Hallo Mikrovolt I see you are online ..

Do you have a link to or from the audio lecture reference a@ 18:10 -
DS mentions Tom Bearden Taping the faster than light field.

Or does somebody else has that link

I am very interested

__________________
 

hi !


here you are the audio file ,

https://energyevo.com/2016/09/03/iw2...dio-recording/


regards

__________________
 

Utopia Now,
A typical Bearden MEG discussion discusses the MEG's application
also can be contrasted to Dollard's application of hybrid telephone lines.

DS application refers to either Baumann or Bearden. audio lecture 18:10 -

Bearden points out that the broken symmetry of a dipole in a generator
is responsible for in rush and not the external field outside the wires.

The Baumann wimshurst hybrid has mechanical input difficult to understand how
it functions because the parts details are withheld. I have not read concept
on Baumann. Not enough information.

in rush from the vacuum

The Tom Bearden Website

__________________
 

The 2 waves are the AC and the Tesla impulse wave. Video of Eric Dollard's understanding of how they mesh together.
in nepers per second represented together on the same graph with the AC wave.
https://youtu.be/GObB67ETvRQ?t=11176
discussion of the hysteresis with convoluted ellipse. Steinmetz wave chart.
https://youtu.be/GObB67ETvRQ?t=10751
The symbolic representation of the impulse is scaled by the log notation (impulse in log scale )
This is where Dollard took it into algebra. This requires understanding rules on how to view in same dimension.

__________________
 

Hallo med.3012 and mikrovolt, Thanks for the very interesting info.

I did not follow or read much on this forum lately.

But my personal ideas is that "it" has also something to do with CW CCW wound coils or bifilar or bucking coils or partnered output coils .. 4 names for something similar.

Probably this is very old news .. but I am interested in this part of the puzzle.
In This Prezi document there is info about it ... specifically about what Don Smith says about it in his video`s and pdf's.

You can click on links or video`s in the document to see mor info.
https://prezi.com/dp7j0ydwqmu-/don-smith-bucking-coil/

Attached Images

Prezi - Don Smith Bucking Coil.jpg (88.8 KB, 21 views)

__________________
 

Hello !


Thank you very much for sharing this ,



regards

__________________
 

Utopia, The cinematic director cut presentation using prezi is interesting.
Because empirical study sometimes allows us to discover principles
of alt energy it is the trail of facts and evidence that has been carefully hidden from public view.
It is the technical trade secrets. When the big corporations hire teams of scientist the most clever teams that money can buy
work so that the truth will never be discovered. It is the failed patent system that causes companies to resort to gangster methods.

The ebooks on this website are really a touchstone to our futile efforts.
In those pdfs are basics that empirical study such as Don Smith projects slowly discover.
It represents countless man hours of experimentation to uncover just a few hidden physics principals
hidden all along as trade secrets for one reason, company survival.

My browser decided to update without permission and it erased weeks of research this week.
The search engines and artificial intelligence work hard at concealing efforts to find answers.

__________________
 

Here Don shows some bifilar or CW CCW way of winding; he says you can drive this Amperage thing with your L1 coil .
And Don says : "It magnifies" https://www.youtube.com/watch?v=Cr07kI7HhzU#t=8471

Here he shows drawings from Tesla patents (CW CCW) and talks about Amperage https://www.youtube.com/watch?v=Cr07kI7HhzU#t=3385

Here he says: There are many ways to wind coils ... with voltage only or very little amperage or you wind them with 100% amperage and very little voltage . https://www.youtube.com/watch?v=J77DMZExsSA#t=387

And here he talks about Tesla coil with Amperage and Voltage ( 2 coils back to back ... Probably cw ccw wound ) https://www.youtube.com/watch?v=Cr07kI7HhzU#t=3891

__________________
 

Here a picture from the Grenade coil from a Kapanadze device ..notice the CW CCW way of winding .
Here a not so good quality video from the device https://www.youtube.com/watch?v=j-NL...rW67hkav4o-0mA

