This thread has be established exclusively for discussion on the SR 193 Device.

In this thread, the assumption is the device functions and is not a hoax.

Thank you.

See the YouTube Video about it: English Translation SR 193 Replication of Kapanadze Device

See my blog.








WARNING: WHILE THE INITIAL INPUT VOLTAGE IS LOW, THERE IS STILL A SIGNIFICANT DANGER FROM ELECTRIC SHOCK. THIS INFORMATION IS PROVIDED ONLY FOR INFORMATIONAL AND EDUCATIONAL PURPOSES. USE AT YOUR OWN RISK.

DISCLAIMER: The authors of this thread assume no liability for any incidental, consequential or other liability from the use of this information. All risks and damages, incidental or otherwise arising from the use or misuse of the information contained herein are entirely the responsibility of the user.

See one of my most recent posts on how the device operates.

This is a recent post of mine in which I list the elements of the device.

You are 100% correct about that
It means SR device IS parametric oscillator.
I see clearly how it is possible with parametric oscillator to accumulate energy.
It is done in "two frequencies mode" - internal high frequency is used to step amplitude of oscillation up (which means voltage because it's better controllable) - the second period between min and max amplitude is external lower frequency.Do you see it ?

For any external process such device is visible as a device having much higher power then input power.The only problem which remains is to eliminate lenz law and we have a very simple yet powerful free energy device.

Good points, Boguslaw!

I'm still trying to figure out how many kicking coils there are, whether the HV flyback coil is involved in kicking at the precise time, whether the small blue and white vertical coil is a sensing coil, whether the same blue and white vertical coils is connected to the low voltage frequency generator, and so on.

This is my suggestion.



reference: Vladimir Utkin

my smith kanapadz replication

It's in Russian, mostly.

Suggestion: try using Google Translate

Is it a parametric response or is it a postive feedback? Is there a difference? Is it both? A combination of each? I've put many hours into this over the last 6-8 months, my understanding of the phenomenum is very limited and I can only go on a few experiments I've conducted and a little of what I could find in reading on the subject.

Lots of clues out there but nothing specific as to designing a circuit that would respond in that way. Parametrics, as I understand it, is the input of one frequency and doubling or trippling it in the main tank. This is fairly easy to do. A basic tank LC circuit with 2 diodes will do it. Positive feedback is a little more dificult using coils or coils and capacitors.

In the drawing above you have a positive feedback and a collapse which starts the process over again by firing the circiut. What would cause the collapse and restart? Possibly an extraction of energy at it's peak gain?

If you have a coil and cap or two coils the feedback needs to be slightly out of sinc with each other so it feeds a little energy back at the right time to enhance the process or amplifying, thus increasing amplitude of the wave. This might have similar characteristics to a mike and amplifier feedback.... the microphone picks up the signal, amplifies it and sends it back to the mike over and over again. This is fairly easy to replicate in a simple amplifier circuit but is quite destructive. The amplitude continues to build until it fry's components.

There are similarities in the Cook and Hubbard coils as well which used this or a similar method of feedback. Unfortunately the patents on these have details that are intentionally ommited. Circuit D in the Cook patent is non existant as an example.

I've found that if you build a tank circuit for a specific frequency and drive it slightly off by an input frequency you can achieve a positive feedback effect, it works with both parallel and series LC. The effect is a buildup and ringdown. This would be unity as I see it as the increase is gradually built up and equally brought back to zero to restart over again. The difference in the intense build up is offset by the ringdown which is exactly the same energy put in to the system. But it can appear to be OU in how it reacts to the load. In reality it is simply a higher efficiency or better use of the energy put into the system.

It becomes intense enough to burn up inductor coils when this occurs ( possibly why the TPU was said to run hot ). I've burned up a few coils experimenting as well.

I'd be very interested in any input or comments about this phenominum...
________
Paxil attorney

As far as I understand, from what I have learned from Smith at track 2:01 and what selfonlypath said in his videoYouTube - Scalar waves / Design rules / Part 1 at track 6:15, the closed looping device has a control mechanism which prevents the generator in a closed looping system from over-producing power and consequently burning up the generator or the load. The over-energy portion, i.e., increasing portion of the above wave form comes from the output coil. My understanding is when a certain level of power is obtained, the device senses this level, then triggers the relay and restarts the cycle again.

