Energetic Forum  
Facebook Twitter Google+ Pinterest LinkedIn Delicious Digg Reddit WordPress StumbleUpon Tumblr Translate Addthis Aaron Murakami YouTube REGISTER NOW*** 2018 ENERGY CONFERENCE ***


Monero XMR


Go Back   Energetic Forum > >
   

Renewable Energy Discussion on various alternative energy, renewable energy, & free energy technologies. Also any discussion about the environment, global warming, and other related topics are welcome here.

* NEW * BEDINI RPX BOOK & DVD SET: BEDINI RPX

Reply
 
Thread Tools
  #31  
Old 05-07-2017, 10:11 PM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
Quote:
Originally Posted by Allen Burgess View Post
I am testing the magnet spin lift by toppling the field axis end over end with a diametric tube magnet glued sideways to the axle of a synchronous wash tube pump motor; As Jerry Bayles does with his axial polarized disc. The field spirals outward along the "A" vector.

The "A" vector in this schematic below, is in the center of the poles along the axis of symmetry. The schematic makes it clear that the "A" vector is the portion of the magnetic field that is PROJECTING AWAY from the source!

You're on target thinking wise based on more recent discoveries of additional information that I located in the last 2 days.
Anyone following this thread should be advised to also follow Allen's thread on the dollar store flying saucer challenge!


Gadgetmall Coanda OU UFO.

This image is posted on his thread as well. It's from edav

“Eizelement” is not the full word but in German this stands for “Magnets”
You should be seeing at least half of a dual sheathed tornado in cross section with this image from Victor Schaubergers' Repulsin design.

For those who care, the fine folks at Ultralight America did some significant work on "Spin Wave Repulsin Technology” pioneered by Victor Schauberger.
From the first page in their investigation in to creating an Electro Dynamic Air Vehicle - EDAV

The EDAV is an Electro-Aero-Dynamic vehicle and uses two effects:
1.) The Coanda Effect, a pure aerodynamic effect based on the Bernoulli’s principal.
2.) The Electro Dynamic Effect: The high speed vortex in the vortex chamber produces an electric charges separation effect called “The Diamagnetic Effect”.

Start Here: edav

*Note: This is a Superior Piece of Investigative Research. Well worth anyone's time in my opinion. I am not going to try to replicate here what has been already accomplished and by people whom understand aerodynamics expertly, and who've gone much further with filling in a complete understanding of what Victor Schauberger's Repulsin is about.


"A lot of individuals have written concerning the design of the waveplates and Part 3 discusses the design with much detail. But I will include the following writings from Victor’s book to again verify the design. As the pages of the book show designs of waveplates, certain individuals who have no understanding of physics follow the saying “Monkey See, Monkey Do”. So if you build your waveplates like the ones shown in the book, then your doing exactly what others want you to do and your achievements will be a waste of time and money. The U.S Navy would never have let those pictures of the implosion motor be taken if the motor really worked. That particular motor was in the junk pile in Prague, left by the Russians. They got there first and had removed all pertinent data and information associated with the Implosion motor developments. Design and build by the information that has been given in my writings and your results will be fruitful."
edav

NOW...L00K Here..***Blink...blink...

https://www.vasantcorporation.com/index.php
Find Articles in the header at the link.

Spin Wave Technology for Mag Lev's.
https://www.vasantcorporation.com/do...levitation.pdf

Power Point
https://www.vasantcorporation.com/ooswt/ooswt01.html

If you are a Rich person I may forgive you, but only so long as you buy their book, and then copy it for sharing. $490.00 from Jeff at Amazon: More money, more money, more money...Oink!
Attached Images
File Type: png Hanabau Mk 3-Enhanced-XZA-1.png (1.45 MB, 8 views)
__________________
 

Last edited by Gambeir; 05-07-2017 at 10:34 PM.
Reply With Quote
Sponsored Links

Download SOLAR SECRETS by Peter Lindemann
Free - Get it now: Solar Secrets

  #32  
Old 05-08-2017, 06:36 PM
ET-Power's Avatar
ET-Power ET-Power is offline
Senior Member
 
Join Date: Feb 2017
Location: Republic of California
Posts: 101
Quote:
Originally Posted by Gambeir View Post
Slightly revised- trying to make it more readable

Thanks ET Power. Not to take anything away from Otis or Hamel, because it's clear that there is a foundation behind those machines, and some of which may perhaps be seen in the ARV in the form of the pie shape of the capacitors.

I've thought about some of the relationships of these and other ideas myself. Energy is concentrated at a point where the anther spin inwards towards matter in a decreasing spiral increases the acceleration which should then have a gravitational effect, or so it seems to me, and ideas like those which spring from people like Walter Russell were likely not unknown to the people that built the ARV and there is one interesting thing to note. Russell thought that gravity was the point of intersection of radiant light. So looking at those pie shapes, the way the machine appears, is as a kind of focused energy beam, and which comes to a point, and the fact that there is likely a magnetic field being applied in a spinning orbital plane at 90 degrees to a vertical electromagnetic power flow; well it sort of looks like a model of earth or something similar, and I could be all wrong with what I've thought and said previously.

What we do know is that crystals/quartz is a driving force. This is about as well established as we can expect right now, but all parts are related, and it might well be I am only still seeing part of the motor system. In other words, the ideas of Walter Russel, Hamel, and others may well be incorporated in to the thoughts that went into designing the ARV. Some of them seem to be, but we do know that a vibrational fluxing of the crystalline material is a part of this system, or any other crystalline capacitor, for there is no other reason why it would have to specifically be a quartz crystal that I can think of.

This would follow very conventional ideas about engineering the vacuum of space. See this.
ADVANCED SPACE PROPULSION BASED
ON VACUUM (SPACETIME METRIC) ENGINEERING
https://arxiv.org/ftp/arxiv/papers/1204/1204.2184.pdf
https://arxiv.org/abs/1204.2184


I've watched John Iwaszkos' video on this while taking notes and while stopping the video to draw out what he is showing. I think this is about the clearest understanding I've seen and with a physical demonstration. Just realize he's just using a piece of quartz and not a quartz capacitor.
https://www.youtube.com/watch?v=kIcq6QEJ2os

So the idea here is we/us/me, well at I am pretty confident that the base of this machine is series of 48 pie shaped quartz capacitors as described previously. We think that the pie capacitors fire off at high speeds in counter opposing manner so as to balance the machine with their thrust. They may also be driven in a cyclical or cycloid like manner, and at high speed, thus forming a vortex of pulsations. Reason being there is a probability of chance that there is a relationship to microwave/radar technology involved, and which may become more clear later on.