Here a better picture from the Kapanadze Grenade coil (but do`nt read the text from the acompanied post ) Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

Or just remember this from Don ... https://www.youtube.com/watch?v=8DGSdUWP8qM#t=90

Attached Images

Kapanadze coil 101.jpg (71.7 KB, 27 views)

__________________
 

So basically Don said you use bifilar series (?) coil to make pure amperage. Interesting ... very interesting... http://www.linux-host.org/energy/scarter3.gif

__________________
 

Here a picture from Don's Library.
There are different ways to use or combine Clock Wise and Counter Clock Wise wound Coils he said .
I think part of the trick is the Lenz Law effect that is less active in Coils like that.

Then the resonance frequency is much higher ... well at least in the Kapanadze Grenade Coil: for a certain length of wire ... you normaly have a certain resonance freq. but if you wind it CW CCW than you have for the same length a much higher res freq.

I think Tesla said the energy stored in coils like that is much bigger than in normal coils

Well I am here also to learn ..

Attached Images

Don Tesla Center Tap.jpg (62.3 KB, 60 views)

__________________
 

DS refers to patent early cw/ccw figure 2
Tesla patent 336961.JPG

Side note: (ground cable must be 1/4 wave length in patent 685012 logic is same)

For lack of a better representation dynamo of that period here is something close to what Tesla would be modifying for this patent 336961 shown in Utkins pdf below.
This video shows a series wound motor having two cylinder (electric magnets) and a shunt between
https://vimeo.com/1358619

Nikola Tesla 1896 patent 336961 describes 3 brush dynamo regulator which is two brush and a center brush called auxillary brush. Adjustments of these brushes accomplishes control.

There is a step down bifilar shown
http://www.free-energy-info.com/Utkin.htm

__________________
 

he speaks of Voltage and Amperage as if it was some objects that you can get, I Used to believe in all of that..

careful studying and experiments led me to the truth.

sorry to say, most of his concept are 'false', but there is a little bit of truth in most of what he says..

sometimes I think maybe that's just how he perceived it.. or maybe he meant something else..

__________________
 

I understand the angst that people must have when people embark on this road.

1. WE wind coils and expect to have some magic power gain in resonance.
2. WE think CW and CCW matters in gaining resonance.
3. WE continually use closed system but barely get our bulbs to output a fraction of what we've put in.
4. WE Constantly F---- with the exciter side of the equation, when some of D.S. devices have absolutely no resonant coils. When D.S. states all you will get is NEAR UNITY.

After you fail you have some choices:

1. You discover that D.S. is a charlatan
2. you feel D.S. is sincere but misguided
3. You think D.S. was correct but hid the most important piece
4. The D.S. documents are tainted... conspiracy

My thoughts on the matter are: I believe in the sincerity of D.S. period. His insights were just more than good guesses, and he built things the same way. We just never have enough to build the output. So I believe by his design to protect his mechanism to achieve the D.S. effect, he skirted the topic, or by someone's hand do we only see the part that is meaningless.

There are two crucial components that must be present for over unity. Amplification, Feedback. I've seen it happen in audio, where a mic feeds back, if not for the clip protection circuits, would destroy the amps.

Stop messing with the exciter. Build a resonant output with as much RF(scalar)emission as possible. Fold it in on itself so the waves builds and becomes self sustaining. This is done by harvesting the emissions, and firing it back on to itself magnetically. I think this is what Kapanadze does. Obviously you need to sync your fireback to the standing wave to your output coil. In theory if you are able to recharge the capacitor faster than you deplete it... It's no longer an oscillator, it's a constant power source.

This is the road I'm traveling.

__________________
 

Very good road indeed.

__________________
 

I think there is if there is a crucial mechanism being missed. I have searched for it and I am not even sure it exists. I have a video that is now unpublished, and I downloaded it because it showed something strange during your typical "over unity" video.

