitor
is to deplete it so that the load is powered.

Cheers

[dunfasto]

Thanks buddy, well its not done yet, but yes i consider it progress

Hi mr. clean,

You call it progress i call it Breakthrough.

what you have done is the reply to all people who blamed Don Smith for

being fake and did not believe in free energy from the ambient.

am glad you prove them wrong.

I admire your attitude in believing in Don Smith.

best wishes for you in your final device.

Thanks and regards.

dunfasto

[mr.clean]

hi mr.clean
what circuit u use and components

Ill post the schematic when i can, but its identical connections except for primary circuit, parallel gap, and series cap and caduceus coil

Parallel cap and series spark to coil works well also, havent decided yet which i like most

[mr.clean]

hi mr.clean
what circuit u use and components

...and i managed to get 200 turns of stranded 12 gauge to wrap the metglass amcc320 powerliteC-core, and then just a few turns of 8gauge for output wire.

BUT i found that i needed more turns on the primary of the stepdown trafo, voltage was still too high on the output with just one turn, but great for show, need to add turns to primary

[Seeker2011]

L2 was the deciding factor, it is 80turns, 12gauge, 4" dia, 230uH, high self-capacitance.

L1 is 1/4length of L2, 16uH, 8 gauge. With .1uF cap

With ferrite added both inductances were raised to 47uH andth 645uH, which worked well with the 70khz driver freq.

Thanks again and just to be safe, when you go out tonight, check to see if you're glowing...

[mr.clean]

Thanks again and just to be safe, when you go out tonight, check to see if you're glowing...

actually once after a late nite of experiments, shocks and the usual near death incidents( ) ...

... i went to wash my hands before bed and got a fist sized BLUE FLASH from the water out of the tap when my hands touched it

i thought it was pretty sweet lol

and isnt there actually a benefit to the exposure of these devices, Neg ions, etc??

anyway all i know is i feel good and i dont notice any ozone now that the coils are spaced out enough and not ionizing thru the air to eachother and sabotaging itself

and the caduceus/ tensor coil, to me is a clear advantage over the regular winding, L2s are cw cw from factory

I just cant wait to see what Drak, BlueSerge, JoeFR, Farmhand, T1000, Dragon, Xee2 ... and who could forget WOOPY ... come out with,they know their stuff

[atta]

congrats

actually once after a late nite of experiments, shocks and the usual near death incidents( ) ...

... i went to wash my hands before bed and got a fist sized BLUE FLASH from the water out of the tap when my hands touched it

i thought it was pretty sweet lol

and isnt there actually a benefit to the exposure of these devices, Neg ions, etc??

anyway all i know is i feel good and i dont notice any ozone now that the coils are spaced out enough and not ionizing thru the air to eachother and sabotaging itself

and the caduceus/ tensor coil, to me is a clear advantage over the regular winding

I just cant wait to see what Drak, BlueSerge, JoeFR, Farmhand, T1000, Dragon, ... and who could forget WOOPY ... come out with,they know their stuff

its really great!
Congrats and thx for sharing

[Jacqui]

Hi jacqui,

If a capacitor is charged from the source then the cap is the load
when charging, then when the cap is discharged it is the source and
the intended load is the load.

So it's easy to see that it is impossible to charge the capacitor without it
being connected as a load to the source just as it is impossible to
discharge the capacitor as a source without it being connected to the
load.

It's another case of minced words. It's impossible to use a dipole like a
battery to provide power to a circuit without using the dipole, that does not
even make any sense. If you use it, you use it.

The confusion comes with the word "destroy". I don't destroy my batteries
when I use them, they are dipoles. I deplete them.

How can the capacitor be charged from the source dipole without depleting it ?
And how can the capacitor be discharged as a source with depleting the
capacitor, it's a dipole as well. The very function of discharging the capacitor
is to deplete it so that the load is powered.

Cheers

Hi Farmhand ,
well I'm no expert on these matters but others like Bearden seem to claim to be so . I just look at " everyone " and see who comes up with the goods and in some cases it's through experiment that I have performed on some of their work , in other cases it's through indirect validation by trusted persons . If you had studied Bearden , Bedini , Vassilatos , you would have a better understanding of this subject .

Of course it all ties back to Tesla ; most as far as I can see at the moment . If I was to suggest why the capacitor does not look like a load to the source is that there is no actual electron flow through the devise As the charge is nothing more than a stressing of the dielectric . All the action needs to be done before the electrons flow , and that's part of the understanding in this technology . A good place to gain knowledge and a foundation on this technology is to participate in the Monopole 1 and Monopole 2 programs run by Rick Friedrick .

To make progress in this area you need to have an open mind and not everyone is going to achieve that , for some they will never have one that's why it's hard to find the answers ; otherwise everyone would have these machines and they don't .

Jacqui .

[nutgone]

its really great!
Congrats and thx for sharing

I'll second that

It's certainly given me the incentive I needed to carry on with my replication. I just need to get my hands on some HV capacitors, & believe it or not, it's the weather that's holding me back right now!

I've been spending my down-time studying various schematics, getting some of these PDF files read & getting to grips with my new, very old, Trio dual trace oscilloscope (it was a freebee, so I can't complain, it works. & I've even downloaded a manual for it )

The spirits of the Free Energy world, & this thread in particular, seem to be very high at the moment. Many people seem to be having successes, some big & some small, but they are all successes, which is great news & very inspiring.

[woopy]

Hi all

Hi Mr clean

bravo Kurt for your great work and very inspiring motivation of all the contributors

a video to explain my progress " what else "!!


good luck at all

laurent

Maxi energy pumping with mini kacher 1 .wmv - YouTube

[GSM]

Hi Farmhand ,
well I'm no expert on these matters but others like Bearden seem to claim to be so.
Jacqui .

Farmhand is correct. Bearden is not in this regard.
Electrical potential is either an excess or depletion of electrons at some point within a circuit, as with a battery or a charged capacitor.
You cannot charge a capacitor or load without transfering part or all of that excess or depletion, and this transfer of charge = current flow, as indicated by a meter.
This is as fundamental a principle of physics, as is electron activity relating to charge flow in any circuit containing a capacitor, neither aspect being anything subject to 'open mind' variation.
Yes the dielectric in a capacitor becomes stressed, as indeed does air in the air gap of spaced capacitor plates, and yes electrons do not flow through a non-ionised air gap or dielectric, but there is still charge motion through any circuitry related to voltage development or depletion between those plates.

[mr.clean]

Hi all

Hi Mr clean

bravo Kurt for your great work and very inspiring motivation of all the contributors

a video to explain my progress " what else "!!


good luck at all

laurent

Maxi energy pumping with mini kacher 1 .wmv - YouTube

THIS IS AMAZING WOOPY, GREAT JOB, AND GREAT CIRCUIT DRAGON/LENZ

THATS IT, I GOTTA MAKE THIS ONE

it seems the Shinobi Winds have brought the Kacher to us, all in the universal perfection