Energetic Forum  
Facebook Twitter Google+ Pinterest LinkedIn Delicious Digg Reddit WordPress StumbleUpon Tumblr Translate Addthis Aaron Murakami YouTube ONLY 13% OF SEATS AVAILABLE!!!*** 2017 ENERGY CONFERENCE ***


* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX


Go Back   Energetic Forum > >
   

Renewable Energy Discussion on various alternative energy, renewable energy, & free energy technologies. Also any discussion about the environment, global warming, and other related topics are welcome here.

Bedini RPX Sideband Generator
Reply
 
Thread Tools
  #61  
Old 11-28-2011, 03:11 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
:-)

Quote:
Originally Posted by LetsReplicate View Post
Yes, thank you. The frequencies are going to be VERY helpful in getting this working, one of my first bottles was not far off that. I'll order the remaining parts today and hopefully have this working by the end of the week.

The scams are that they never show the complete circuit. For example the cell phone charger (Tesla Secret Generator) misses any mention of the ground or a proper antenna preventing it from being useful.

I was running the circuit as an RF receiving charge pump by using a bifilar sensing pancake coil to cause suction on Earth. The inside of the first coil went to the antenna, outside to the circuit. The earth ground connected from outside to inside on the second coil which is about the same as what we're doing here minus the radiation. I'm wondering if the back-end of your circuit will work as well on that ground pump: I can't see any reason it wouldn't.

Those are nice pictures, did you use a CAD program? I'm using DraftSight these days because AutoCAD is so expensive.

SmartDraw was giving me problems so I used MS Paint to generate the entire instructional :-) the ion pump serves a second purpose... Murray put his antenna 30' above the ground and then was 50' from there... That's 80' .. The initial 30' was just to cause a bias antenna side (which is what the ion tube achieves without the 30' ground side... Later Murray also included an ion tube)... Technically the circuit can work with a single diode antenna side... As long as the frequency of the antenna is correct... But under rectification... We'd only receive a halfwave in that case, thus the use of a full bridge in our circuit :-) (plus straight antennas of MHz range would be quite long)

You'll notice when you hit a right or really close frequency due to the fact if you use low voltage (under 1KV+) components.. You'll see an arc and suddenly the circuit will stop working (you blew it) :-)..although bad.. Is good because you almost have it!

Have noticed glass rupturing off the germaniums a few times... And the circuit still functions.. (diode was still in contact minus the casing)
Groundside capacitors have ruptured a few times.. (have resorted to using higher capacity voltage ratings (Low loss).

Trying to make a replica with all homemade components :-) so far so good.. Tuning homemade capacitors is a pain!
__________________
 
Reply With Quote

Download SOLAR SECRETS by Peter Lindemann
Free - Get it now: Solar Secrets

  #62  
Old 11-28-2011, 11:55 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Full Day

Full day and no responses.. I pray you're constructing and havn't electrocuted yourselves :-/
__________________
 
Reply With Quote
  #63  
Old 11-29-2011, 07:07 AM
LetsReplicate LetsReplicate is offline
Senior Member
 
Join Date: Nov 2011
Location: Canada
Posts: 120
Quote:
Originally Posted by mcombatti View Post
Full day and no responses.. I pray you're constructing and havn't electrocuted yourselves :-/
I'm working on it still. It's been a long time since I've designed a whip antenna and in none of those was it ever the plan to maximize the number of turns on the choke (normally it's the opposite). I've even pulled out my old college telecommunications textbooks on the subject but they are not even nice enough to give a formula for coil self-resonance... Which means I'm still going to have to guess on spacing for the parasitic capacitance until I find a value that works on my diameter of tube. I'm close I think.
__________________
 
Reply With Quote
  #64  
Old 11-29-2011, 10:10 AM
soundiceuk's Avatar
soundiceuk soundiceuk is offline
Silver Member
 
Join Date: Oct 2011
Posts: 969
I think its amazing and should tie in very well with the lighting circuit I'm working on. I'm guessing it can be regulated quite easily down to 12v?
__________________
 
Reply With Quote
  #65  
Old 11-29-2011, 04:05 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Coil Tuning

Quote:
Originally Posted by LetsReplicate View Post
I'm working on it still. It's been a long time since I've designed a whip antenna and in none of those was it ever the plan to maximize the number of turns on the choke (normally it's the opposite). I've even pulled out my old college telecommunications textbooks on the subject but they are not even nice enough to give a formula for coil self-resonance... Which means I'm still going to have to guess on spacing for the parasitic capacitance until I find a value that works on my diameter of tube. I'm close I think.
Perhaps this may help?
Inductor Designer / Calculator

