2020 Energy Science & Technology Conference
PRE-REGISTER NOW!!!
http://energyscienceconference.com

shawnnweed · #**211** 08-03-2011, 06:46 AM

Quote:

Originally Posted by MonsieurM

From I would like to relate a post made by Power1 in relations to Crystal Ball power Cell/Peter Davey design

now we know how to break water...43 khz is needed

------

see: http://www.energeticforum.com/149089-post157.html

MonsieurM,

I can grasp the concept but to what end would you want to atomize water molecules? And would not the destruction of water molecules(splitting atoms) not lead to great explosions?

,Shawn

MonsieurM · #**212** 08-03-2011, 11:06 AM

Quote:

Originally Posted by shawnnweed

MonsieurM,

I can grasp the concept but to what end would you want to atomize water molecules? And would not the destruction of water molecules(splitting atoms) not lead to great explosions?

,Shawn

No I have no desire to atomize water, but you do remember that when you fabricate the quartz crystals you use water, right....and also the described effect applies as well in the production of electricity but at a lower frequency

We have a tendency to overlook the role of water in crystals, off course using Mstate water will increase the electromagnetic properties of the crystal being built, and water is likely to be present in the crystal in form of quantum water

Quote:

"Quantum Water" Discovered in Carbon Nanotubes

A new quantum state of water found in carbon nanotubes at room temperature could have important implications for life

"Quantum Water" Discovered in Carbon Nanotubes - Technology Review

Quote:

The application of the principles of one science into another is often neglected. Today we have a massive and growing volume of experimentally proven information that certainly does not always
find its every application (this data was taken from a fractal construct, so logically its application is multidimensional... )

see also: http://www.energeticforum.com/149653-post198.html

---------

I posted an info that could revolutionize the computing world

http://www.energeticforum.com/149839-post100.html

MonsieurM · #**213** 08-03-2011, 11:35 PM

I posted this a while back, and while re-reading through it, i think there is an info that is quite relevant to my previous post:

Inexplicable Superconductor Fractals Hint at Higher Universal Laws | Wired Science | Wired.com

Quote:

The qualities of a high-temperature superconductor — a compound in which electrons obey the spooky laws of quantum physics, and flow in perfect synchrony, without friction — appear linked to the fractal arrangements of seemingly random oxygen atoms....
...Those atoms weren’t thought to matter, especially not in relation to the behavior of individual electrons, which exist at a scale thousands of times smaller. The findings, published Aug. 12 in Nature, are a physics equivalent of discovering a link between two utterly separate dimensions. (obviously they know nothing about the Fractal Universe Theory pfff.... )

Quote:

“Such fractals are ubiquitous elsewhere in nature,” wrote Leiden University theoretical physicist Jan Zaanen in an accompanying commentary, but “it comes as a complete surprise that crystal defects can accomplish this feat.”

And I surmise that these defects (i would rather call them channels) can be controlled through frequency ( like ice crystals

)

read these 4 posts:

http://www.energeticforum.com/146538-post9.html

http://www.energeticforum.com/148474-post141.html

http://www.energeticforum.com/149531-post181.html

http://www.energeticforum.com/149296-post157.html

any thoughts

petar113507 · #**214** 08-04-2011, 04:13 AM

How would you control those "defects" with a frequency? what freq. would it be? Would it be in the growing phase of the crystalline structure? Or after th crystal was grown, to be bombarded with a certain "resonant" frequency which would spontaneously induce super conduction?

I think that super-conduction has to do with a certain shape. So, for instance migrating atoms, or leaving an empty part

That was the original point of looking at superconductivity -- was with the intent to be able to build it. So, I've been looking a little bit at silicon recently, as that is very easily obtainable for me near the beach.

Why is silicone interesting? Because we are made of carbon. Carbon is one half octave away from silicone.

http://www.reocities.com/capecanaveral/8989/russtbl.gif

Silicon is used in all of our modern day transistors and microprocessors. Silicon is also an element which is quite common around the world. Powerme left a vauge process for refining beach sand into high purity silicon, but I think I understand it. Hooking up HHO torch soon, so I will try this method of refining.

