That was unexpected.... (Magnacoaster)

janost · #**211** (**permalink**) 05-25-2012, 05:42 PM

Quote:

Originally Posted by penno64

Hey Janost,
Regards, Penno

Actually my name is Jan.

Janost is the Nick I use on the internet.
It´s a combination of my first and last name.

Guruji · #**212** (**permalink**) 05-25-2012, 07:14 PM

Quote:

Originally Posted by janost

This is not a hoax and it actually works and this is how it works:

It is a Magnetic Resonant Oscillator i.e oscillates a magnetic field at resonance.

The two opposing magnets are like if you would load 2 springs against each other, pulling or pushing with equal force.

If you pull or push in at the center connection between the springs it will load one way and when you let go the try to return to the center of equal force.

But as nature is not digital it will not stop at the center but will overshoot a couple of times before settling and you have oscillations like a coil ringdown but with a magnetic field instead.

As the coil is situated inbetween the magnets it will be able to shift the magnetic field in either direction and "load the springs"

When it releases, the magnetic field rings down and as the coil is in this magnetic field it will generate several CEMF kickbacks.

It it is very sensitive to how hard you tension the magnetic field and how much power you put into the coil charging it.

Can this be experimented on a Bedini solid state? What amperage are you inputting when adjusting the magnets?
Thanks for sharing

janost · #**213** (**permalink**) 05-25-2012, 08:16 PM

Quote:

Originally Posted by Guruji

Can this be experimented on a Bedini solid state? What amperage are you inputting when adjusting the magnets?
Thanks for sharing

At the moment it is only to get a grip of the technology.
It is however an inspiering technology.

I am also one of those who speak for to measure the current in all circuits.

penno64 · #**214** (**permalink**) 05-26-2012, 05:39 AM

Hi Jan,

Thank you for the hints.

I will setup an oscilator to pulse the coil instead of the current arrangement,
that is using a trigger winding from the same coil.

These are simply pinball machine coils for flippers etc. They have a heavy gauge
for the main coil and a finer gauge for the hold coil. I was using the finer wire
to trigger the NPN transistor - nothing special. Base was damped via a 1.5k
resistor.

Regards, Penno

superdude · #**215** (**permalink**) 06-04-2012, 02:31 PM

So why has he been taking orders for 3 or 4 years, with 50% deposit and hasn't even gone into production yet??

janost · #**216** (**permalink**) 06-06-2012, 10:18 PM

Quote:

Originally Posted by superdude

So why has he been taking orders for 3 or 4 years, with 50% deposit and hasn't even gone into production yet??

I dont know if you have paid for his stuff but he wants to make money to fund his prototyping.

The solution has losts of problems at the energylevels specified.
The magneticfield generated at high energy troughputs are huge and can be dangerous.
Its like having a nuclear energyplant in your basement without shielding.

There is no way he can put this on the market without solving those problems.

wrtner · #**217** (**permalink**) 06-08-2012, 03:01 PM

Quote:

Originally Posted by janost

Its like having a nuclear energyplant in your basement without shielding.

No, it isn't.

Ein~+ein · #**218** (**permalink**) 12-24-2012, 05:25 AM

Christmas is here once again and Magnacoaster customers can deservedly look forward to receiving another lump of coal. Fools and their money are easily parted. They obviously mistook the dragon's handshake with Richard on a $1 million deal as substantiating Willis's claims without listening to the dragon's condition. Strange how Richard didn't take such an opportunity to demonstrate his device on national TV even through video clips. Even his appearance discredited him. If Willis's victims had half a brain, they would've taken him to court years ago.

That doesn't discount the possibility of his technology but what's the closest anyone's come close to replicating a safe and marketable free energy device?

Allcanadian · #**219** (**permalink**) 12-25-2012, 03:40 AM

@Ein~+ein

Quote:

That doesn't discount the possibility of his technology but what's the closest anyone's come close to replicating a safe and marketable free energy device?

That is the question isn't it?, there have been many inventors such as T.H.Moray, Victor Schauberger or Lester.J.Hendershot who had demonstrable devices. The devices were tested by credible sources, inspected by credible sources and then they disappeared into thin air, why?. If you have done your homework you would find every single one would not share their secret with anyone, they expected the world for their technology and all took their secret to their grave with them.