Many, many, times I've thought that I've gotten this thing figured out only to discover more and more information. We have to realize that even though this machine maybe 50, 60, or even more years old, it's still a machine which was created by brilliant insightful people.

Right now I'm looking for more information on EHD's (*Electro hydrodynamic generators) and also MAP's (*Maneto Plasma Dynamic Generators). I can speculate on the collection process but it's very thin ice. Normally I like to have a reasonable amount of support to my ideas, but here I'm lacking and in the process of discovery.

Speculation

Notice that in many UFO photos and video's there are areas where there appears to be kind of screening, or a part that seems to resemble a radiator or speaker cover. Something along those lines. In old machines like the ARV this has to do with the power system; the collection of ions from the surrounding environment. The environment is the fuel tank for the center column in my opinion. In newer machines it may have to do with creating a plasma shield.

Right now I think that there is a super-conductive magnet or magnetic cables which, so long as the coolant lasts, is a part of a vacuuming system which collects ions from the environment.

*However this is a big if. I have a lot to learn here and am still researching. It's unclear right now if this proposed vacuuming system involves the silvery grey like disk (*See the sketch I provided) and that disk is located beneath the pilots seats in the ARV drawing by McCandlish, but it could be a a type of super conductive/magnetic accretion disk. The disk would draw in ions which would then be feed to the tornado vortex for separation.

Adding a electron to an uncharged atom makes a negatively charged ion, and removing an electron from an ion makes a positively charged atom. This is the purpose of EHD Tornado in the center column. It takes raw material, which is the surrounding environment, and using the vortex of a tornado it creates the potential for exploitation of these actions. Also note that John Iwaszko tells us that the hull shape is an important part of the capacitor drive, and even though it may not itself be part of the pie capacitors in the ARV design, at least as far we know right now, the preferred shape is that of a classic saucer, with the exterior of the hull carrying a positive charge and would then be a force multiplier.
Sorry I've been away for a week or so...

THANK YOU FOR THIS!!!!

TRULY APPRECIATE all of your shared work/research & insights!

Enjoy!
__________________
"Rebellion to tyrants is obedience to God." - Benjamin Franklin + Thomas Jefferson
Reply With Quote
  #33  
Old 05-08-2017, 06:43 PM
ET-Power's Avatar
ET-Power ET-Power is offline
Senior Member
 
Join Date: Feb 2017
Location: Republic of California
Posts: 101
Quote:
Originally Posted by Allen Burgess View Post
@Gambeir,

Take a look at this "Plasma Loop" video by George Chaniotakis:

https://www.youtube.com/watch?v=czI-wvjLork
THANK YOU! Very cool!

Everything is frequency
__________________
"Rebellion to tyrants is obedience to God." - Benjamin Franklin + Thomas Jefferson
Reply With Quote
  #34  
Old 05-08-2017, 06:50 PM
ET-Power's Avatar
ET-Power ET-Power is offline
Senior Member
 
Join Date: Feb 2017
Location: Republic of California
Posts: 101
Lol

Quote:
Originally Posted by gambeir View Post
no there's nothing wrong with humans. You have a distorted understanding if you believe that what's wrong in the world is the result of humanity instead of the result of perverted mental defectives, 99% of whom now account for nearly half the global wealth but whom number no more than a few hundred people. Like ya know, gates says he's trying to give his fortune away. Really, well let me help because i'm pretty sure that i can solve that problem and the world will be a hell of a lot better off without him and his friends hording half the monetary wealth while trying to accumulate more.

You want to help solve humanities problems, then feel free to deliver a thermonuclear device to the next bilderberg meeting or the davo's bankster ball in switzerland next time; that ought to solve about 90% of the global problems in one feel swoop. Right now i'm busy trying to help people look at a 70 year old flying machine with more open eyes so that they realize just how badly those other people are screwing all the rest of us while parading around like they were some kind of kings instead of the criminals that we should see them as.
you tell those crooked elite!
__________________
"Rebellion to tyrants is obedience to God." - Benjamin Franklin + Thomas Jefferson
Reply With Quote
  #35  
Old 05-09-2017, 02:04 AM
mainsen mainsen is offline
Member
 
Join Date: Feb 2012
Posts: 35
Quote:
Originally Posted by Gambeir View Post
“Eizelement” is not the full word but in German this stands for “Magnets”
Hi,
no this stands not for magnets. Its probably "Heizelement" which means heating device/part

regards
__________________
 
Reply With Quote
  #36  
Old 05-09-2017, 11:48 AM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
Quote:
Originally Posted by mainsen View Post
Hi,
no this stands not for magnets. Its probably "Heizelement" which means heating device/part

regards
Thanks, every little bit helps: I used what the folks over on Ultralight America had for an interpretation. Wonder how he ended up with that?

Google Translate does show "Heating Element." I didn't bother checking the translation and now that I have I don't see any remote way this
ends up being magnet or magnetic. Very Odd to have one come up with magnetic vers heating element? He said it doesn't exactly mean
magnetic but how exactly you end up taking a heating element and turning that in to a magnet with a word translation is hard to see.

I did think about verifying the translation but passed it off as improbable that the author would be far off.

Weird?
__________________
 

Last edited by Gambeir; 05-09-2017 at 11:51 AM.
Reply With Quote
  #37  
Old 05-12-2017, 01:48 PM
Allen Burgess Allen Burgess is online now
Gold Member
 
Join Date: Sep 2011
Posts: 1,461
Spinning a neo sphere on it's polar axis.