Take note of the large magnetic field with a trifield meter



I don't have a trifield meter yet... but I do have an app on my phone that can detect magnetic fields... and can be used as a compass. Why don't I see a large shift in magnetic field with my radiating slayer coil? I think because I am not measuring it correctly. An Android app can not compare in any way to an independent device designed for this function. You know a field is there, but is it a magnetic one? It's got to be there. Don said you had to measure the magnetic field correctly.

Is it possible that Don knew his effect could be harvested when the magnetic density increased?

Does anybody have a trifield meter and used it on a Tesla coil?

__________________
 

I just wanted to say I came across a video that shows why I can't see the magnetic field with my android app. The trifield meter discriminates between a stationary magnet and a moving magnetic field.



I guess I gotta get one of these suckers, or use the wire probes that DS uses on his 2001 video. Why does DS have them? It must be something he felt was important.

__________________
 

Someone has already confirmed that rf bubble surrounds these circuits, maybe this is a way to point us in the right direction. If we increase the magnetic density by standing waves, we should get more out then we put in. This may only happen at certain frequencies. Having a tool that lets you know you are tweaking in the right direction may be useful.

Could this be moving field magnetic amplification? The trifield meter jumps around frantically on the receiver, but is less active on the transmitter.



Magnetic amplification produced by scalar transmission?

__________________
 

The study of the electrical field is important in open systems. Requires more of this.
The rate and nature of which the electric cloud vanishes or leaks in most of our experiments we consider not successful.
In reality we are just using the wrong parts, not insulating, not using the right meter, not aware.
The gaseous or fluid state is more intuitive to our senses we developed a dynamo mentality
making us always late to the party however electric fields do have exceptions at times also using the right meter.

Ancient CRT displays of years past required degaussing. It was performed by television
repair men. It involved moving a degaussing coil in a circular motion while moving forward
and then backing up.(like the video meter wagging it's tail) Later televisions used a built in
degauss coil that came on briefly when the CRT is turned on.
The matrix controlling masses comes from the addictive transmission of television.
https://youtu.be/FCcdr4O-3gE

Playing with static fields using a good meter gives feedback to those
that want more than just passing a test. They need hands on technique on a variety of
different electrostatic interactions related to alternative energy. Most physics persons
are happy to get the e-meter out when someone asks. Unfortunately no one usually asks.

Slayer exciter demo shown should be in every classroom.

__________________
 

When I reflect at the numerous people who tried to create Don Smith circuits in the hopes of running their house, and becoming gillion-airs, blindly creating electrical circuits with no goal at all... It's just bad comedy like whacking a golf ball in a sand trap without changing your technique or approach.

The Slayer Exciter is a cheap and non lethal easy win when it comes to building a self tuning resonant circuit; To experience the gain on a TX/RX device. I know there were many people who failed in just creating a working resonant device early in the Zilano days and just gave up or had a HV accident.

I have a 12V slayer exciter that I input 6W and I can illuminate around 10W of LEDs, brightly at full capacity. I can even light a 15W LED fairly brightly. I tune nothing by scope.

What if I folded that RX power(It does not affect Input Power) back to my input and drove a 2nd primary?

I'm seeking ways to multiply my magnetic density, as DS said the electrical side is the wrong rabbit hole, and I need tools to show me I am accomplishing something. I totally agree that the slayer exciter should be taught, however we don't understand it, but when we do... it would rewrite some concepts and laws.

__________________
 

Hello ilandtan!

theoretically the magnetic field don't diminish and move toward great distance , increasing the magnetic field density is a great strategy but we are confined by Lenz's effect which decrease the obtained power dramatically ..

you have an infinite power but the induced magnetic field always oppose the source power which unbalance the system .. in this case the electric current is greatly related with the source voltage..
the interaction remain not far from a closed system .

in my opinion this is why we have to understand the concept of energy balance , in this situation either the electric current or the voltage remain in a well balanced state even when you take power .. it's a kind of system blindness .