Carbon, is also the element which crystalizes into diamond -- the crystaline structure also becomming superconductive after doping with 3% boron. Boron comes just before carbon on Russell's table.

Superconducting diamond turns up in Russia - physicsworld.com

So why does silicone become superconductive when doped with boron?

http://www.reocities.com/capecanaveral/8989/compass.gif

Similarly, silicone carbide and aluminum become can also be superconducting. (you'll have to google it, I cant find it but read it earlier)

What does this tell me? Look at russell's charts. We are playing very similar atomic chords when we are cooling the silicone to superconductivity.

You know how you can play the same note on a piano, and shift one octave up? It sounds higher up, but you are still playing the same "note". I imagine that supeconductivity is a "note" that may be acheived in a vaiety of ways.

With that, I would also like to point out that silcon, having a similar cubic crystal to carbon. I am curently wondering if the shape of the crystal being formed has a link to superconductivity.

This seems to be what this article suggests.
Superconductors Go Fractal - Science News

Can you elaborate a little more on M-state water and "quantum water"? I do not like to ask too many questions without sharing my understanding, to make sure we are on the same page.

I am under the impression that water (the fractal antenna) briefly possesses a structure which induces very small windows of "superconductivity" near the center contracting axis of the vortex shape. I am under this impression that the magnets might "knock" the little superconductors out of position -- impregnating the water with a more electric property.

This has at least been supported by my experience with using one of these simple devices.
http://i31.photobucket.com/albums/c3.../Waterspin.jpg

Seeing as how our nervous system would become more sensitized after consuming this type of water, I beleive that my body would give me a "good" response (the water tastes sweeter) when I drink it.

It seems to make moss, and grass grow very vigorously (resilient to drought), and greener than the other, faucet-watered areas.

MM, you post very rapidly. I would love to continue "thinking out loud" in an open group, but it takes a bit longer than I'd like to fully articulate my thoughts. I will reply when I can -- you have my full attention.

Thank you for the brainfood

MonsieurM · #**215** 08-04-2011, 10:31 AM

Quote:

How would you control those "defects" with a frequency? what freq. would it be? Would it be in the growing phase of the crystalline structure? Or after th crystal was grown, to be bombarded with a certain "resonant" frequency which would spontaneously induce super conduction?

Dave45, could you give me a hand in answering this question, please?

Transition from one-dimensional water to ferroelectric
ice within a supramolecular architecture

----

Quote:

This has at least been supported by my experience with using one of these simple devices.
http://i31.photobucket.com/albums/c3.../Waterspin.jpg

the water spin apparatus looks Great petar113507, and yes it does taste sweet. I have a portable alkaline water, that give the same sweet taste, as totoalas describes it

Quote:

Originally Posted by totoalas

Healers when they placed their hands on a glas of water changed the taste
from tasteless to a little bt sweet r not gud taste when soeone is sick

In the Philippines we call ths paranormal activity

cheers

totoalas

we may have a partial answer given to us by Dave45, in this post http://www.energeticforum.com/131285-post7.html

please read also post made by IndianaBoys: http://www.energeticforum.com/147862-post121.html

the following is quote from the link provided to us by IndianaBoys

Quote:

This is Marko's drawing showing the emanations coming from the center hole of the torus. I don't think there is anything wrong with this, though it is putting the cart before the horse as they say. I think the part that is wrong is showing these emanations activating the 3, 6, and 9. I believe they are activated by their own fractal center. These fractal torus's are what create the emanations coming from center of the picture above.

I'll add more info as i digest your post

MonsieurM · #**216** 08-04-2011, 01:27 PM

Actually we already know of an experiment that works using the previoulsly mentioned properties (superconductivity):

AE1800 Project Quartz
INVENTION - Piezomagnetic Induction

Quote:

Aeonova’s Piezomagnetic Induction technology is a new way of generating electric power. It generates large pressure oscillations without an equally large amount of force required from a prime mover. These pressure oscillations (high frequency )are applied to piezoelectric transducers that convert the pressure into electricity. Our invention allows permanent magnet interactions to become an attractive way to generate the forces necessary for large scale piezoelectric power generation. By not using conventional electromagnetic induction we are able to produce electric power from free-spinning systems that are not bound by Lenz’s Law.