My wash tub pump motor is apparently running at too low an R.P.M. to generate a detectable "Magnet Wind". Here's a possible alternative approach with higher speed potential. TK's "A" vector would expand to the side.


https://www.youtube.com/watch?v=kh90PmyvpnI


TinselKoala2 years ago

Nope. It's the degaussing coil from an old monitor, and it's driven by a symmetrical square wave from the FG at about 40 Hz. The "secret" is in the orientation of the coil.
__________________
 

Last edited by Allen Burgess; 05-12-2017 at 01:54 PM.
Reply With Quote
  #38  
Old 05-12-2017, 03:20 PM
Allen Burgess Allen Burgess is online now
Gold Member
 
Join Date: Sep 2011
Posts: 1,461
Pyrolytic air jet levitator'

Here's what appears to be an even better way to spiral the "A" vector at high speed:


https://www.youtube.com/watch?v=ZMtl8-WOPYo
__________________
 
Reply With Quote
  #39  
Old 05-18-2017, 03:26 PM
Allen Burgess Allen Burgess is online now
Gold Member
 
Join Date: Sep 2011
Posts: 1,461
Tr-3b

Take a look at this patent. Vortexing magnetic field on the horizontal plane:

Link to "Rotating Electrostatic Propulsion System":

https://www.google.com/patents/US200...wcAKQQ6AEIWDAH

BRIEF SUMMARY OF THE INVENTION

[0001]

The invention, which is the object of my present application, is a spacecraft propulsion system which develops a spacetime curvature tension utilizing a combination of a rotating radial electrostatic field and a fixed vertical electrostatic field. The two fields create a stress-energy Tzr gradient in the radially direction which is equal to force. The radial field is created on the side of a charged rotating cylinder on the underside of the hull. The vertical field is created by an annular charged ring concentric with the cylinder. Three rotating cylinders are located in a triangle on the bottom of the hull in order to produce a force in any direction in the horizontal plane.
__________________
 

Last edited by Allen Burgess; 06-12-2017 at 02:39 PM.
Reply With Quote
  #40  
Old 05-18-2017, 04:18 PM
Allen Burgess Allen Burgess is online now
Gold Member
 
Join Date: Sep 2011
Posts: 1,461
Magnetic vortex generator

@Gambeir,

Here it is, your tornado theory at work:

BACKGROUND OF THE INVENTION

[0002]

The idea for this coil configuration comes from the observation of powerful thunderstorms, as described by physicist Dr. Richard Feynman in his Lectures on Physics, a copy of which is enclosed as a reference. Upon reading his explanation, I realized that the thunderstorm is actually a hyperspace physics phenomenon.


[0003]

After the passage of a large lightning storm, people have observed that a car tire rim has merged with the trunk of a tree growing in the ground. Due to the large branches of the tree, there is no possible way that it could slide down the branches and around the trunk. It was observed also that a straw of wheat became embedded in the hard wood of a telephone pole. It turns out that the thunderstorm offers an explanation as to how this can occur.


[0004]

After reading Feynman's explanation, it can be seen that the key to this phenomenon is that there is a downward and an upward lightning bolt, sometimes occurring together if the leader branches into two paths. Bolts of lightning also like to strike tall objects such as telephone poles or trees. Now an electrical current moving downward produces a clockwise magnetic B field, as seen from above. On the return stroke, the current is moving upward which produces a counterclockwise magnetic B field. Thus the thunderstorm produces two huge bucking magnetic B fields which is the magnetic geometry of this magnetic vortex generator. Using my tetrahedron diagram, I will then show that the low density hyperspace energy with its low speed of light is able to pull the rim out of dimension so that it can merge with the tree at the moment the lightning strikes.
__________________
 
Reply With Quote
  #41  
Old 05-18-2017, 06:59 PM
Allen Burgess Allen Burgess is online now
Gold Member
 
Join Date: Sep 2011
Posts: 1,461
Counter roatating "A" vectors

Here's how it works:
__________________
 

Last edited by Allen Burgess; 06-12-2017 at 02:39 PM.
Reply With Quote
Sponsored Links
  #42  
Old 05-18-2017, 10:07 PM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
Quote:
Originally Posted by Allen Burgess View Post
@Gambeir,

Here it is, your tornado theory at work:

BACKGROUND OF THE INVENTION

[0002]

The idea for this coil configuration comes from the observation of powerful thunderstorms, as described by physicist Dr. Richard Feynman in his Lectures on Physics, a copy of which is enclosed as a reference. Upon reading his explanation, I realized that the thunderstorm is actually a hyperspace physics phenomenon.


[0003]

After the passage of a large lightning storm, people have observed that a car tire rim has merged with the trunk of a tree growing in the ground. Due to the large branches of the tree, there is no possible way that it could slide down the branches and around the trunk. It was observed also that a straw of wheat became embedded in the hard wood of a telephone pole. It turns out that the thunderstorm offers an explanation as to how this can occur.


[0004]

After reading Feynman's explanation, it can be seen that the key to this phenomenon is that there is a downward and an upward lightning bolt, sometimes occurring together if the leader branches into two paths. Bolts of lightning also like to strike tall objects such as telephone poles or trees. Now an electrical current moving downward produces a clockwise magnetic B field, as seen from above. On the return stroke, the current is moving upward which produces a counterclockwise magnetic B field. Thus the thunderstorm produces two huge bucking magnetic B fields which is the magnetic geometry of this magnetic vortex generator. Using my tetrahedron diagram, I will then show that the low density hyperspace energy with its low speed of light is able to pull the rim out of dimension so that it can merge with the tree at the moment the lightning strikes.
Excellet work there Allen. Kind of throws me for a tizzy right now: Maybe will make more sense once I digest it more. Right off the top of my head the explanation given makes sense out of the Hutchinson Effect; seems like the Philadelphia experiment, Montauk, and others might not be that far fetched after all huh? Maybe that PDF link I sent you wasn't so wacked out after all?

Hmm....danged interesting....

Now I have been working to piece together a more complete understanding of nuclear spin states and their relationship to crystals and ferromagnetic metals. Specifically beginning with the Wallace inventions. See this link on the topic. Excellent information on the Wallace inventions.

The Wallace Inventions, Spin Aligned Nuclei, The Gravitomagnetic Field, and The Tampere Experiment: Is there a connection?
By: Robert Stirniman, May 1998
The Wallace Inventions, Spin Aligned Nuclei, The Gravitomagnetic Field, And The Tampere Experiment: Is There A Connection?

"Wallace's experiments were based on aligning the nuclear spin of elements and isotopes which have an odd number of nucleons. These materials are characterized by a total nuclear spin which is an odd integral multiple of one-half, resulting in one nucleon with un-paired spin. Wallace drew an analogy between the un-paired angular momentum in these materials, and the un-paired magnetic moments of electrons in ferromagnetic materials."