:-)

When the americium is excited it will help "funnel" energy through the choke with the Leyden setup.. (I used fine wire)... If u have magnetometer you'll notice the field is like that of an upside down cone... Coming to a point at the bottom of the ion tube. And the choke unlike a regular choke doesn't use a ferrite ring or core (would ruin the effect).. All extra "static" capacitance is regulated by the surrounding "shield" (plastic or glass). If you use a straight antenna it's 147.3 feet of coaxial for 5.4 MHz... A combination of coil and whip will work as long as the inductance is equivalent :-) for the antenna.
__________________
 
Reply With Quote
  #66  
Old 11-29-2011, 04:20 PM
Seth0103 Seth0103 is offline
Junior Member
 
Join Date: Nov 2011
Posts: 5
You are a Genius!

For mcombatti

Im new to forums and hope I'm posting in the right place. I've tried all sorts of devices from this website and they all fail. Yesterday I finished constructing your radiant circuit and you are master of the electron! I believe my antenna is tuned but I am only getting 22KV at 1.4amps. Either way it's impressive! How do I get a full 50-100 KV like the schematic says? How do you shut the circuit off or prevent the outputs from arcing?

Thank you for your hard work!
__________________
 
Reply With Quote
  #67  
Old 11-29-2011, 05:07 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Circuit

Quote:
Originally Posted by Seth0103 View Post
For mcombatti

Im new to forums and hope I'm posting in the right place. I've tried all sorts of devices from this website and they all fail. Yesterday I finished constructing your radiant circuit and you are master of the electron! I believe my antenna is tuned but I am only getting 22KV at 1.4amps. Either way it's impressive! How do I get a full 50-100 KV like the schematic says? How do you shut the circuit off or prevent the outputs from arcing?

Thank you for your hard work!
Your frequency may be just over or under the 'peak' frequency. If you disconnect the antenna your circuit will dwindle to a halt :-).... What is the rating for your transformer? Perhaps you've lowered the voltage while increasing the current?... (which would make the voltage appear lower) technically the circuit isn't meant to "shut off"... It's a solid state power generator :-) can you post some pics or supply info for your construction.. For others? Arcing can be controlled by adding a load to the output terminals :-) or separate the leads beyond the breakdown point (sparking occurs).

You're welcome and continue building. As more people construct the circuit, I urge them to build them for others (for the cost of parts alone.. Non profit).. After enough hold the technology in their hands... It will become undeniable. I hold all intellectual rights to the circuit and would rather it be in peoples hands than locked away somewhere for a few bucks in my pocket :-)
__________________
 
Reply With Quote
  #68  
Old 11-29-2011, 05:34 PM
ewizard's Avatar
ewizard ewizard is offline
Gold Member
 
Join Date: Jan 2010
Location: Outside the Matrix
Posts: 1,092
Wow! Great work guys. Did I get it correct that Seth0103 is getting 22000 volts at 1.4 Amps ? !!! Are we really talking over 30000 Watts ? Or did he mean milliamps? I'm not seeing a lot of others in on this topic and wonder how many are aware of the successes here. There are a lot of hot topics right now with several other devices drawing a lot of attention due to some success. But I really like the essence of this idea and I think others will too once they have awareness of it. Note to self: get off butt and start building...
__________________
There is no important work, there are only a series of moments to demonstrate your mastery and impeccability. Quote from Almine

Last edited by ewizard; 11-29-2011 at 05:46 PM.
Reply With Quote
  #69  
Old 11-29-2011, 05:38 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Antenna design

The closest way I can show how the ion tube increases power output is with the following:
Maurice Hately, Fathi Kabbary, X-Field Antenna,US Patent 5,155,495

The method is used in thesta-distatica with the horseshoe magnets, antenna keys, and large Leyden-style "capacitor shields." My version is all 3 in a single unit. Most influence machines generate high FREQUENCY and high VOLTAGE... under steady semi-slow rotation (50-60 RPM).. (no need for tall antenna here :-)...and proximity to energy source removes need for 'tuned' antenna :-))...