Quote:

Aeonova's method of generating electric power does not use electromagnetic induction to convert mechanical energy into electricity. Our method converts rotational mechanical energy into electric power by utilizing permanent magnet interactions to generate pressures on piezoelectric transducer elements.

INVENTION - Piezomagentic Induction

MonsieurM · #**217** 08-04-2011, 01:38 PM

Quote:

by utilizing permanent magnet interactions to generate pressures on piezoelectric transducer elements.

Isn't this the same procedure we use with the vortex trap ( http://www.energeticforum.com/144597-post39.html )

(fractal universe, isn't it ? )

MonsieurM · #**218** 08-04-2011, 01:53 PM

Quote:

With that, I would also like to point out that silcon, having a similar cubic crystal to carbon. I am curently wondering if the shape of the crystal being formed has a link to superconductivity.

I would refer you to the Synergetics school of thought:

http://www.energeticforum.com/138182-post31.html

http://www.energeticforum.com/138215-post32.html

http://www.energeticforum.com/138217-post33.html

(post 33 is a supposition based on the table of walter russell associated with Plato's solids...work in progress...not yet refined

)

MonsieurM · #**219** 08-04-2011, 05:08 PM

and:

Influence of magnetic fields on calcium salts crystal formation: an explanation of the ‘pulsed electromagnetic field’ technique for bone healing

Quote:

In the search for a mechanism by means of which a magnetic field deparalyses non-unions and enhances bone tissue formation, the influence of continuous magnetic fields on the formation of calcium phosphate crystal seeds has been investigated. From this perspective, an explanation is given of a working mode in conventional equipment for pulsed electromagnetic field treatment; this is compared with multifunction equipment.

ScienceDirect - Journal of Biomedical Engineering : Influence of magnetic fields on calcium salts crystal formation: an explanation of the ‘pulsed electromagnetic field’ technique for bone healing

----------

Effects of a Strong Magnetic Field on Protein Crystal
Growth

Quote:

The effect of a strong magnetic field on protein crystal growth is a new research field. Here, we review
research on protein crystallization in magnetic fields, including magnetic orientation of protein crystals, magnetic
control of effective gravity on earth, formation of protein crystals in various effective gravity, magnetic improvement
in crystal quality, magnetic increase in viscosity of protein aqueous solutions, damping of natural convection by
Lorentz force, etc. Four mechanisms are currently known to be involved in the effects of magnetic fields on protein
crystal growth and all of them may contribute to the improvement of crystal quality. High quality protein crystals
are critical in determining the structure of protein molecules by using X-ray diffraction analysis. Strong magnetic
fields will help to improve crystal quality.

ftp://124.42.15.59/ck/2011-01/165/01...l%20Growth.pdf

--------

if you want to run your own search on crystal growth, and find an info, please share, here is an interesting site on crystal growth worth searching (not a free website but you have access to their abstracts ):

ACS Publications - Cookie absent

MonsieurM · #**220** 08-04-2011, 05:26 PM

I just started reading this viewpoint:

Physics - Towards colossal magnetoelectricity?

Quote:

Towards colossal magnetoelectricity?

Dimitri N. Argyriou
Novel Materials Group, Department of Magnetism, Helmholtz-Zentrum Berlin für Materialien und Energie, Helmholtz Platz 1, Berlin 14109, Germany

Published August 23, 2010

Experiments show that it may be possible to achieve control of magnetization by an external electric field in a material by altering the balance between competing physical processes.

-------

Fractional charges fly between planes

Fiona J. Burnell and Shivaji L. Sondhi
Department of Physics, Princeton University, Princeton, NJ 08544, USA

Published June 15, 2009

Quote:

The fractional quantum Hall effect, thought to be special to two dimensions, may also flourish in three, providing a possible explanation for anomalies observed in certain 3D materials in high magnetic fields.