"Ferroelectricity, property of certain nonconducting crystals, or dielectrics, that exhibit spontaneous electric polarization (separation of the centre of positive and negative electric charge, making one side of the crystal positive and the opposite side negative) that can be reversed in direction by the application of an appropriate electric field."
https://www.britannica.com/science/ferroelectricity

You guys may want to examine this white paper on Crystals.
Crystals | Free Full-Text | Ultrafast Electron and Molecular Dynamics in Photoinduced and Electric-Field-Induced Neutral–Ionic Transitions | HTML
__________________
 

Last edited by Gambeir; 05-18-2017 at 10:20 PM.
Reply With Quote
  #43  
Old 05-18-2017, 10:19 PM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
Quote:
Originally Posted by Allen Burgess View Post
Take a look at this patent. Vortexing magnetic field on the horizontal plane:

Link to "Rotating Electrostatic Propulsion System":

https://www.google.com/patents/US200...wcAKQQ6AEIWDAH

BRIEF SUMMARY OF THE INVENTION

[0001]

The invention, which is the object of my present application, is a spacecraft propulsion system which develops a spacetime curvature tension utilizing a combination of a rotating radial electrostatic field and a fixed vertical electrostatic field. The two fields create a stress-energy Tzr gradient in the radially direction which is equal to force. The radial field is created on the side of a charged rotating cylinder on the underside of the hull. The vertical field is created by an annular charged ring concentric with the cylinder. Three rotating cylinders are located in a triangle on the bottom of the hull in order to produce a force in any direction in the horizontal plane.


I have to say this is kind of shocking...actually...
I say this because it occurred to me that what I've posted could be mistaken for plagiarism, low level plagiarism, but plagiarism nevertheless.
Well I had no knowledge of this patent, and I doubt that I would have understood it had I not done the work that I have in trying to make sense
of the ARV.

This is interesting; the patent says -"7. Electric polarity switching of the fields in order to reverse the spacetime curvature and therefore change the direction of thrust."This ties in with the ferroeletics and crystals; which is making more sense now because of the amount of money being put in to R&D in those fields


"8. The use of a magnetic vortex generator located above each thruster in order to permeate the cylinders and rings with low density hyperspace energy which would substitute for the embedded magnets in each cylinder."



https://www.google.com/patents/US200...wcAKQQ6AEIWDAH
__________________
 

Last edited by Gambeir; 05-18-2017 at 10:38 PM.
Reply With Quote
  #44  
Old 05-18-2017, 10:52 PM
Allen Burgess Allen Burgess is online now
Gold Member
 
Join Date: Sep 2011
Posts: 1,461
Counter rotating magnet feilds.

Apparently those patents were released yesterday. They confirm everything we've theorized about.

This is a 1 second video:

https://www.youtube.com/watch?v=t2GI5AgBJCo
__________________
 
Reply With Quote
  #45  
Old 05-19-2017, 01:33 PM
Allen Burgess Allen Burgess is online now
Gold Member
 
Join Date: Sep 2011
Posts: 1,461
Pyrolytic pilot

Here we see an ant riding on a magnetically levitated piece of pyrolytic graphite. The TR-3B hull is made from the same material and hovers over the spiraling "A' vector magnetic vortex field underneath:
__________________
 

Last edited by Allen Burgess; 06-12-2017 at 02:39 PM.
Reply With Quote
  #46  
Old 05-19-2017, 05:08 PM
Allen Burgess Allen Burgess is online now
Gold Member
 
Join Date: Sep 2011
Posts: 1,461
"A" vector test.

I got some apparent lift this morning from the diametric magnet attached to the end of a wash tub pump motor. I initially was holding the magnet on the perpendicular to an overhead plastic dinner plate. I realized I was on the wrong plane , and when I re-tried it side ways, Lo and behold, it began to lift the plate as I pushed upwards towards it!

I need to try it again with a barrier to make sure it's not air lift, but it's an exciting result nevertheless.
__________________
 

Last edited by Allen Burgess; 05-19-2017 at 05:18 PM.
Reply With Quote
  #47  
Old 05-19-2017, 08:37 PM
Allen Burgess Allen Burgess is online now
Gold Member
 
Join Date: Sep 2011
Posts: 1,461
"A' vector wind hood test.

I covered the wash tub pump motor and neo tube magnet with a ceramic pot, and got the same lift effect on the plastic dinner plate suspended overhead; So it's definitely the magnetic vortex supplying the lift not he air draft.

The thumbnail sketch below illustrates the direction of diametric tube magnet spin and the plane of the spiraling "A" vector that projects outward away from the magnet. This spiraling field forms a "Magnetic Cushion":

The plastic plate is non-magnetic, but there's a "Lenz Effect" from the magnetic vortex that generates an electrical field. This is causing a powerful static repulsion.
__________________
 

Last edited by Allen Burgess; 06-12-2017 at 02:39 PM.
Reply With Quote
  #48  
Old 05-20-2017, 05:02 AM
ET-Power's Avatar
ET-Power ET-Power is offline
Senior Member
 
Join Date: Feb 2017
Location: Republic of California
Posts: 101
Quote:
Originally Posted by Allen Burgess View Post
Take a look at this patent. Vortexing magnetic field on the horizontal plane:

Link to "Rotating Electrostatic Propulsion System":

https://www.google.com/patents/US200...wcAKQQ6AEIWDAH

BRIEF SUMMARY OF THE INVENTION

[0001]

The invention, which is the object of my present application, is a spacecraft propulsion system which develops a spacetime curvature tension utilizing a combination of a rotating radial electrostatic field and a fixed vertical electrostatic field. The two fields create a stress-energy Tzr gradient in the radially direction which is equal to force. The radial field is created on the side of a charged rotating cylinder on the underside of the hull. The vertical field is created by an annular charged ring concentric with the cylinder. Three rotating cylinders are located in a triangle on the bottom of the hull in order to produce a force in any direction in the horizontal plane.
I saw a TR3B in 2009/2010 leaving the Scientology Center in Hollywood, California.. it was only 10:30pm or so at night... It slowly hovered above the Scientology Complex and then like a streaking light in Star Wars/Trek, etc... it took a 90* angle and was off into space-time/transdimensional travel. It had an orange *PLASMA* glow from the bottom center.