By the way if you add HF or HV to the ground wire and fill the ion tube with quartz sand or resin (resin has to harden under HV or HF) and cap the tube without disturbing the "aligned" quartz.. Americium is not needed. (alternative for solar panel question.. And used in TD)
__________________
 
Reply With Quote
  #70  
Old 11-29-2011, 05:41 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Location of thread

Quote:
Originally Posted by ewizard View Post
Wow! Great work guys. Did I get it correct that Seth0103 is getting 22000 volts at 1.4 Amps ? !!! Are we really talking over 30000 Watts ? I'm not seeing a lot of others in on this topic and wonder how many are aware of the successes here. There are a lot of hot topics right now with several other devices drawing a lot of attention due to some success. But I really like the essence of this idea and I think others will too once they have awareness of it. Note to self: get off butt and start building...

I was wondering how people find this thread without a search.. It's really burried in the forums... As long as some know of it.. It's better than none :-) word travels quick with each new success though :-)
__________________
 
Reply With Quote
  #71  
Old 11-29-2011, 05:44 PM
LetsReplicate LetsReplicate is offline
Senior Member
 
Join Date: Nov 2011
Location: Canada
Posts: 120
Quote:
Originally Posted by mcombatti View Post
Perhaps this may help?
Inductor Designer / Calculator

:-)

When the americium is excited it will help "funnel" energy through the choke with the Leyden setup.. (I used fine wire)... If u have magnetometer you'll notice the field is like that of an upside down cone... Coming to a point at the bottom of the ion tube. And the choke unlike a regular choke doesn't use a ferrite ring or core (would ruin the effect).. All extra "static" capacitance is regulated by the surrounding "shield" (plastic or glass). If you use a straight antenna it's 147.3 feet of coaxial for 5.4 MHz... A combination of coil and whip will work as long as the inductance is equivalent :-) for the antenna.
No, that doesn't help because it does not predict parasitic capacitance (which is what gives a coil it's resonant frequency). The only way to determine parasitic capacitance is with an antenna analyzer or by measuring phase angle at the required frequency and calculating reactance from it.

The bottle coil is the loading coil for a 1/4 wave multiple (45.5 feet @ 5.4 Mhz) whip antenna according to your design, otherwise there would be no way to tune it. Coax and an additional antenna should be unnecessary... In fact, unless you've balanced the reactance for the 50ohm or 75ohm coax: it will only cause you extra loses from power reflections.
__________________
 
Reply With Quote
  #72  
Old 11-29-2011, 06:13 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Crystal radio

Quote:
Originally Posted by LetsReplicate View Post
No, that doesn't help because it does not predict parasitic capacitance (which is what gives a coil it's resonant frequency). The only way to determine parasitic capacitance is with an antenna analyzer or by measuring phase angle at the required frequency and calculating reactance from it.

The bottle coil is the loading coil for a 1/4 wave multiple (45.5 feet @ 5.4 Mhz) whip antenna according to your design, otherwise there would be no way to tune it. Coax and an additional antenna should be unnecessary... In fact, unless you've balanced the reactance for the 50ohm or 75ohm coax: it will only cause you extra loses from power reflections.
I see what you meant now.. The antenna side is just like that of a crystal radio's coil and antenna. I hadnt factored this into the equation. perhaps that's why there's the extreme variance from 50-100 kV arises using antenna setup.. I will do some math and see what I can find and will recompile a new diagram setup with full dimensions, turns, guage, and such of the entire circuit. :-)
__________________
 
Reply With Quote
  #73  
Old 11-29-2011, 06:22 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Coil

I use coil antenna... A straight antenna is possible..Sorry if I confused you.. Generally I speak in phrases (counter productive I guess unless were thinking the same).. But for experimentation.. People can use coil, straight, square...dipole.. Any sort of antenna (correctly attached to circuit of course). The 147' coaxial was an example for a vertical (80 lbs tension) at 5.4 Mhz :-) Like I said, an antenna and single diode can construct the entire setup.. The circuit just increases gain and transforms the sudo AC to DC :-)
__________________
 
Reply With Quote
  #74  
Old 11-29-2011, 09:21 PM
Seth0103 Seth0103 is offline
Junior Member
 
Join Date: Nov 2011
Posts: 5
Thank you for your quick response. I now have to rebuild the main circuit. I was playing around with the amazing light show producing arcs between the output leads and in a flash of light it all stopped working and one of my caps exploded. The underside of the circuit is burned. This next time around I will heed your warning and add a load or turn it off while not in use. What can I power with this?
__________________
 
Reply With Quote
  #75  
Old 11-29-2011, 09:31 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
What to power?