Physics - Fractional charges fly between planes

your pick: Tesla coil +quartz mix pyramid
Sonic Boiler coated with Quartz Mix

MonsieurM · #**221** 08-04-2011, 07:14 PM

small update on the caduceus air core in frozen normal water, i talked about a little bump, i re-did the experiment using another air core , I still got a bump so i took a picture of it....

nice little mountain...

MonsieurM · #**222** 08-04-2011, 11:31 PM

Dusty Shock Waves Generate Planet Ingredients

Quote:

- Shock waves around dusty, young stars might be creating the raw materials for planets, according to new observations from NASA's Spitzer Space Telescope.

The evidence comes in the form of tiny crystals. Spitzer detected crystals similar in make-up to quartz around young stars just beginning to form planets. The crystals, called cristobalite and tridymite, are known to reside in comets, in volcanic lava flows on Earth, and in some meteorites that land on Earth.

Cristobalite - Wikipedia, the free encyclopedia

Quote:

The mineral cristobalite is a high-temperature polymorph of silica, meaning that it has the same chemical formula, SiO2, but a distinct crystal structure. Both quartz and cristobalite are polymorphs with all the members of the quartz group which also include coesite, tridymite and stishovite. Cristobalite occurs as white octahedra or spherullites in acidic volcanic rocks and in converted diatomaceous deposits in the Monterey Formation of the US state of California and similar areas. Cristobalite is stable only above 1470 °C, but can crystallize and persist metastably at lower temperatures.

Tridymite - Wikipedia, the free encyclopedia

Quote:

Tridymite is a high-temperature polymorph of quartz and usually occurs as minute tabular white or colorless pseudo-hexagonal triclinic crystals, or scales, in cavities in acidic volcanic rocks. Its chemical formula is SiO2. Tridymite was first described in 1868 and the type location is in Hidalgo, Mexico. The name is from the Greek Tridymos for triplet as tridymite commonly occurs as twinned crystal trillings.[3] Tridymite can occur in several crystalline forms, which are metastable at ambient conditions, the most common being α and β. Alpha phase is orthorhombic, Pearson symbol oS24, group C2221, No.20 whereas β-tridymite is hexagonal, hP12, P63/mmc, No. 194. β-tridymite converts to β-cristobalite at 1470 °C.[1]

Metastability (a long lived but not a truly indefinite stability) describes the extended duration of certain equilibria acquired by complex systems when leaving their most stable state after an external action.

that is why probably crystal power cell don't last indefinitely

-------
from the info i posted a while back:

Viscous cycle: Quartz key to tectonics

Quote:

“Over the last few decades, we’ve learned that high temperatures, water and abundant quartz are all critical factors in making rocks flow more easily,” Lowry says. “But until now, we haven’t had the tools to measure these factors and answer long-standing questions...

Now Translate the following to our subject at hand

Quote:

..If temperature and water are the same, Lowry says, rock flow will focus where the quartz is located because that’s the only weak link. Once the flow starts, the movement of rock carries heat with it and that efficient movement of heat raises temperatures, resulting in weakening of crust.”

any suggestions

MonsieurM · #**223** 08-04-2011, 11:46 PM

Out of the Box Thinking Produces Safer Water

Quote:

To avoid these problems, Atlantium developed an entirely new UV system that puts an advanced UV source outside the flow of the water. In order to achieve effective inactivation the Atlantium system uses a quartz tube as its reactor and bombards the flowing water with homogeneous dosages of UV radiation. Using the same principle as fiber optic technology, quartz walls of the tube reflect the UV light so it reaches every drop of water effectively. This method actively eliminates all of the drawbacks of existing UV technology. By taking the UV source out of the water and projecting it into the quartz chamber, Atlantium's engineers are able to supply homogeneous distribution of the UV rays, eliminate the local heating and thus the scale and fouling, as well as the need for brushes to clean the chamber. Controlling the temperature of the external UV lamp (not possible when the lamp is in the water) helps control the power needed by the light source and reduce operating and maintenance costs.

MonsieurM · #**224** 08-05-2011, 12:10 AM

Scavenging energy waste to turn water into hydrogen fuel

Quote:

The process is simple, efficient and recycles otherwise-wasted energy into a useable form.