I swear under penalty of perjury for forgoing facts are true.
__________________
"Rebellion to tyrants is obedience to God." - Benjamin Franklin + Thomas Jefferson
Reply With Quote
  #49  
Old 05-20-2017, 05:03 AM
ET-Power's Avatar
ET-Power ET-Power is offline
Senior Member
 
Join Date: Feb 2017
Location: Republic of California
Posts: 101
Quote:
Originally Posted by Gambeir View Post
I have to say this is kind of shocking...actually...
I say this because it occurred to me that what I've posted could be mistaken for plagiarism, low level plagiarism, but plagiarism nevertheless.
Well I had no knowledge of this patent, and I doubt that I would have understood it had I not done the work that I have in trying to make sense
of the ARV.

This is interesting; the patent says -"7. Electric polarity switching of the fields in order to reverse the spacetime curvature and therefore change the direction of thrust."This ties in with the ferroeletics and crystals; which is making more sense now because of the amount of money being put in to R&D in those fields


"8. The use of a magnetic vortex generator located above each thruster in order to permeate the cylinders and rings with low density hyperspace energy which would substitute for the embedded magnets in each cylinder."



https://www.google.com/patents/US200...wcAKQQ6AEIWDAH
You're the man Gambier and onto it!!!!

Keep at it man!
__________________
"Rebellion to tyrants is obedience to God." - Benjamin Franklin + Thomas Jefferson
Reply With Quote
  #50  
Old 05-21-2017, 04:33 PM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
Quote:
Originally Posted by ET-Power View Post
You're the man Gambier and onto it!!!!

Keep at it man!
Actually I think it's Allen that's the man but thanks.

As for your sighting, well I've seen one myself quite clearly for about 2 or 3 seconds, basically hovering over the house a few thousand feet up and it also took off at a several thousands of miles per hour. I'm guessing mach 6 or higher. Really it was so blindingly fast that no human eye could track it. At 32 frames per second you're going to get 2 or 3 frames in that one second with which to decide if you've actually seen something, so unless you see it sitting still you're just not going see the thing because it's moving that fast.

Totally believe you ET. There was a good video captured recently of a triangular craft like the one I saw. That one was captured over Mt. Baldy in California. It was a ways off, but clear and the best one I'd seen so far, but then the poster removed the video after only a couple days and there are no copies on Scrub Tube. I asked the poster if he was visited by men in black (gov-corp stooges) and he just said to forget about the video. That it must have been swamp gas, a balloon, his imagination.

We got er figured goons...so just give it up: We is hip to the trip now.

I feel it's coming together now. That we have a solid idea how it works and what the primary parts to the machine are. It's just a matter of time now.
People have the information now. They cannot stop the outcome any longer.
__________________
 

Last edited by Gambeir; 05-21-2017 at 05:17 PM.
Reply With Quote
  #51  
Old 05-21-2017, 05:14 PM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
Quote:
Originally Posted by Allen Burgess View Post
I covered the wash tub pump motor and neo tube magnet with a ceramic pot, and got the same lift effect on the plastic dinner plate suspended overhead; So it's definitely the magnetic vortex supplying the lift not he air draft.

The thumbnail sketch below illustrates the direction of diametric tube magnet spin and the plane of the spiraling "A" vector that projects outward away from the magnet. This spiraling field forms a "Magnetic Cushion":

The plastic plate is non-magnetic, but there's a "Lenz Effect" from the magnetic vortex that generates an electrical field. This is causing a powerful static repulsion.
I don't know what to say Allen....Amazing! Just fricking Amazing. You're the man....very inspirational work Allen.

This is because of the Gadgetmall Coanda ya know. So that is now a virtual success story really.

Gadgetmall Coanda OU UFO.

Starting to come together for me mentally now. Took time to study the first patent and now see clearly, I think, the links to the ARV's system.


Quote:
Originally Posted by Allen Burgess View Post
Take a look at this patent. Vortexing magnetic field on the horizontal plane:

Link to "Rotating Electrostatic Propulsion System":

https://www.google.com/patents/US200...wcAKQQ6AEIWDAH
I am now studying the second patent.

https://www.google.com/patents/US200...wcAKQQ6AEIWDAH
__________________
 
Reply With Quote
Sponsored Links
  #52  
Old 05-21-2017, 05:46 PM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
Quote:
Originally Posted by Allen Burgess View Post
Here we see an ant riding on a magnetically levitated piece of pyrolytic graphite. The TR-3B hull is made from the same material and hovers over the spiraling "A' vector magnetic vortex field underneath:
I know you're right about this: It's the magnetic vortex and Pyrolytic Graphite.

About 20 or so years ago, I was flying model planes and was a member of this club which was almost completely made up of Navy Fighter Jocks and retired aerospace engineers.

So I bulit a model of the F-117 and took it to our little meeting where I was naturally required to blab about it. Well so I'm giving one my typical dangerous armchair ideas about the materials used in stealth, at that time largely unknown, and I said that I thought the fuselage was carbon fiber.

Fortunately, in a rare moments of lucidity I thought to ask a brilliant engineer named Dan Simenson what he thought.

Simenson, then in his 60's was a retired engineer whom primarily worked on spy satellites. This was a brilliant individual. Well long story short is that inside of 60 seconds we were all lost in the complexities of nuclear spin states and how this then meant that the material wasn't carbon fiber at all, rather it was a Graphite Composite, and that the Radar Waves inter-react's with the nuclear spin states of the graphite to deflect the electromagnetic waves. That is, there is a vector resulting from the incoming radar which because of the angles of the panels that make up the body of the aircraft, it's fuselage, there then is formed a reflected electromagnetic wave to another vector away from the aircraft, as opposed to being reflected directly back to the radar as with typical materials.

Well needless to say, no one other than Simenson had any idea what in hell he was talking about. Not at that time, and certainly not me, but today I can at least now gather what Dan was trying to tell all us chimps...LOL!