Quote:
Originally Posted by Seth0103 View Post
Thank you for your quick response. I now have to rebuild the main circuit. I was playing around with the amazing light show producing arcs between the output leads and in a flash of light it all stopped working and one of my caps exploded. The underside of the circuit is burned. This next time around I will heed your warning and add a load or turn it off while not in use. What can I power with this?
With 20kV at 1+ amps (might need little voltage, current regulation..:-)) I'm pretty sure you can power almost anything. At a constant 20kV you could power your home... Power yours and your neighbors on both sides or neighborhood (depending on size)... Charge a battery bank... Make a "perpetual" tesla coil (yard ornament??)... You can power just about whatever your heart desires.. As long as the devices voltage range doesn't exceed a constant 20 kV. Play with your antenna a bit to see if you can't get the 50-100 kV range :-) you could even have an electrician wire it to the grid and get paid for your contribution of energy? Can you still upload pictures of your circuit burnt or working it might help others :-)
__________________
 
Reply With Quote
  #76  
Old 11-29-2011, 09:36 PM
Seth0103 Seth0103 is offline
Junior Member
 
Join Date: Nov 2011
Posts: 5
Quote:
Originally Posted by ewizard View Post
Wow! Great work guys. Did I get it correct that Seth0103 is getting 22000 volts at 1.4 Amps ? !!! Are we really talking over 30000 Watts ? Or did he mean milliamps? I'm not seeing a lot of others in on this topic and wonder how many are aware of the successes here. There are a lot of hot topics right now with several other devices drawing a lot of attention due to some success. But I really like the essence of this idea and I think others will too once they have awareness of it. Note to self: get off butt and start building...
22156 Volts at 1.4 Amps after my transformer has processed the raw electricity.
__________________
 
Reply With Quote
  #77  
Old 11-29-2011, 09:45 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Just missed you..

Quote:
Originally Posted by Seth0103 View Post
22156 Volts at 1.4 Amps after my transformer has processed the raw electricity.
I just received your PM and I do not take money for this...what would there be to donate to? If you want, rebuild your circuit (not exploding it again)...demonstrate it for people you know... Or at a local school for teachers, parents, and kids... And if you want to invest money... Print out the schematics, pass them out.. And help whoever needs any assistance, or might have a question. (I'm always available too if you need help) thank you for the generous offer though.. Invest that money into your own projects or to expand this one for others :-)
__________________
 
Reply With Quote
  #78  
Old 11-30-2011, 03:10 AM
soundiceuk's Avatar
soundiceuk soundiceuk is offline
Silver Member
 
Join Date: Oct 2011
Posts: 969
I see the future as an open source community.

Many thanks for sharing your work.

You follow in Tesla's footsteps and share his vision.

Have you got any more mind blowing circuits or coils that are of great interest?

Did you talk to your Grandad much about Nikola Tesla?
__________________
 
Reply With Quote
  #79  
Old 11-30-2011, 11:38 AM
bbem's Avatar
bbem bbem is offline
Senior Member
 
Join Date: Sep 2011
Posts: 120
Congratulations

@mcombatti
What a nifty finding!
Am very impressed
I am living in 'the Netherlands' and as the name already suggests it's below or just above sea level.
What is your advise how to proceed?
__________________
 
Reply With Quote
  #80  
Old 11-30-2011, 02:52 PM
EMCSQ EMCSQ is offline
Member
 
Join Date: Apr 2010
Posts: 88
Plasma Ball

Hello

I would be interested in a circuit , which captures the 'radiation' of a plasma globe.
__________________
 
Reply With Quote
  #81  
Old 11-30-2011, 03:55 PM
Parav Parav is online now
Member
 
Join Date: Nov 2008
Posts: 50
Circuit

Quote:
Originally Posted by Seth0103 View Post
22156 Volts at 1.4 Amps after my transformer has processed the raw electricity.


Hi Seth,

I am a bit confused and or curious as to which circuit you are using. Is it the "circuit#5" in post #19--page 1 ?? or the one in post #56 -using the globe too???

That voltage and amperage you got are fantastic.

I built the circuit #5 and only got about 6 volts when I hooked it up to a Yagi Ham radio antenna

Can you please post your circuit and or pictures of same so we can get at replicating it ASAP.

Thanking you in advance --Paul
__________________
 
Reply With Quote
  #82  
Old 11-30-2011, 04:53 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Hello

Quote:
Originally Posted by soundiceuk View Post
I see the future as an open source community.

Many thanks for sharing your work.

You follow in Tesla's footsteps and share his vision.