"This study provides a simple and cost-effective technology for direct water splitting that may generate hydrogen fuels by scavenging energy wastes such as noise or stray vibrations from the environment," the authors write in a new paper, published March 2 in the Journal of Physical Chemistry Letters. "This new discovery may have potential implications in solving the challenging energy and environmental issues that we are facing today and in the future."

The researchers, led by UW-Madison geologist and crystal specialist Huifang Xu, grew nanocrystals of two common crystals, zinc oxide and barium titanate, and placed them in water. When pulsed with ultrasonic vibrations, the nanofibers flexed and catalyzed a chemical reaction to split the water molecules into hydrogen and oxygen.

Quote:

When the fibers bend, asymmetries in their crystal structures generate positive and negative charges and create an electrical potential. This phenomenon, called the piezoelectric effect, has been well known in certain crystals for more than a century and is the driving force behind quartz clocks and other applications....
...Xu and his colleagues applied the same idea to the nanocrystal fibers. "The bulk materials are brittle, but at the nanoscale they are flexible," he says, like the difference between fiberglass and a pane of glass.

Smaller fibers bend more easily than larger crystals and therefore also produce electric charges easily. So far, the researchers have achieved an impressive 18 percent efficiency with the nanocrystals, higher than most experimental energy sources.

In addition, Xu says, "because we can tune the fiber and plate sizes, we can use even small amounts of [mechanical] noise — like a vibration or water flowing — to bend the fibers and plates. With this kind of technology, we can scavenge energy waste and convert it into useful chemical energy."

you'll find the patent below and Power1 instructions here : http://www.energeticforum.com/149735-post208.html
Huifang XU, et al -- Zn Oxide photoelectrolysis

To POwer1....

MonsieurM · #**225** 08-05-2011, 12:54 AM

Quote:

Now Translate the following to our subject at hand

Quote:

..If temperature and water are the same, Lowry says, rock flow will focus where the quartz is located because that’s the only weak link. Once the flow starts, the movement of rock carries heat with it and that efficient movement of heat raises temperatures, resulting in weakening of crust.”

and this too

Quote:

Certain rocks contain tiny crystals like feldspar and quartz—nano-meter sized magnetic inclusions that lock in a record of the Earth’s magnetic field as they cool from molten magma to hard rock. Simply finding rocks of this age is difficult enough, but these rocks have also witnessed billions of years of geological activity that could have reheated them and possibly changed their initial magnetic record. To reduce the chance of this contamination, Tarduno picked out the best preserved grains of feldspar and quartz out of 3.2 billion-year-old granite outcroppings in South Africa. Feldspar and quartz are good preservers of the paleomagnetic record because their minute magnetic inclusions essentially take a snapshot of the field as they cool from a molten state.

enjoy....

MonsieurM · #**226** 08-05-2011, 01:16 AM

Study Finds New Properties in Non-Magnetic Materials

Quote:

A team of Penn State researchers has shown for the first time that the entire class of non-magnetic materials, such as those used in some computer components, could have considerably more uses than scientists had thought. The findings are important because they reveal previously unknown information about the structure of these materials, expanding the number of properties that they potentially could have. A material's properties, such as electrical conductivity and mechanical strength, are what determine its usefulness. The research will be published in the journal Physical Review Letters.

Quote:

The non-magnetic materials that Gopalan and his colleagues studied were thought to have one of the 32 different crystal symmetries--called point group symmetries--known to exist in nature. On the other hand, magnetic materials have 90 different point group symmetries because their atomic particles have magnetic spins, which can be imagined as tiny loops of current. "Motion is an extremely important aspect of magnetism," said Gopalan. "Magnetism develops in nature as soon as charged particles start moving or spinning."

Scientists long have believed that symmetry allows magnetic materials to have more properties than non-magnetic materials because flipping the direction of spin creates an additional symmetry. But Gopalan's team has shown that non-magnetic materials, theoretically, can have just as many properties as magnetic materials. According to Gopalan, some non-magnetic materials have groups of atoms that distort by twisting or rotating. This slight movement is equivalent to a tiny loop of current and is enough to give the material some additional properties that previously were thought to belong only to magnetic materials.