I suppose that most of what Dan left behind for the rest of us is still locked up vaults, but this here I post in his memory.
Links from the great people at The Outer Zone. A free model airplane website. Outerzone : Free plans : Collection of free vintage model aircraft plans to download
http://outerzone.co.uk/planfile_supp...ticle_2274.pdf
http://outerzone.co.uk/plan_files_02...205_oz1222.pdf
__________________
 

Last edited by Gambeir; 05-21-2017 at 05:52 PM.
Reply With Quote
  #53  
Old 05-21-2017, 06:13 PM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
Quote:
Originally Posted by Allen Burgess View Post
I covered the wash tub pump motor and neo tube magnet with a ceramic pot, and got the same lift effect on the plastic dinner plate suspended overhead; So it's definitely the magnetic vortex supplying the lift not he air draft.

The thumbnail sketch below illustrates the direction of diametric tube magnet spin and the plane of the spiraling "A" vector that projects outward away from the magnet. This spiraling field forms a "Magnetic Cushion":

The plastic plate is non-magnetic, but there's a "Lenz Effect" from the magnetic vortex that generates an electrical field. This is causing a powerful static repulsion.
I recommend trying this.

Take a pencil (graphite) and cover the pie plate by drawing on it and then repeat the test.

Depending on results there may be other possible arrangements. Mere outline of shapes and forms; pyramids, tetrahedrons, ect, or by formed shapes made with glued paper and again possibly covered once more in graphite from a pencil, or possibly without: Unknown which will serve best right now.

*NOTE: It is known that the mere drawing of an electronic circuits can effect an result.
Mind Machines You Can Build by G. Harry Stine
__________________
 

Last edited by Gambeir; 05-21-2017 at 06:21 PM.
Reply With Quote
  #54  
Old 05-22-2017, 01:35 AM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
Quote:
Originally Posted by Allen Burgess View Post
I got some apparent lift this morning from the diametric magnet attached to the end of a wash tub pump motor. I initially was holding the magnet on the perpendicular to an overhead plastic dinner plate. I realized I was on the wrong plane , and when I re-tried it side ways, Lo and behold, it began to lift the plate as I pushed upwards towards it!

I need to try it again with a barrier to make sure it's not air lift, but it's an exciting result nevertheless.

I did a quick scan for information on St. Clair as a pseudonym and came up with this. ZPi | St. Clair: Hyperinventor

http://appft1.uspto.gov/netacgi/nph-...S1=20060071122

Full body teleportation.
https://www.google.com/patents/US200...wcAKQQ6AEIWDAH
and image here
Patent Images


Don't laugh....I am pretty confident this real, or something like it is. This isn't half as far fetched as some may imagine. Now then, the results of your first experiments makes sense based on the St.Clair patent below. I am studying this one now. I've posted a list of some of the St.Clair Patents. Undoubtedly there are more. Appears to be a pseudonym of some kind. So now about the results of a magnetic vortex are explained in the St. Clair Magnetic Vortex Generator.

"[0023]
4. In another patent application of mine entitled Magnetic Vortex Generator, it was shown that a rotating cylinder containing embedded and stacked bar magnets produces a negative mass and negative spacetime spring constant.

It can be shown that this combination produces a small wormhole or interdimensional connection between our space and hyperspace along the centerline of the rotating cylinder.

Co-dimensions of hyperspace have different physics constants. A low pressure region of hyperspace has a very low mass density and a very low speed of light.

The wormhole allows this low density hyperspace energy to enter into our space and permeate the cylinder and annular ring. The permittivity is proportional to the inverse of the speed of light squared.

The hyperspace speed of light, obtained from my tetrahedron physics diagram, is 8971 meters per second. The speed of light in our dimension is 299792458 meters per second.

As shown by the enclosed reference calculation, the hyperspace permittivity is about a trillion times larger. Because the force is equal to this new permittivity times the electric fields squared times the area around cylinder, the force is greatly amplified by this increase in the permittivity of space."

Magnetic Vortex Generator
https://www.google.com/patents/US20030197093
https://docs.google.com/viewer?url=p...0030197093.pdf

Bobbin electromagnetic field propulsion vehicle
https://docs.google.com/viewer?url=p...0030209636.pdf
https://www.google.com/patents/US200...kc4ChDoAQgoMAE

Electric dipole moment propulsion system
https://docs.google.com/viewer?url=p...0060070371.pdf
https://www.google.com/patents/US200...UODlAQ6AEIQjAE

Electric dipole spacecraft
https://docs.google.com/viewer?url=p...0060038081.pdf
https://www.google.com/patents/US200...xg4ChDoAQg9MAQ

Photon spacecraft
https://docs.google.com/viewer?url=p...0060144035.pdf
https://www.google.com/patents/US200...Qk4FBDoAQgvMAI

Rotor inductance propulsion system
https://www.google.com/patents/US200...UODlAQ6AEINDAC

Hyperspace torque generator
https://www.google.com/patents/US200...UODlAQ6AEISTAF

Remote viewing amplifier
https://www.google.com/patents/US200...w04ChDoAQhZMAg


Permanent magnet propulsion system (*Battery NeoMagentic Wound Copper Wire Train as seen on Youtube) Know this one works for sure.
https://www.google.com/patents/US200...UODlAQ6AEIXjAI
__________________
 

Last edited by Gambeir; 05-22-2017 at 01:39 AM.
Reply With Quote
  #55  
Old 05-22-2017, 02:31 AM
Allen Burgess Allen Burgess is online now
Gold Member
 
Join Date: Sep 2011
Posts: 1,461
Magneticd vortex generator

Quote from "Magnetic Vortex Generator " patent:

"Two separate, but electrically connected, toroidal coils of differing radii, carry magnetic flux in opposite directions about their common centerline".

Quadra project:

The coils visibly move upward against gravity when excited:
Attached Images
File Type: jpg coilsmove.jpg (8.2 KB, 24 views)
__________________
 

Last edited by Allen Burgess; 05-22-2017 at 02:34 AM.
Reply With Quote
  #56  
Old 05-22-2017, 12:26 PM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
Quote:
Originally Posted by Allen Burgess View Post
Quote from "Magnetic Vortex Generator " patent:

"Two separate, but electrically connected, toroidal coils of differing radii, carry magnetic flux in opposite directions about their common centerline".

Quadra project:

The coils visibly move upward against gravity when excited:

Nail ejected from same arrangement.