Have you got any more mind blowing circuits or coils that are of great interest?

Did you talk to your Grandad much about Nikola Tesla?
He spoke a bit about him. Said he was kind of a quite guy... Would sit in silence contemplating most of the time...my grandfather said the most important thing T told him to remember was "Laws are only laws under certain circumstances. If there is not a need to break a law, nature will follow the law. If the circumstances or need to break a law exists, nature will make a new law." like newtons law of "what goes up, must come down"... Only valid for an object within a gravitational field... My grandfather always said there are universal laws that govern everything.. But we only know the laws for the circumstances we recognize and observe. Still working on using resonance of a magnetic field... Nothing mind blowing yet... But hopefully soon :-) a ferromagnetic field resonates at 108khz naturally ;-)
__________________
 
Reply With Quote
  #83  
Old 11-30-2011, 04:56 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Plasma globe

Quote:
Originally Posted by EMCSQ View Post
Hello

I would be interested in a circuit , which captures the 'radiation' of a plasma globe.
The circuit is the same... Just tune the antenna coil to the frequency of the globe to attain the largest quantities of power.. Even an untuned circuit will collect energy.. But then proximity of closeness to the globe and surface area of the collector become the key factors...
__________________
 
Reply With Quote
  #84  
Old 11-30-2011, 05:00 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Tuned circuit

Quote:
Originally Posted by bbem View Post
@mcombatti
What a nifty finding!
Am very impressed
I am living in 'the Netherlands' and as the name already suggests it's below or just above sea level.
What is your advise how to proceed?
Make sure you have accurately tuned your antenna to 5.4-7 MHz And it will work :-) a collection plate will be futile below the critical zone.. But with a tuned circuit the collector is unessesary to begin with...
__________________
 
Reply With Quote
  #85  
Old 11-30-2011, 05:07 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Replica

Quote:
Originally Posted by Parav View Post
Hi Seth,

I am a bit confused and or curious as to which circuit you are using. Is it the "circuit#5" in post #19--page 1 ?? or the one in post #56 -using the globe too???

That voltage and amperage you got are fantastic.

I built the circuit #5 and only got about 6 volts when I hooked it up to a Yagi Ham radio antenna

Can you please post your circuit and or pictures of same so we can get at replicating it ASAP.

Thanking you in advance --Paul
I believe he used my radiant circuit found on #56.. as that one is the only one I've posted which utilizes a transformer. :-) The prototype I've been using is aprox 30kV at 2 amps (fluctuates down to ~1.7amps). Forgot to take into account the capacitance of the coil..so am recalculating and modifying everything for a new instructional.
__________________
 
Reply With Quote
  #86  
Old 11-30-2011, 05:14 PM
LetsReplicate LetsReplicate is offline
Senior Member
 
Join Date: Nov 2011
Location: Canada
Posts: 120
Quote:
Originally Posted by Seth0103 View Post
22156 Volts at 1.4 Amps after my transformer has processed the raw electricity.
I have to call BS on that until I see how you measured it. Unless you're cooling that transformer with liquid nitrogen there is NO WAY it hasn't melted... In fact, I don't even think liquid nitrogen would do it at that power level: EVERY piece of wire in the circuit would get white-hot and melt.

I'm assuming you meant peak-to peak AC, and I'm going to assume it's a clean sin wave for simplicity, in which case the RMS voltage of 7833V. I also have to assume that current is peak-to-peak AC current of the same sin wave which translates to an RMS current of 0.49A. That means the output power is 3877W... Again, you'd need a beast of a transformer: but at least there are transformers for that power level that a person can access. None of them have an non-ferric cores however, so I have no idea how you manged to drive them with this circuit, they are also not constructed for high voltage. So unless you can show pictures that you're running a pole pig or something equally as monstrous: you must have measured incorrectly.
__________________
 
Reply With Quote
  #87  
Old 11-30-2011, 05:30 PM
Parav Parav is online now
Member
 
Join Date: Nov 2008
Posts: 50
Wow

Quote:
Originally Posted by mcombatti View Post
I believe he used my radiant circuit found on #56.. as that one is the only one I've posted which utilizes a transformer. :-) The prototype I've been using is aprox 30kV at 2 amps (fluctuates down to ~1.7amps). Forgot to take into account the capacitance of the coil..so am recalculating and modifying everything for a new instructional.
Hi Mat,

Wow, thank you , that is awesome.