Dave45 · #**227** 08-05-2011, 02:36 AM

Got back into town today, if you use a solenoid type coil with distilled water you can see the field lines but you have to let it freeze for three to four days.

Also Iv noticed if you put the water inside say a pvc pipe you would expect it to freeze and bust the pipe but if its wrapped with a coil that produces a magnetic field it wont bust the pipe.

To me looking at the field lines in the ice it looks as though the field is borrowing through the ice like small circular holes, very interesting.

Hopefully now that Im back home I'll have a chance to do more experiments, the Smith coil has me curious I want to compare the mag field to another normaly wound coil with the same number of turns, you see I wound the Smith coil I have because of the way the mag field runs. I had never heard of the Smith coil before I wound one.
I dont like the reference that calling it a caduceous raises, I shy away from anything that has references to a serpent.

I guess Im old school in that I believe that there is only One God our creator, and He can be learned about in the written Word the Holy Bible.
In the old days the demons were called what they were demons not aliens, there is a great deception coming they will land they will make contact, but they have been here all along they are inter dimensional beings and they dont have your best interest in mind.

right hand twist -------------->
<----------------left hand twist

IndianaBoys · #**228** 08-05-2011, 06:52 AM

Quote:

Originally Posted by MonsieurM

small update on the caduceus air core in frozen normal water, i talked about a little bump, i re-did the experiment using another air core , I still got a bump so i took a picture of it....

nice little mountain...

MonsieurM,

Do you have a cover on top of the water to rule out the freezer fan blowing the water?

Also, create some colloidal silver and add it to your water, should allow the lines of force to be more visible.

IndianaBoys

MonsieurM · #**229** 08-05-2011, 10:40 AM

Quote:

Originally Posted by Dave45

Got back into town today, if you use a solenoid type coil with distilled water you can see the field lines but you have to let it freeze for three to four days.

Also Iv noticed if you put the water inside say a pvc pipe you would expect it to freeze and bust the pipe but if its wrapped with a coil that produces a magnetic field it wont bust the pipe.

To me looking at the field lines in the ice it looks as though the field is borrowing through the ice like small circular holes, very interesting.

Hopefully now that Im back home I'll have a chance to do more experiments, the Smith coil has me curious I want to compare the mag field to another normaly wound coil with the same number of turns, you see I wound the Smith coil I have because of the way the mag field runs. I had never heard of the Smith coil before I wound one.
I dont like the reference that calling it a caduceous raises, I shy away from anything that has references to a serpent.

I guess Im old school in that I believe that there is only One God our creator, and He can be learned about in the written Word the Holy Bible.
In the old days the demons were called what they were demons not aliens, there is a great deception coming they will land they will make contact, but they have been here all along they are inter dimensional beings and they dont have your best interest in mind.

right hand twist -------------->
<----------------left hand twist

Nothing wrong with old school, you know what they say the best soup are made in old pots (not referring to age, but an appreciation of old school )

Smith Coil it is then...

looking forward to hearing your tests on it

Mladen · #**230** 08-05-2011, 11:13 AM

Hi all,

there is another interesting way to harvest energy from Sun, and using it for supplemental heating of your home. You can make you own solar air heater by recycling pop cans. Check this step-by-step manual an net: Solar panel made of pop cans for home solar heating

Regards,

MonsieurM · #**231** 08-06-2011, 01:22 AM

Good to see people trying to replicate John Hutchinson crystal power cell

MonsieurM · #**232** 08-06-2011, 03:05 AM

I just reposted some info on another thread and it occured to me that these are just as relevant to our topic... ready for it

Quote:

.Think of a fractal antenna for what it is: a tuned LC circuit

replace the word antenna with defect

from:http://www.energeticforum.com/150302-post264.html

Quote:

from a 2002 article. Unlike so many other promising breakthroughs this is one that has been widely implemented.
To further quote from the article: "The innovation, called Fractal Structure Circuit(TM) (FSC), uses fractalized conductor paths to replace the capacitors, inductors, and resistors in "RLC" circuits."
And another quote: ""Virtually every electronic device uses coils and capacitors to form RLC circuits. These discrete components are arranged by tried and true rules to get the circuit to perform as needed. What we've done is ask: can a fractal pattern, with its self-capacitance and self-inductance, be used to eliminate components and still get the equivalent RLC circuit? We've found that the answer is yes; and in most uses, especially at microwave frequencies, all components can be replaced by conductive fractal patterns or 3D structures."
And one more blurb from that article: " Looking at the Fractal Structured Circuit(TM) one sees, for example, a beautiful etched copper pattern replacing the usual traces connecting button or canned shaped capacitors and coils (or their SMT counterparts). "
Here is the link to that article.
Fractal Antenna Systems, Inc.

enjoy...

Dave45, How is your testing of the Smith Coil going?

MonsieurM · #**233** 08-06-2011, 11:26 AM

Quote:

Originally Posted by IndianaBoys

MonsieurM,

Do you have a cover on top of the water to rule out the freezer fan blowing the water?

Also, create some colloidal silver and add it to your water, should allow the lines of force to be more visible.

IndianaBoys

I will try your suggestion and cover the experiment, don't have colloidal silver unfortunately, maybe a simple colorant would do the job?

ps: so what do you guys think of the previous post, you realize what it means and its implication...

MonsieurM · #**234** 08-06-2011, 12:12 PM

Quote:

Originally Posted by Armagdn03

I wish I knew exactly what he was talking about, ill have to look into that statement. Reminds me of something I am currently working on (although very slowly)

Cross Field Capacitor

Armagdn03, i have some info about your set up (this is applicable to a capacitor too

) ;

Graphite-Water Battery – Instant Charging Super-Batteries

Quote:

Now, Dr Li and his team have discovered the key to maintaining the remarkable properties of separate graphene sheets: water. Keeping graphene moist – in gel form – provides repulsive forces between the sheets and prevents re-stacking, making it ready for real-world application. “The technique is very simple and can easily be scaled up. When we discovered it, we thought it was unbelievable. We’re taking two basic, inexpensive materials – water and graphite – and making this new nanomaterial with amazing properties,” said Dr Li.

When used in energy devices, graphene gel significantly outperforms current carbon-based technology, both in terms of the amount of charge stored and how fast the charges can be delivered. High-speed, reliable and cost-effective energy storage systems are critical for the future viability of electricity from renewable resources. These systems are also the key to large-scale adoption of electrical vehicles. Graphene gel is also showing promise for use in water purification membranes, biomedical devices and sensors.

Graphite-Water Battery – Instant Charging Super-Batteries

Graphene capacitors might replace batteries- The Inquirer

Quote:

Obviously graphene ultra capacitors are some ways from hitting the shelves but when they do they are expected to rival Li-ion batteries in capacity. However the characteristics where the graphene ultra capacitor technology already surpasses Li-ion are the time it takes to charge and cyclical longevity.

Apparently the majority of batteries operate in the 20 to 50 per cent capacity range, and graphene ultra capacitors take just minutes to reach those levels

see my posts on graphene used in Mobius Resistance here:

http://www.energeticforum.com/143990-post101.html

http://www.energeticforum.com/144235-post111.html

I still have to find a way of making graphene homemade style...if anyone knows how besides the scratching method see video below , we would be grateful

Home-made graphene « A quantum of science

------

Quote:

Got back into town today, if you use a solenoid type coil with distilled water you can see the field lines but you have to let it freeze for three to four days.

I'll try it

MonsieurM · #**235** 08-06-2011, 01:14 PM

Quote:

Originally Posted by petar113507

How would you control those "defects" with a frequency? what freq. would it be? Would it be in the growing phase of the crystalline structure? Or after th crystal was grown, to be bombarded with a certain "resonant" frequency which would spontaneously induce super conduction?

I think that super-conduction has to do with a certain shape. So, for instance migrating atoms, or leaving an empty part

That was the original point of looking at superconductivity -- was with the intent to be able to build it. So, I've been looking a little bit at silicon recently, as that is very easily obtainable for me near the beach.