I know this will seem like a joke but it's not. Remember* Never apply full power first! I don't need you teleported off world. Later might be Ok, when we have idea what's going on, but not right this second. Understand? Now along those lines, Spacecase0 turned me on to this interesting site, which involves a real case of teleportation among other possible uses: Worth looking at for a couple reasons. One reason is the antenna system mentioned in the ARV, and in the St. Clair Patents, and the other is of course the potential for teleportation. Meaning what to watch for if you want to stay here with the rest of the pathetic left overs....snort! Humor, mind you.



spacewarp
spacewarp

Teleportation: The Science Behind Bruce Gernon’s Flight
spacewarp

Here's a video on the experience. You will want to note what Gernon says about the tunnel he flys through at about the 1:45 mark in the video.




I only have some cheap flat magnets which have the poles on either side of the flats so that's a hold up for me right now. I'd like to make a cylinder with bar magnets arranged along spirals. One which is capable of having a secondary tube inserted inside. Bar magnets simplify the test arrangements. It would seem that the St. Clair Patent was formed around experimentation with that arrangement. Which is beginning to explain why the core tube in the ARV is likely to contain an electrically conductive gas because it will be complex enough just using magnets. Otherwise, maintaining electrical contacts by some means, while having to deal with high speed rotating charged tubes will be an involved process. An electrically conductive gas would then be the best and most reliable form of charge carrier.

As a suggestion; For a test purposes an old blender motor has relatively high speeds. I found one at a 2nd hand store so now I just need some good bar magnets.
Also I might mention here that the sources to consult for laying out spiral lines on tubes are to be found from gun barrel rifiling

*Note: The purpose of the image shown is to illustrate how to lay out a spiral twist on a tube, and how to lay out the twist rate, such as 1 twist (*rotation) in 48 inches. See that in the drawing in the left corner of the image where it shows a vertical line drawn from the centerline of the tube and going down 4 inches, and from there going once more back up to the centerline of the rear of the tube. Along that vector layout a chalk line and roll the tube over the chalk.

http://img.photobucket.com/albums/v4...ngmachine1.jpg

The PDF link shows how to make an antique barrel rifling machine, and therefore it shows how to layout and cut groves in turned wooden tube, which is information necessary for any accurate layouts of spirals on or inside of tubes, for it may be that laying out electrical lines or magnets inside a tube is better due to the rotational speeds and centrifugal forces involved.

http://www.survivorlibrary.com/libra...ng_machine.pdf
__________________
 

Last edited by Gambeir; 05-22-2017 at 12:42 PM.
Reply With Quote
  #57  
Old 05-22-2017, 07:56 PM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
Quote:
Originally Posted by Allen Burgess View Post
Here's how it works:

Magnetic vortex wormhole generator
https://www.google.com/patents/US20030197093

ABSTRACT
This invention relates to a magnetic vortex generator which has the ability to generate negative mass and a negative spring constant which, according to Einstein's General Theory of Relativity, is required in order to create a stable wormhole between our space and hyperspace. Two separate, but electrically connected, toroidal coils of differing radii, carry magnetic flux in opposite directions about their common centerline. According to Maxwell's equation, this produces bucking electric fields along said centerline. Because the two solenoids have different radii, the parallel spring constant of both coils is negative. The negative mass together with the negative spring constant produce a real resonant frequency which can distort the spacetime curvature due to the creation of powerful spikes of negative mass. This phenomenon, similar to the common electrical thunderstorm, opens up a wormhole into hyperspace through which low-density hyperspace energy can enter into our dimension. This energy finds many application in new types of power supplies, inertia-less and mass-less spacecraft, vehicles that can travel light-years by moving out of dimension through hyperspace, surgery-less medical tables, cranes for lifting heavy objects, cold-welded crystals for crystal rotors, folding space waveguides, and electromagnetic field propulsion vehicles using highly relativistic fields.

Now if you look at the images from the folks over at Spacewarp on their science of Bruce Gernon's interupted journey, or accelerated one if you prefer, then there appears to be some support to this idea.
[url=http://www.spacewarpdynamicsllc.com/[/url]
https://static.wixstatic.com/media/0...3e3e9dd9c5.png

And another thing> Ya know how they are always saying these UFO's have strange hieroglyphics or writing on them. Well just look at what the spacewarp people have created. Now if that's working as
an antenna, and applied to the exterior of machines then I suppose most people would try to explain it as writing or some kind.


Bucking Gap Image located at:
https://www.overunityresearch.com/in...?topic=3107.75
Attached Images
File Type: png Bucking Gap.png (16.0 KB, 15 views)
__________________
 

Last edited by Gambeir; 05-22-2017 at 08:11 PM.
Reply With Quote
  #58  
Old 05-25-2017, 06:55 AM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
This is interesting to scan over. It's a study on how to possibly simply the visualization of vortex's in 3 dimension by using multiple micro-magnets. Thee are some interesting effects noted in the study on the properties of multiple spinning magnets.

Three-Dimensional Dynamic Self-Assembly of Spinning Magnetic Disks: Vortex Crystals https://gmwgroup.harvard.edu/pubs/pdf/766.pdf

Extract-
Conclusions and Outlook
- The theoretical description and controlled experimental realization of vortex-vortex interactions in three dimensions are often prohibitively complicated: the experimental simplicity of our system might offer a remedy to these problems. (ii) In self-assembly and materials science, the systems of spinning objects can serve as precursors for open lattices to be used in photonic band gap materials -

A discussion here on optical vers photonic band gap.
https://www.researchgate.net/post/Wh...tonic_band_gap

Photonic band structure for a superconductor-dielectric superlattice
https://ir.nctu.edu.tw/bitstream/115...4163400004.pdf
__________________
 
Reply With Quote
  #59  
Old 06-03-2017, 09:05 PM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
I apologize to all of you because, ya know, I'm a pretty simple guy. Not educated in this stuff at all, so it's hard for me to link up the technology to construct a case. As a result, I've been slow to comprehend the totality of the Alien Reproduction Vehicle. This shouldn't be all that surprising since this is essentially a very early machine, and like many early machines the arrangement of the components isn't likely to be advanced. A comparative history of the evolution of machines shows how as the understanding develops then so too do the machines themselves. In other words, to use an analogy here, it's actually easier to understand how an airplane like a piper cub flys than it would be to try to understand how the wright brothers first plane flew.

Gravity Waves and the ARV's Antenna System.

