One of these days I want to try using my SS oscillator trough a transformer, to drive my ign coils. Should work, since the DC is pulsing.(pump the juice through it backwards....to step up)

A 24 volt doorbell trany should give a 5 to 1 boost for starters.
Centre taped 12 volt trany's out half wave rectified units would work, too.

Feel free to beat me to it (so many circuits, so little time)


Carl

Bodkins,

I think you are getting that effect because you haven't paid your Free Energy Bill

Carl

i have ordered 2x 8" stainless steel spheres from the USA. Hopefully they will arrive next week. Will either paint them or varnish them. Haven't decided yet.

Not sure about the mixing bowls...it would probably work....but there is only one way to find out.

bodkins,

thats the positive energy running the bulb....if you use a neon it should work also. You are getting positive energy from your insulated rod.

nat

also about spheres....think of the sun as being a radiator and is it also an absorber as well?.....perhaps a hollow insulated metal sphere resonates better with what the sun is doing.....a possible theory....who knows.

or perhaps it (the sphere) behaves as the sun does...radiating and absorbing at the same time...another theory

Bodkins was right... another Sherlock Holmes!

Well done 'Inspector Nat' and everyone working on this forum.

Together you are all supporting each other and bouncing ideas between you that are pushing you all forward with great speed.

What a great example of experimentation, observation and thoroughly GOOD research Nat, you deserve to reach goals others believe impossible! You really do have the ability to uncover 'hidden secrets' that other 'researchers' just can't see.

*Imhotep*, Shiva and Peter Lindemann, were instrumental in bringing a simple device forward that has enabled most of us the opportunity to experiment at home in a most exciting way, and share the discoveries with other keen and helpful friends and I thank them ;-)

~~~
To encourage other experimenters to get involved in this forum who may not feel 'qualified' or sufficiently 'trained', I'd like to relate a reply that John Bedini made to a sceptic who could not accept John's claims, as he was not able to measure the 'Radiant Energy' with a meter...


"This Radiant Reactive power WILL charge batteries, light light-bulbs and other things but it DOES NOT meter as REAL POWER.

This is why your math is useless! So please, quit quoting your theories and analyses to me.

My light-bulbs are on. Are yours?"
~~~~~~~~~~~~~~~~~~~~~~~~
Date: Thu, 21 Oct 2004 19:14:28

I think John explains the position very clearly!

I did more experimenting with the earth ground and antenna idea. I found out that there was LOTS of electricity flying around the house but not the way I expected. It looks like AC to me. I went to a bridge rectifier and captured a glimpse of it on a volt meter. The CFL units that I have built emit / transmit a bunch of electricity. How to captue it correctly is the question. Here is the video of the experiment:
YouTube - Electricity In The Air!!!---Strange Findings

Lidmotor

Lidmotor:

What a great find! The coil inside your box induced the moving energy or energy atoms surrounding it and your aluminum plate antenna which is also an insulated material acts as a capacitor and captures the energy. This is my thinking. Wow 32.2 volts ac. we need large capacitor to store this energy. Another modification of capturing energy in conjunction with the earth grounding system. another sleepless nights Bodkins

Thanks a lot Lidmotor for sharing your findings. I was waiting for something like this. Imagine group of coils using the lowest energy inputs and capturing back what you have just shown on your video and amplifying these voltages for numerous uses.

And also, as always as i observed that, resonance plays an important role here as different materials have different resonant effects as they are introduced into the circuit, as they are being accomodated into "the community".

Links nat !!!!!for the spheres!!!
i dont understand what you use to trigger the coils SCR 800volt what triggers this???

8" TESLA COIL VAN DE GRAFF SPHERE DISCHARGE STEEL BALL - eBay (item 380068722302 end time Oct-29-08 20:32:30 PDT)

the neon bulb has a trigger point of about 90volts depending which one you have bought...when combined with the scr ....this then becomes a switch....all that is required is to wire it as per my circuit i posted earlier

Thanks byjoveoldchap

Only by working as a team will we develop this system to something that will benefit everyone.

It has been a real privilege working and brain storming with everyone on this forum. We are all realising a dream right now.

Keep up the great work team. Keep thinking outside of the box as we have more work to do on this system.

Nat

Great demo showing the electric smog we all live in! Just imagine if we could somehow collect all this stray radiated EMI and re-use the energy.

If we were living in a world where the power grid was wireless, Tesla fashion, just imagine the opportunities for robbing the power companies by tapping free energy!

Hoppy

Errr... excuse me 'GENTS'...

but you may find a suitable SPHERE much closer than you think...




~~~
Need any help?
Its a ball valve assembly, commonly used in ladies and 'gents' toilet cisterns and cold mains storage/supply/central heating expansion tanks... [check the loft] you only need the 7" copper float ;-)

Lidmotor, Bodkins, Nat and all you other great experimenters.

This may help as a guide in your experiments, but as John Bedini says, PLEASE Be VERY careful.
~~~

"... At a conference in 1999 I remember seeing data showing there is a constant return current flowing from all over the earth back into the sky resulting from lightning strikes hitting the earth.

This current is very, very, small --- around 10-12 amps per square meter and varies slightly depending on temperature and wind conditions.

The measured potential was 100 volts per meter as I remember,

I would think a 300' conductive antenna transmission line would make a really big difference. Also, a vertical arrangement would make more sense than a horizontal one.

To All,
Lets make this much simpler then it is, and no one will get hurt doing the experiment.

Just put up your 200 ft of coax 40 feet high supported between two fiber glass poles, this should give 1000 volts potential charge.

Next take an SCR 800 volts, leave the high voltage capacitor where it is connected, now face the SCR cathode towards the positive pole of the battery and ground the negative side of the battery with an 8 ft ground.