Why is silicone interesting? Because we are made of carbon. Carbon is one half octave away from silicone.

http://www.reocities.com/capecanaveral/8989/russtbl.gif

Can you elaborate a little more on M-state water and "quantum water"? I do not like to ask too many questions without sharing my understanding, to make sure we are on the same page.

Seeing as how our nervous system would become more sensitized after consuming this type of water, I beleive that my body would give me a "good" response (the water tastes sweeter) when I drink it.

It seems to make moss, and grass grow very vigorously (resilient to drought), and greener than the other, faucet-watered areas.

MM, you post very rapidly. I would love to continue "thinking out loud" in an open group, but it takes a bit longer than I'd like to fully articulate my thoughts. I will reply when I can -- you have my full attention.

Thank you for the brainfood

I hope that when you read my post on Graphene, you realize that if you add "one half octave" you can apply the same to silicone

our nervous system is Fractal in its architecture, I'll give you a pointer, read post Harvesting Energy From the Sun Using Crystals

Quote:

I am under the impression that water (the fractal antenna) briefly possesses a structure which induces very small windows of "superconductivity" near the center contracting axis of the vortex shape. I am under this impression that the magnets might "knock" the little superconductors out of position -- impregnating the water with a more electric property.

This has at least been supported by my experience with using one of these simple devices.
http://i31.photobucket.com/albums/c3.../Waterspin.jpg

When you vortex water you increase the level of oxygen present in water, and thus i refer you to this post Harvesting Energy From the Sun Using Crystals

Fractal Vortices

ps: I would still love to see someone try the peter davey crystal power cell

post updated: Harvesting Energy From the Sun Using Crystals

-------

LEARN TO SEE THE CIRCUIT IN NATURE

http://www.energeticforum.com/150302-post264.html

gene gene · #**236** 08-07-2011, 04:27 PM

Hi Dave, In your post #227 you speak of non-bursting of pvc pipes with coils. Have you done much experimenting along these lines? I live in the northwoods of Wisconsin, and many people here are faced with controlling pipe freeze problems in our harsh winters. The usual method is by using electrical heat tapes and insulation. These heat tapes are glutinous energy consumers. Might the use of coils and magnetism be a more efficient means of solving our pipe freezing problems?

I would be interested in doing some experimenting with this, and would appreciate any help in where and how to start.
Thanks, Gene
I hope this is not to far off topic.

MonsieurM · #**237** 08-08-2011, 10:20 PM

Check this thread out, i think Michael John Nunnerley

has shown us the missing piece of the puzzle

3D electromagnetic field

Dave45 · #**238** 08-09-2011, 01:58 AM

Quote:

Originally Posted by gene gene

Hi Dave, In your post #227 you speak of non-bursting of pvc pipes with coils. Have you done much experimenting along these lines? I live in the northwoods of Wisconsin, and many people here are faced with controlling pipe freeze problems in our harsh winters. The usual method is by using electrical heat tapes and insulation. These heat tapes are glutinous energy consumers. Might the use of coils and magnetism be a more efficient means of solving our pipe freezing problems?

I would be interested in doing some experimenting with this, and would appreciate any help in where and how to start.
Thanks, Gene
I hope this is not to far off topic.

Hi gene the pvc pipe i used was an open ended tee, Ill try and post some pics, Im not sure it would be economical to wrap a long pvc pipe in copper besides the water is your system is under pressure Im sure that would make a difference.
But you never know till you try.

Dave45 · #**239** 08-09-2011, 02:13 AM

This could be feasible using ice.
Maybe I should clarify that statement, the structure would be feasible.

MonsieurM · #**240** 08-09-2011, 10:30 AM

Quote:

Originally Posted by Dave45

This could be feasible using ice.
Maybe I should clarify that statement, the structure would be feasible.

you'll need a mold to build it ....am i correct...

the point that Mike was making is that the 3D field exist (proof being the experiments i posted in the thread) and it is a component of electromagnetic that has been ignored...if we understand it, we can play with it...

Dave, have you tested the Smith Coil ?

2020 Energy Science & Technology Conference PRE-REGISTER NOW!!! http://energyscienceconference.com

2020 Energy Science & Technology Conference
PRE-REGISTER NOW!!!
http://energyscienceconference.com