What I had previously thought was a kind of atmospheric vacuum, and collecting ions for a fuel source, now appears to be incorrect. Mark McCandlish said that he thought the ARV had an antenna; which was this ring which forms the base of the platform where the crew door appears, and evidently this idea is well founded. A reading of the St. Clair patents shows that this ring like structure is a type of antenna. It's evidently a component of a gravity wave drive system. The authority on Gravity Waves, aside from Einstein , and whom we can't talk to so far as we know, appears to be Dr. Robert Baker.

Patent
Gravitational wave propulsion
https://www.google.com/patents/US20070001541

This AAG (*American Antigravity) page has links to video's on Youtube by Dr. Baker. Robert Baker, Jr on High-Frequency Gravitational Waves

Robert Baker on HFGW Fusion Energy
Robert Baker’s Open-Cavity HFGW Gravitational Wave Detector
Robert Baker on HFGW Remote Imaging & Surveillance
Robert Baker, Jr. on Chinese HFGW Research
Gravitational Communications for Telecommunications
How To Generate High-Frequency Gravitational Waves

And other additional video links there as well.
Gary Stephenson on High Frequency Gravitational Waves

Now there are a plethora of issues going on here as a result of this latent epiphany and which should actually concern everyone everywhere. Too many to be brought forward here in total, but these include; Sub-space communications, almost certain to be in use right now, contrary to what the Jason Report by the Federation of American Scientists would have you believe.

Dr. Baker releases this volume as a primer that presents the most basic elements of gravitational waves.
Renowned Expert, Dr. Robert Baker, Publishes Primer on Gravitational Waves
Gravitational Waves -- The World of Tomorrow, A Primer
https://books.google.com/books/about...vgAACAAJ&hl=en
https://www.amazon.com/Gravitational.../dp/B01MF6CJJW

Now this ...this is an interesting paper for someone like myself because you may recall how I mentioned that the first people to take note of antigravity effects were those scientists whom designed and witnessed the first atomic bomb tests, and what this suggests, as was hinted at in Dr Steven Greer's movie; "Disclosure" is that these nut cases have disturbed or even damaged civilizations far and wide across the galaxy by sending a gravitational shock wave across the proverbial universe: One can only imagine what other advanced societies may think about humans if this is the reality, and it does seem to look like that is the real motivation for alien visitations: Insane people with too much money and not enough brains and whose wealth and power is all based on creating fear, war, and death isn't likely to be a successful pathway to advancement or even survival. If not by our own hands than by others if necessary.

Generation of Gravitational Waves with Nuclear Reactions
http://www.drrobertbaker.com/docs/Am...hys.%20160.pdf

So now the reason I've posted all this really has to do with a tiny bit of obscure info, now mostly scrubbed off the net by enemies of humanity, and that happens to be the Chris Hardeman Experiment.

http://jnaudin.free.fr/html/gravshld.htm



__________________
 

Last edited by Gambeir; 06-04-2017 at 06:36 PM.
Reply With Quote
  #60  
Old 06-04-2017, 09:00 AM
Gambeir's Avatar
Gambeir Gambeir is offline
Senior Member
 
Join Date: Aug 2016
Location: Peoples republic of Washington
Posts: 226
As this information seems to grow legs on a regular basis I'm gonna post these images so that some may choose to safeguard them as they see fit. This is the crop circle Chris based his experiments on. Barbury Castle Crop Circle 1991.

*Note.
Generally speaking, it seems as though every lunatic has taken the image of the Barbury Castle Crop Circle and somehow or other self-constructed the second coming of Jesus Christ. Don't be deceived because even to someone like myself, a completely ignorant person electronically speaking, this is an obvious depiction of a microwave cyclotron, and we all know that microwaves have of course long been associated with UFO's and cropcircles.


Now the problem with the Haldeman experiment is that it too is missing parts, just like so many others, and here I think one has to refer back to the St. Clair patents. Specifically this one. What's that in the middle of that cropcircle? A magnetic vortex generator?
https://docs.google.com/viewer?url=p...0030197093.pdf

As an footnote; note how the information in this rather small image shows how some of these cropcircles have a great resemblance to Telsa's work.
http://www.cropcirclesecrets.org/cci...rcles_6003.gif

Note that there are three sphere's set in a triangle and each one is showing the primary components which drive the sphere's. There's the cyclotron producing microwaves, there's the depiction of the separations of charges, there's the sphere with what appears to be a stick inside it, but which is, in reality, an dipole antenna.(*Well either it's an antenna or it's a representation of the microwave's cathode. Right now I'm thinking that's what it is.)


The Physics of Microwave Ovens


DREAMS OF THE GREAT EARTH CHANGES

Satellite Power Station
https://www.slideshare.net/Biswajit_...-power-station



The Production of Microwaves in a Magnetron
The Physics of Microwave Ovens

http://askphysics.com/wp-content/upl...agnetronop.gif

GBPPR Homebrew Radar Experiment Magnetron Pulse Transforme. Site probably contains useful information. One image link I've included.
http://gbppr.dyndns.org/~gbpprorg/mi...dar/pulse.html
http://gbppr.dyndns.org/~gbpprorg/mi...ar/pulse-1.png


This link involves an extreme effort. It's worth examining in detail. I may comment on this further later, but posting it for reference and so that I don't forget all about it. The field drawing showing a steel ball is nearly a replication of plasmoid, another antigravitational plasma which has been invading our skys for quite a while, but much more commonly as of recent and is often mistaken for a UFO.
The Institute of Paranormal Science - The Antigravity Theories of Fran De Aquino
__________________
 

Last edited by Gambeir; 06-04-2017 at 06:33 PM.
Reply With Quote
Reply

Tags
vehicle, drawing, provided, thought, technical, forum, began, assumptions, mccandish, reproduction, acquired, alien, mark, post, deductions, deduce, process, long, labored, attempting, years, war, form, global, concepts

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Please consider supporting Energetic Forum with a voluntary monthly subscription.

For One-Time Donations, use admin@ this domain > energeticforum.com

Choose your voluntary subscription

All times are GMT. The time now is 02:10 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v1.4.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.8 (Lite) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
2007-2015 Copyright - Energetic Forum - All Rights Reserved

Bedini RPX Sideband Generator

Tesla Chargers