Thanks, Luno. Good job in finding this for us.

I could be wrong, but this YouTube video posted by Willer7B looks like a successful open-looping system replication of the SR193 device.

The video is entitled, tiger2007 реплика2.3gp, and it appears that the device won't work without being earth-grounded.

I took the liberty of taking a print-screen image shot of his schematic.



Not very clear. After inverting the image, it seems a little more clear.



We need a better more clear image of his schematic.

Here is the translation of the Russian text according to Google Translate:

Everything is much easier to install all 3 windings, the main excitation of the ferrite. Neither of the resonance in the windings and circuits not. The entire catch in the AFC and F. Tariel said "I found the key." This key - as simple as the node that controls: output voltage, load resistance, all through the excitation regime of the ferrite.

Diod
Tiger, Kinh shemku and winding technology trance, really want them!

Cardboard tube outer diameter of 50mm, vnutrinnyaya - 40mm, among them a broken iron from TVS and sedges TVs. outside of the foil inside the foil. Length 140 mm. winding of the pump on one half vnaval turns 50 wire 2mm, it served 50 Hz pulses 12c. winding removal - the same wire turns 20 on the other half, her lamp 12c 10vatt. sparks on the inside the foil, the external useless when the light is sincere in full glow, the current consumption drops by a quarter. Good luck to all is simple.

AvxMx
I understand that the iron is not in contact with the foil, and cardboard is separated from her? Foil with a longitudinal incision? otherwise it will short-circuit loop.

Tiger2007
Yes it is, although in the experiments I've tried and stick foil directly on the ferrite in the form of segments or pieces of various shapes, the effect is still there, although it depends a lot on what.

Pupil
tiger2007, and the ground there? and place it (grounded) plug? on the outer plate?

Tiger2007
With land at all funny, can spark between the ground and inner plate (the most efficient way) Iskra just a piece of wire about two meters (brightness drop slightly) tried to do without land (off normally, but all current hits).

Serge
spark postoyankoy or recess?

Ravil_V
Tiger2007 you have not tried the effect on the brightness of the lamp is placed inside a grounded wire coils?

Pupil
tiger2007 and the role of top coat? I thought her grounding connections. and that do not quite understand where the spark between the earth and the inner plate? I rasterennosti.

Tiger2007
Proven options: 1 cold end of the fuel assembly - the external foil, hot end of the fuel assembly - internal foil - gap - the land (best option) 2 cold end of the fuel assembly - the external foil hot end of the fuel assembly - spark - internal foil (no land - works well but it beats the statics) 3 cold end of the FA - external foil goryachiykonets TVS - arrestor - internal foil - the land, works well statics does not beat. Try.

Papuas
Collecting scraps of other forums on tiger2007:

Try running in parallel to put an electrolyte, in my capacity 3300mkf, the scheme is accurate, transistors T1 T2 - T3 kt819 kt829.

Attention everyone! the upper mantle must be well insulated from the windings. I hit a, now works only during the discharge on the ground. Need a good insulating material such as varnished cloth, Teflon, mica .....? Maybe somebody else's?

I have obtained isolated layers of Whatman paper okolo1mm the thickness of pipes where it so. Aluminum foil.

This task is a sharp blow to ferrite magnetic pulse and for a short time to introduce it into saturation, and preferably far beyond saturation. The power supply should be as powerful as the higher the voltage the better it seems to me that the 12volt is a lower limit. When I lit the lamp 220volt I threw back the stabilizer at the inlet was 18 volt current is about 3. On my way out of the power supply to additional electrolytes total capacity 6600mkf (2pcs of 3300mkf). Transistors must be taken to a large gain or make the components, be sure to keep plenty of current pulse I have a pretty good working kt829a although heated strongly. Low frequency is better to play, I have the maximum impact was at a frequency of about 350 - 400Hz, video installation works at 50 Hz, efficiency below 1.

As a master oscillator, I tried to flip-flop the two transistors, now I have a hard block on a chip SAD k174 ha11 slightly altered, added extra set of capacitors to increase the frequency of adjustment. The gap in the discharger affect much.