Connect a neon bulb between the anode and the gate, at 90 volts the neon will fire and the battery will get a "real radiant charge" (Conversion is backwards from electrostatic to radiant should see saw tooth wave, much stronger).

The faster you fire this bulb the better the battery will charge.

It's important to leave the .00047 uf 5000 volt capacitor between the cable or connected to the anode and ground, it's important to use a capacitor something like mica or a glass tinfoil capacitor. If looking at it with a scope be careful just look between anode and cathode.

Please be very careful with this experiment."

John Bedini
~~~

read the full description here:
it is titled "X123 Sends Message --- John34" about 2/3rds down the page.
John C. Bedini: Back EMF Motor / Generator / Battery Charger

"Just put up your 200 ft of coax 40 feet high..."
Lidmotor: how high is your yacht mast? ;-)

byjoveoldchap:

Thanks for this important information. I always admire your inputs in this forum.

Hoppy, byjove, Nat, and Bodkins,

Gotoluc sent me this video of a guy who is working on a similar project. Luc tells me that the guy will soon be posting results of a device to capture the energy coming off high power electric lines. Byjove-- my sailboat mast is about 40 ft. tall but aluminum and not a good choice for the Bedini experiment. Hoppy I am going to try to capture that 32 volts into a cap and maybe feed it back into my lunch box. A free lunch for the lunch box? I'm wondering if I can use Nat's and Bodkin's SCR idea somehow.

Here is the video that gotluc sent me:

YouTube - Free Energy " One of a Kind Device "

Cheers,

Lidmotor

@byjoveoldchap
You made me a secret toilet checker!!!!!
Great idea will get one and try it out.
it should work with my setup

SET OF 2 STAINLESS STEEL GARDEN SPHERES RRP £35.99 !! on eBay, also Water Features, Ponds Water Features, Garden Plants, Home Garden (end time 15-Nov-08 07:25:12 GMT)

YouTube - Free energy test at home.

Interesting what this guy is finding...

I captured the energy coming off the top of my Lunch Box Lite today and put it in a cap. I used the Earth ground with the pie pan antenna sitting right on top of the box---and it worked---over 100 volts came out !!! Right through the plastic lid. I then took a neon bulb and used it as a pulser and that also worked. Now the question is how do I get the escaped juice back into the box where it came from.
Any ideas?
Here is the Vid:
YouTube - Escaping Electricity -- CAUGHT !!!

Cheers,
Lidmotor

Could you line the inside of the box with aluminium foil? then use a 3 prong plug to goto ground that way?

Just a thought.

theremart:

Thanks a lot for the link of the video. Very interesting indeed. I have this actually on my notes but I was thinking of using a kind of a yagi antenna which is far more expensive than what is on that video. I think this can even be tuned-up to maximum resonance depending on the material used in capturing the "leakage".

Lidmotor:

Thanks also for sharing all your findings.

To all the Experimenters:

Thank you all. I have found a paradise here. I see a very bright future for the next generation to come with the kind of people you are, sharing and inspiring others of what good we can do to this one common planet we all have. Thanks everyone and don't forget to sleep too

well done lidmotor!!!

Cooooolllllll Lidmotor
All@ist great to be part of something bigger than the self!!!!
And i sleep like a bady now!
Quote
question is how do I get the escaped juice back into the box where it came from.
Any ideas?
Bridge Rec. to
+ and - ignition coil?
+ and - primary battery?

watch the video again the ampdraw hardly moves when you switch the light on!!!
Peter was Right!

Hello all I am new to this and i will post pics and try a vid latter . Think i should start to tell u how i am set up. Bedini multi-coils . 3 transistors ..the transistors are wired for 4 but only useing 3 ..the 4th place is to try things . the Bedini coils are 2 bifilar coils .1 coil to the 1st transistors.2nd coil all power. to transistors 2 and 3.
The ignition coil is wired as followed in to the Bedini multi-coils set up... + goes to the collector on the 3rd transistor.. the - is going to the - of the charge battery. the power or middle of ignition coil going to the CFL the other wire from CFL to the negative to the emitter side of primary battery . 2nd CFL useing 1 wire ... from the first CFL power or middle of ignition coil .the other to stainless mixing bowls two of them two make a sphere .14 inch. I am allso seeing AC every were. u will find u can see it allso on your digital multimeter useing 1 prob . single wire transmission . seams what ever is connected in shows this . even the batterys . AC . try even a battery not in the cuircit from your stainless sphere one wire . will become part of it now .. looks like this will keep growing. if we knew more about this we could link all are setups together A big thx to all hope this helps out and sorry if i use worng terms for things

Hi carmine
Looks like your up to speed to me!
cant wait to see the pics and video dont forget a setup drawing
Aboard

Carmine, glad you came in to join us

Your amazing Lidmotor!

I hope you're keeping notes, because I can see a book coming out very soon

"How I Packed A Free Lunch Into My Lunchbox" by 'Liddy the Wizard'

Well done!

[quote=byjoveoldchap;31070]Your amazing Lidmotor!

I hope you're keeping notes, because I can see a book coming out very soon

"How I Packed A Free Lunch Into My Lunchbox" by 'Liddy the Wizard'

Well done![/QUOTE

No book in sight but there is a can of worms that I am into. This radiant energy thing is wiggling around in my hands and I'm trying my best to understand it and get it on the hook. When that neon bulb lit up yesterday and started blinking that was the first time that I really saw it. Now that I have the worm in my hands the question is what to do with it. Peter--You probably understand all of this but to me it's like Christmas morning. New toy!!
Thank you to everyone here for the support and to everybody new and old --- KEEP WORKNG. I think that alot of people are watching us. Look at the thread views counter.

Lidmotor