Attached Images

Screenshot_2018-05-26_22-17-55.png (259.5 KB, 142 views)

__________________
 

Hi Med,

So please help me out here. I apologize I don't understand the point you are making. I see your picture, and I understand Lenz's law. Can you please expand on your statement?

__________________
 

Hello ilandtan!

i don't know how to explain it ! the key word is the magnetic field , another key is the geometry where we take the power , in other words we need to make a perfect antenna that don't disturb the primary coil .. the primary coil have to be seeing as unloaded coil magnetically

if i find a good example i will put it here , soon

regards

__________________
 

Look no further Med, a Slayer TX/RX will do just that. You can pull the magnetic energy from the receiving coil, and the RX can use a common ground or Earth ground making it totally independent of the primary. You don't have to worry about Lenz's law limiting the primary, because the two are capacitively coupled not inductively coupled. The RX just transforms the energy, and that's why it doesn't produce a field that destroys it's own resonance. I think it's possible to run a multi primary slayer with one primary being driven by the energy harvested from the secondary. Multi primary slayers use a common L2 coil, and that's how they increase the slayer output.

I think geometry is not important as long as you are within the scalar field between primary and secondary. I also suspect geometry is important as Tesla says in terms of the transmission system, to take advantage of the telluric echo.

__________________
 

Hi !

in your above example your input is 6W and you can illuminate around 10W, say we want 600 W output , if the relation is proportional we need 360 W input , in my opinion 360 W is a high input power and we may have a problem running the slayer exciter in such power level .

what i want to say is we need the perfect antenna to harvest the power , Don Smith system is based on a special antenna that make it possible to run in a low power level but able to catch hundred if not thousand of watts ..

Lenz effect is a permanent problem since we use coil, the scalar field must be compressed again in our wires .. in my opinion this what limit our choice .

regards

__________________
 

I purposely maintain a 12 V source, because I want to limit the lethal nature of these circuits. I want to have a definitive result. D.S. claimed the use of small 12V batteries to drive his generators.

I think that you cheat Lenz effect by keeping the the current low. Low current creates proportionally low magnetic counter force, that's why we use HV at resonance, HF for transmission, Scalar transmission to reduce absorption and deflection. Then you use diodes to return the energy back to usable DC you can store. My theory anyways...

Pardon my asking Med, you're "perfect antenna" doesn't happen to be in the shape of an EBTC?

__________________
 

Most successful experiments was done in HV using a spark gap discharge ; time to time i use low voltage to study profoundly what's going on so i can make a big step toward HV experiment, still working on the compacted Tesla wireless power transmitter :




some strange results was obtained recently show the importance of energy balance concept , the ETBC if used as an antenna is very sensible to the position /geometry of the primary coil and act in a very different way if something is changed, the use of conducting surface make it perfect as an antenna but nothing important to share until now .

__________________
 

Spark Gap induced resonance is a much harder to achieve, and to produce constant output(without kill you potentials). That's why it lends itself more to accumulated discharge like a classic Tesla coil spark show. And no one can use a flashing bulb... unless it's on top of a cop car. I honestly think it's another pitfall of why people ended up giving up, this quest.


If I may provide a suggestion for you med, in your goal for the TX/RX EBTC. Use this concept for the TX, it should have the same advantage, low voltage, self adjusting resonance.



What DS said about near unity in resonance is true from my experiments. You don't start doing anything cool until you work on the RX side.

__________________
 

@ilandtan



Thank you for the video, it show another way to oscillate the bifilar coil , the idea is interesting

__________________
 

This picture is inaccurate. Once you transmitter is broadcasting, even a nearby pipe can harvest the energy. My RX/TX slayer are wound both the same way. We need to peel the BS and rattle shaking to experimentation.

However Helical coil direction does matter when you set up your transmitter. I had two primaries, both wound with the same diameter just in different directions. No matter how I tried to get one to work, I couldn't produce the same power with the other. My L2's are wound CW, my primary worked the best CCW

__________________