PS: It remains only use the paper as an insulator and a filter on the ion ... Crying my little feritiki (where hole total 6mm), and eternal fanariki, but can there naprugu reduce ...

tiger2007
Hello. I just want to try to wind the coil ferrite from the OS a little Chinese color TV. The coil is toroidal. I'll try to swing it I think this stuff should be all in bulk. If you will try to describe as detailed as possible. In general, strangely, I tried to make as simple as possible. There are only two frequencies skreschivayutsya: 1 low frequency rectangle - the purpose of a sharp blow to the material to get the shock of magnetostriction and magnetic field to obtain a 0.5 Tesla NMR .2 for a possible high-voltage bipolar pulse goal is to get a strong static field to display the names in the delicate balance and also get a wide range of high frequencies that would get in the NMR and at the same time possibly other possible types of resonances, even in theory it is difficult to miss. So I think.

Alien
Rings separately or rolled into a tube, also have properties to conduct current. Hence - we have another vicious cycle of (first-in foil, as I understand, removed))). Tigers have this problem solved machine - pieces of ferrite are much greater than R sintered ring.
As you are such an idea? Maybe in this replica does not plow?

Papuas
tiger2007 - and iron filings from the processing tool in your case there is no ferrite? & Powder tightly packed?

PS: And then there modelc I have (so far under-theory, but for her around and chat while CE) - all seen as sawdust are added to the ring in determining the effect MPs on these rings can poiskrit, ie them (or they) may cause to rotate, and then the type of gravity, and a ring with maloogranichennoy (free) circulation of the trajectory (at the electrons are no longer running in the geometry of the closed ring wire) ...

Ingener
Tiger single-cycle of the primary pump may also mistake, it is necessary and also the push-pull as explosive pulses (version). Can primary cell power is not needed (as said above) - just like the SR 1 pair of transistors, then what TVS swings?
A more interesting to try to the end of the ferrite core permanent magnet stick - as unipolar pulses in the current model, the magnet will be possible to "recover" seredechnik a side effect will increase
In general, industrial 2-stroke scheme for two NPN: (sketched with a BB generator tubes in the monitor)

vlad112
Tiger: So all the same cocktail of iron? Do experiments, put in a ferrite rod from the radio 400NM shone in the coil, so the rod for 3 minutes reach a high temperature (up to approximately 100gradusov). Probably the iron entered into resonance. Did you have a heating coil of this, whether, in the resonance high-frequency ferrite?

tiger2007
Yes I have a cocktail of ferrites, and pounding the OS, TVS, from impulsnika television. In addition, I have tried all sorts of ferrites bring to magnetostriction. Best of TBC it rings in many frequencies, very good magnetic antenna receivers, easily aroused by the OS. I could not simply bring a ring of power supplies of computers and even some unknown nature.

vlad112
Would make sense if glued to the tube an equal number of LF and HF rings with alternating through one?

B4
Tiger, so goes to repeat the experience needed iron from broken OS?

tiger2007
Well, I have no rings, no, what could I do? I'll be torturing whole piece, and everything will be clear.

diod
The lowest point Curie iron brand 2000NN - 70 degrees. Ring (yellow) in the computer PSU is not out of the ferrite!

adron
and ferrite can be isolated from the BB do not need, or cardboard for explosives is not an obstacle?

serge
tiger2007, you watched the effect without the top foil?

Yes,this is it.Plus in time of triggering relay there should be unidirectional energy transfer from such oscillator to receiver and that's all. Receiver works on lower frequency of oscillator and is using oscillating transformer to step down voltage.OR just a big cap bank and inverter like Don Smith shown in patent (it is really Tesla radiant receiver)

Here is my attempt to make sense of this image.



I'm sure if selfonlypath saw this image, being that he is an electrical engineer, he could figure out a circuit diagram for this device, and upload it here for all to see.

This is a refinement to the previous diagram.

So tiger2007 and writes that many historians, this transistor with a frequency of 50 - 200 - 400 Hz. Everything is normal, if the pulse duration is small. Of course KT829 in this part of the scheme, in my opinion, not the best choice. It is a low voltage and slow. Maybe something for bipolar strochnikov better it would be.
Another question - that of the multivibrator tiger2007 on 2 transistors, and it may well run at 20 kHz, and the lamps at 200 watts from it can burn.