Can you elaborate on the 2 caps after the spark gap and some more info on that step down transformer. Also can we get some values of the caps and resistors of that "electron cascade amplifier" which to me, might be the way to go.

Sorry to bug you for all that info but I can't tell you enough of how much I appreciate all that you have contributed so far on this device. This is exactly
the route I always wanted to go in my free energy research from day one.

Keep up the good work .--Paul
__________________
 
Reply With Quote
  #88  
Old 11-30-2011, 06:17 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Transformer

Quote:
Originally Posted by LetsReplicate View Post
I have to call BS on that until I see how you measured it. Unless you're cooling that transformer with liquid nitrogen there is NO WAY it hasn't melted... In fact, I don't even think liquid nitrogen would do it at that power level: EVERY piece of wire in the circuit would get white-hot and melt.

I'm assuming you meant peak-to peak AC, and I'm going to assume it's a clean sin wave for simplicity, in which case the RMS voltage of 7833V. I also have to assume that current is peak-to-peak AC current of the same sin wave which translates to an RMS current of 0.49A. That means the output power is 3877W... Again, you'd need a beast of a transformer: but at least there are transformers for that power level that a person can access. None of them have an non-ferric cores however, so I have no idea how you manged to drive them with this circuit, they are also not constructed for high voltage. So unless you can show pictures that you're running a pole pig or something equally as monstrous: you must have measured incorrectly.

You can buy a transformer here below..no oil...no resin...stays cool..no fan..no wires getting hot...no pole pig :-) (similar but more compact and more efficient..)

20kV or 24kV high voltage current transformer (CT) - Detailed info for 20kV or 24kV high voltage current transformer (CT),current transformer,20kV or 24kV high voltage current transformer (CT),1000 on Alibaba.com

it's about the size of a quart milk container... has a torroid configuration..which decreases the potential slightly..but it's negligible at high power levels :-)
__________________
 

Last edited by mcombatti; 11-30-2011 at 06:27 PM.
Reply With Quote
  #89  
Old 11-30-2011, 06:25 PM
mcombatti mcombatti is offline
Member
 
Join Date: Nov 2011
Posts: 54
Caps n parts

Quote:
Originally Posted by Parav View Post
Hi Mat,

Wow, thank you , that is awesome.

Can you elaborate on the 2 caps after the spark gap and some more info on that step down transformer. Also can we get some values of the caps and resistors of that "electron cascade amplifier" which to me, might be the way to go.

Sorry to bug you for all that info but I can't tell you enough of how much I appreciate all that you have contributed so far on this device. This is exactly
the route I always wanted to go in my free energy research from day one.

Keep up the good work .--Paul
The two ground caps are the "Limitation factor" If you use 2 50v...you'll only get 50v (maybe 55-60 sometimes ;-))..if you use two 2kv caps..you'll get 2kv...if you use 2 - 100kv caps...you'll get 100kv... etc... use fast switching diodes...and SWAMP resistors...regular resistors WONT WORK the same (they will work..but they will get hot..or "pop" (at which point they're broke..like a fuze)...read a little into radios and what swamp resistors are used for in amplifiers (of gain)...and you should find some calculations how to 'regulate' your voltage and current... it works in the same concept of a voltage doubler...but with resistors and diodes to multiply the current (while decreasing voltage)...A circuit can have the potential to draw the 50kV-100kV..but if you've limited the "charge pump" to only fill a lesser value...that is all you will get :-)
__________________
 
Reply With Quote
  #90  
Old 11-30-2011, 06:25 PM
Tishatang Tishatang is offline
Senior Member
 
Join Date: Jun 2008
Posts: 212
@mcombatti
Thank you for your valuable insights and willingness to help the common man.

I am wondering if I can take advantage of a large aluminum roof on my studio as a collector? It is approx 16 feet wide by 30 feet long. It sits within 40 feet of the power lines that run through my neighborhood to distribute power. The power line to my house runs right over it, only a few feet above. Would this ionize the roof as a collector? I am at 1300 ft altitude. If you were me, what approach would you try first. I am trying to keep the circuitry simple as possible as it is now difficult for me to solder, getting old.

Thanks again,
tishatang
__________________
 
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Please consider supporting Energetic Forum with a voluntary monthly subscription.

For One-Time Donations, use admin@ this domain > energeticforum.com

Choose your voluntary subscription

All times are GMT. The time now is 04:37 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v1.4.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.8 (Lite) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
2007-2015 Copyright - Energetic Forum - All Rights Reserved

Bedini RPX Sideband Generator

Tesla Chargers