I have spoken with Mr.Willis and I expect his case will be no different because they are their own worst enemy. We need no conspiracies, no men in black because they are the enemy, their ego. The story of Mr.Willis will most likely be the same as those mentioned above, different name same story repeating throughout our history.

I could be wrong but I believe he has neither the conviction nor the integrity to make a difference. He is not the one, the one we seek will give their dreams freely to the world in hopes of making it a better place. They will sacrifice nothing to anyone as their dream was never one of untold riches, power nor fame it is to make everyone's lives better without the expectation of equal compensation.

The question we should be asking is what do we have without compassion and respect for our fellow man, without integrity?, I submit nothing.

Merry Christmas and a Happy New Year to everyone.
AC

Dave45 · #**220** (**permalink**) 12-25-2012, 04:08 PM

Quote:

Originally Posted by Allcanadian

@Ein~+ein

That is the question isn't it?, there have been many inventors such as T.H.Moray, Victor Schauberger or Lester.J.Hendershot who had demonstrable devices. The devices were tested by credible sources, inspected by credible sources and then they disappeared into thin air, why?. If you have done your homework you would find every single one would not share their secret with anyone, they expected the world for their technology and all took their secret to their grave with them.

I have spoken with Mr.Willis and I expect his case will be no different because they are their own worst enemy. We need no conspiracies, no men in black because they are the enemy, their ego. The story of Mr.Willis will most likely be the same as those mentioned above, different name same story repeating throughout our history.

I could be wrong but I believe he has neither the conviction nor the integrity to make a difference. He is not the one, the one we seek will give their dreams freely to the world in hopes of making it a better place. They will sacrifice nothing to anyone as their dream was never one of untold riches, power nor fame it is to make everyone's lives better without the expectation of equal compensation.

The question we should be asking is what do we have without compassion and respect for our fellow man, without integrity?, I submit nothing.

Merry Christmas and a Happy New Year to everyone.
AC

Agreed
greed
greed
greed
the American dream

Ein~+ein · #**221** (**permalink**) 12-27-2012, 02:57 AM

FOUND IT!!! An overunity device for sale!

Along with the device's housing, their business practice appears equally transparent. Although, they're currently out of stock, the website clearly states they won't take backorders until "a unit becomes available for immediate shipping". And there's also a 100+ member website user forum:

Quanta Charger Parts Kit

--------------
WAIT, here's another:

Unification Coil by 1StopEnergies - The Unification Coil was invented and created by Daniel & Erica Nunez of Bronx, NY. It combines the work of Marco Rodin's "Rodin Coil" and Randy Powell's "Abha Coil". They posted a video on Wednesday claiming over 450% overunity as measured by multimeters, powering a bank of LED lights. An electromagnetic field emanates at least 20 feet from the small coil.

Directory:Unification Coil by 1StopEnergies - PESWiki

Ein~+ein · #**222** (**permalink**) 12-27-2012, 03:09 AM

FOUND IT!!! An overunity device for sale!

Along with the device's housing, their business practice appears equally transparent. Although, they're currently out of stock, the website clearly states they won't take backorders until "a unit becomes available for immediate shipping". And there's also a 100+ member website user forum:

Quanta Charger Parts Kit

--------------
WAIT, here's another:

Unification Coil by 1StopEnergies - The Unification Coil was invented and created by Daniel & Erica Nunez of Bronx, NY. It combines the work of Marco Rodin's "Rodin Coil" and Randy Powell's "Abha Coil". They posted a video on Wednesday claiming over 450% overunity as measured by multimeters, powering a bank of LED lights. An electromagnetic field emanates at least 20 feet from the small coil.

Directory:Unification Coil by 1StopEnergies - PESWiki

BTW, I got these from LinkedIN's 'Free Energy' Group
---
For the scores of Mayans who perished last week, RIP. [smilie]

Farmhand · #**223** (**permalink**) 12-27-2012, 03:47 AM

Unification coil guy is measuring voltage spikes x current spikes for the output.
No scope shot of the output is a dead give away it's a false or mistaken claim.

The quanta charger was running with no output ,a demonstration claiming this
and that with the setup running with zero output is less than a demo to me.

It's an attempt to convince without any proof.

Both are dubious at best and I wouldn't touch either without wore evidence.
Evidence in the way of scope shots and proper power determinations.

Both demos reek of deception to me.

Cheers