Some translations from Тариэл Капанадзе и его "чудо генератор" - Страница 7

scratchrobot

THIS IMAGE IS TO BE CONSIDERED AS MORE OF A BLOCK DIAGRAM THAN A SCHEMATIC



Open-looping System.

However, in addition, the device has a dual output.

Diagram submitted for your review.

vidbid, cool stuff!!!

i suggest an independant pulse generator to each circuit, so you can play with frequencys of both high voltage circuit, and low voltage circuit!! just a tought!

hugs

That's a great post.

Thanks

Электронный ЛАТР для опытов по модуляции 50 Гц
Electronic variac for the experiences with 50 Hz modulation


ВВ с модуляцией, для опытов_G
HV with modulation for the experiences_big_


ВВ с модуляцией, для опытов
HV with modulation for the experiences


Схема для запитки 50 Гц катушки основного поля от SR
Circuit for power the main field coil with 50Hz (given by SR like example)

Can somebody who speaks Russian translate tiger2007's videos?

That will help us all.

The Refinement #2 Schematic needs some correction. In the video, there seems like there is a little blog over the emitter. Someone has suggested that it is probably ground. He suggests that if you watch the video over and over and over again, you will see better than a still image. He suggest that there is no diode anywhere on this schematic.

See YouTube videos:

YouTube - tiger2007 реплика2.3gp

YouTube - tiger2007 реплика.3gp

Never mind with respect to the diodes. That was my suggestion.

Okay, here are the translations via Google Translate


YouTube - tiger2007 реплика.3gp
Comprises a fully. NOTE. Current consumption. He fell, and reliability - Interest on 20-25. See below. DISCONNECT THE EARTH. Lamp lights. And all of them in about Tariel [Kapanadze] In case of bad Grounding. It's still a little reworked SCHEME. Included. HERE effect is weak. Well, just WIRE nowhere connected (order of 2 meters, plays a role PRIVACY antenna or capacitor). Pay attention to the Compass. OU, How to make. So ... PATTERN

YouTube - tiger2007 реплика.3gp
YouTube - tiger2007 реплика.3gp
THIS IS SETTING, discharge, GROUNDING. EARTH MADE TO PIPE BATTERY [HEATING]. LAYOUT CONSISTS: THIS GENERATOR 50 Hz. THIS IS HIS OPTION. THIS IS PUMPING winding 50 Hz. BOT high voltage generator. So this is the cover, for which a High Voltage. INSIDE. THIS IS OUTSIDE CONTACT. It is now below the reels. Included. Nothing has ISKRA. Produced without the High Voltage. LOOK current consumption. GETTING STARTED ISKRA. LOOK EFFECT. BOT light switches.

I think, this is wrong.
Here is the schema

http://www.energeticforum.com/attach...d=128128207 4

Attached Images

index.php.jpg (213.9 KB, 335 views)

that image have very poor quality.. if you can please take a more clean picture!

this might help!

Attached Images

tiger_Kapanadze_sm.jpg (90.2 KB, 433 views)

Have there been any further updates on the replication tests?

hello friends

as you bear the experiment, I've read several threads over several days, and when I reached the end I am left with wanting more information

of all the pictures I've seen this is the most I think, is using sr193

you think that this is the correct one circuit to replicate?


chauuu

Attached Images

index.jpg (242.5 KB, 309 views)

hello friends

please i would like to replicate this circuit sr 193, Could any of you tell me if any replicates, based on this circuit


thanks

Attached Images

index.jpg (242.5 KB, 136 views)

hello friends

I found this video a long time, and I think what needs to be done in the system of Mr. 193, is this the same but electrically, it resembles the 'circuit of Smitty

YouTube - MIT Physics Demo -- Resonant RLC Circuit


chauuuuu

Looks like this circuit: link

Here some more circuits from the same guy: link

There are many circuits around and maybe no one is working

Maybe this video has something to do with it? link

everybody is speculating and come with new theories so it gets even more difficult.

good luck

hello friend scratchrobot

thanks for your answer ', that took time asking and not one answered me

thanks poe over the links sent, I am studying

I posted about the diagram is a user named crazyalex, I write not to confuse the issue more because from what I've seen several threads on sr kapagen and replicas of 193, and others and I slept much the place myself

I think the forum moderator if time should make a compilation of all data in these three thread there on this subject as it is very interesting what I read in this month

thanks again scratchrobot

chauuuuu